Merge branch 'master' of git://git.denx.de/u-boot-sunxi

- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers

2 files changed, 91 insertions, 49 deletions

diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index c9798445c7..98bd7a5823 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -14,12 +14,14 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <fdt_support.h>
 #include <linux/err.h>
 #include <malloc.h>
 #include <miiphy.h>
 #include <net.h>
+#include <reset.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 #ifdef CONFIG_DM_GPIO
 #include <asm-generic/gpio.h>
@@ -135,6 +137,8 @@ struct emac_eth_dev {
 	phys_addr_t sysctl_reg;
 	struct phy_device *phydev;
 	struct mii_dev *bus;
+	struct clk tx_clk;
+	struct reset_ctl tx_rst;
 #ifdef CONFIG_DM_GPIO
 	struct gpio_desc reset_gpio;
 #endif
@@ -285,10 +289,18 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 	int ret;
 	u32 reg;
 
-	reg = readl(priv->sysctl_reg + 0x30);
+	if (priv->variant == R40_GMAC) {
+		/* Select RGMII for R40 */
+		reg = readl(priv->sysctl_reg + 0x164);
+		reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
+		       CCM_GMAC_CTRL_GPIT_RGMII |
+		       CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY);
 
-	if (priv->variant == R40_GMAC)
+		writel(reg, priv->sysctl_reg + 0x164);
 		return 0;
+	}
+
+	reg = readl(priv->sysctl_reg + 0x30);
 
 	if (priv->variant == H3_EMAC) {
 		ret = sun8i_emac_set_syscon_ephy(priv, &reg);
@@ -639,9 +651,24 @@ static int sun8i_eth_write_hwaddr(struct udevice *dev)
 	return _sun8i_write_hwaddr(priv, pdata->enetaddr);
 }
 
-static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
+static int sun8i_emac_board_setup(struct emac_eth_dev *priv)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int ret;
+
+	ret = clk_enable(&priv->tx_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable TX clock\n");
+		return ret;
+	}
+
+	if (reset_valid(&priv->tx_rst)) {
+		ret = reset_deassert(&priv->tx_rst);
+		if (ret) {
+			dev_err(dev, "failed to deassert TX reset\n");
+			goto err_tx_clk;
+		}
+	}
 
 	if (priv->variant == H3_EMAC) {
 		/* Only H3/H5 have clock controls for internal EPHY */
@@ -656,26 +683,11 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
 		}
 	}
 
-	if (priv->variant == R40_GMAC) {
-		/* Set clock gating for emac */
-		setbits_le32(&ccm->ahb_reset1_cfg, BIT(AHB_RESET_OFFSET_GMAC));
-
-		/* De-assert EMAC */
-		setbits_le32(&ccm->ahb_gate1, BIT(AHB_GATE_OFFSET_GMAC));
+	return 0;
 
-		/* Select RGMII for R40 */
-		setbits_le32(&ccm->gmac_clk_cfg,
-			     CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
-			     CCM_GMAC_CTRL_GPIT_RGMII);
-		setbits_le32(&ccm->gmac_clk_cfg,
-			     CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
-	} else {
-		/* Set clock gating for emac */
-		setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
-
-		/* De-assert EMAC */
-		setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
-	}
+err_tx_clk:
+	clk_disable(&priv->tx_clk);
+	return ret;
 }
 
 #if defined(CONFIG_DM_GPIO)
@@ -802,10 +814,14 @@ static int sun8i_emac_eth_probe(struct udevice *dev)
 	struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev);
 	struct eth_pdata *pdata = &sun8i_pdata->eth_pdata;
 	struct emac_eth_dev *priv = dev_get_priv(dev);
+	int ret;
 
 	priv->mac_reg = (void *)pdata->iobase;
 
