diff options
| author | Alan Douglas <adouglas@cadence.com> | 2021-07-21 21:28:36 +0530 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2021-07-27 10:57:12 +0530 |
| commit | 39b823381d9d27537c032010bdaf005aa60df9a3 (patch) | |
| tree | bec45f0d66be0560b417b9a7283801de01c90b2a /drivers/phy/Kconfig | |
| parent | 2b0f7dee5fcd71de11faf2d096d22b241ce920d7 (diff) | |
phy: cadence: Add driver for Sierra PHY
Add a Sierra PHY driver with PCIe and USB support.
This driver is a port from the mainline linux driver.
The PHY has multiple lanes, which can be configured into
groups, and a generic PHY device is created for each group.
There are two resets controlling the overall PHY block, one
to enable the APB interface for programming registers, and
another to enable the PHY itself. Additionally there are
resets for each PHY lane.
The PHY can be configured in hardware to read register
settings from ROM, or they can be written by the driver.
The sequence of operation on startup is to enable the APB
bus, write the PHY registers (if required) for each lane
group, and then enable the PHY. Each group of lanes
can then be individually controlled using the power_on()/
power_off() function for that generic PHY
One difference with the linux driver is that the PHY is
always reset after it is powered-on. This is because role
switching is not supported in u-boot and the cable
orientation is handled by the PHY reset.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-8-kishon@ti.com
Diffstat (limited to 'drivers/phy/Kconfig')
| -rw-r--r-- | drivers/phy/Kconfig | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 80ae1af329..da644462d9 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -282,4 +282,6 @@ config PHY_IMX8MQ_USB Support the USB3.0 PHY in NXP i.MX8MQ SoC source "drivers/phy/rockchip/Kconfig" +source "drivers/phy/cadence/Kconfig" + endmenu |