diff options
author | Anton Vorontsov <avorontsov@ru.mvista.com> | 2008-06-27 23:04:04 +0400 |
---|---|---|
committer | Scott Wood <scottwood@freescale.com> | 2008-09-12 14:56:03 -0500 |
commit | 97ae023648e764f794ffb9c52da109d6caf09c47 (patch) | |
tree | 87533cb3d34a8f13d11cd5fa7b31f95f9283cf84 /drivers/mtd/nand/fsl_elbc_nand.c | |
parent | 6644641d072aee3087da129d8443187196a4d8a9 (diff) |
fsl_elbc_nand: fix OOB workability for large page NAND chips
For large page chips, nand_bbt is looking into OOB area, and checking
for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
reserved for bbt means.
But ELBC driver is specifying ecclayout so that oobfree area starts at
offset 1, so only one byte left for the bbt purposes.
This causes problems with any OOB users, namely JFFS2: after first mount
JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
And on the next boot, NAND core will rescan for bad blocks, then will
see "0xff 0x19" pattern, and will mark all blocks as bad ones.
To fix the issue we should implement our own bad block pattern: just one
byte at OOB start. Though, this will work only for x8 chips. For x16
chips two bytes must be checked. Since ELBC driver does not support x16
NANDs (yet), we're safe for now.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'drivers/mtd/nand/fsl_elbc_nand.c')
-rw-r--r-- | drivers/mtd/nand/fsl_elbc_nand.c | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 674c542005c..b8bc143a8ce 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -122,6 +122,20 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = { .oobavail = 48, }; +/* + * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset + * 1, so we have to adjust bad block pattern. This pattern should be used for + * x8 chips only. So far hardware does not support x16 chips anyway. + */ +static u8 scan_ff_pattern[] = { 0xff, }; + +static struct nand_bbt_descr largepage_memorybased = { + .options = 0, + .offs = 0, + .len = 1, + .pattern = scan_ff_pattern, +}; + /*=================================*/ /* @@ -750,9 +764,10 @@ int board_nand_init(struct nand_chip *nand) priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT); - /* adjust Option Register and ECC to match Flash page size */ + /* Large-page-specific setup */ if (or & OR_FCM_PGS) { priv->page_size = 1; + nand->badblock_pattern = &largepage_memorybased; /* adjust ecc setup if needed */ if ((br & BR_DECC) == BR_DECC_CHK_GEN) { |