-	sun8i_emac_board_setup(priv);
+	ret = sun8i_emac_board_setup(priv);
+	if (ret)
+		return ret;
+
 	sun8i_emac_set_syscon(sun8i_pdata, priv);
 
 	sun8i_mdio_init(dev->name, dev);
@@ -834,8 +850,8 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
 	int offset = 0;
 #ifdef CONFIG_DM_GPIO
 	int reset_flags = GPIOD_IS_OUT;
-	int ret = 0;
 #endif
+	int ret;
 
 	pdata->iobase = devfdt_get_addr(dev);
 	if (pdata->iobase == FDT_ADDR_T_NONE) {
@@ -850,25 +866,35 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
 		return -EINVAL;
 	}
 
-	if (priv->variant != R40_GMAC) {
-		offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
-		if (offset < 0) {
-			debug("%s: cannot find syscon node\n", __func__);
-			return -EINVAL;
-		}
-		reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
-		if (!reg) {
-			debug("%s: cannot find reg property in syscon node\n",
-			      __func__);
-			return -EINVAL;
-		}
-		priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
-							 offset, reg);
-		if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
-			debug("%s: Cannot find syscon base address\n",
-			      __func__);
-			return -EINVAL;
-		}
+	ret = clk_get_by_name(dev, "stmmaceth", &priv->tx_clk);
+	if (ret) {
+		dev_err(dev, "failed to get TX clock\n");
+		return ret;
+	}
+
+	ret = reset_get_by_name(dev, "stmmaceth", &priv->tx_rst);
+	if (ret && ret != -ENOENT) {
+		dev_err(dev, "failed to get TX reset\n");
+		return ret;
+	}
+
+	offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
+	if (offset < 0) {
+		debug("%s: cannot find syscon node\n", __func__);
+		return -EINVAL;
+	}
+
+	reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
+	if (!reg) {
+		debug("%s: cannot find reg property in syscon node\n",
+		      __func__);
+		return -EINVAL;
+	}
+	priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
+						 offset, reg);
+	if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
+		debug("%s: Cannot find syscon base address\n", __func__);
+		return -EINVAL;
 	}
 
 	pdata->phy_interface = -1;
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index 8dbd3c50c1..9a5f7fd3c7 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <linux/err.h>
 #include <malloc.h>
@@ -157,6 +158,7 @@ struct sunxi_sramc_regs {
 
 struct emac_eth_dev {
 	struct emac_regs *regs;
+	struct clk clk;
 	struct mii_dev *bus;
 	struct phy_device *phydev;
 	int link_printed;
@@ -500,14 +502,12 @@ static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet,
 	return 0;
 }
 
-static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
+static int sunxi_emac_board_setup(struct emac_eth_dev *priv)
 {
-	struct sunxi_ccm_reg *const ccm =
-		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct sunxi_sramc_regs *sram =
 		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
 	struct emac_regs *regs = priv->regs;
-	int pin;
+	int pin, ret;
 
 	/* Map SRAM to EMAC */
 	setbits_le32(&sram->ctrl1, 0x5 << 2);
@@ -517,10 +517,16 @@ static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
 		sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
 
 	/* Set up clock gating */
-	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
+	ret = clk_enable(&priv->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable emac clock\n");
+		return ret;
+	}
 
 	/* Set MII clock */
 	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
+
+	return 0;
 }
 
 static int sunxi_emac_eth_start(struct udevice *dev)
@@ -557,9 +563,19 @@ static int sunxi_emac_eth_probe(struct udevice *dev)
 {
 	struct eth_pdata *pdata = dev_get_platdata(dev);
 	struct emac_eth_dev *priv = dev_get_priv(dev);
+	int ret;
 
 	priv->regs = (struct emac_regs *)pdata->iobase;
-	sunxi_emac_board_setup(priv);
+
+	ret = clk_get_by_index(dev, 0, &priv->clk);
+	if (ret) {
+		dev_err(dev, "failed to get emac clock\n");
+		return ret;
+	}
+
+	ret = sunxi_emac_board_setup(priv);
+	if (ret)
+		return ret;
 
 	return sunxi_emac_init_phy(priv, dev);
 }