cfi: Add weak default function for flash_cmd_reset()

Currently the CFI driver issues both AMD and Intel reset commands.
This is because the driver doesn't know yet which chips are connected.
This dual reset seems to cause problems with the M29W128G chips as
reported by Richard Retanubun. This patch now introduces a weak default
function for the CFI reset command, still with both resets. This can
be overridden by a board specific version if necessary.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>

1 files changed, 18 insertions, 133 deletions

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 6eea49a11ea..24eb33f0f6e 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -39,6 +39,7 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <environment.h>
+#include <mtd/cfi_flash.h>
 
 /*
  * This file implements a Common Flash Interface (CFI) driver for
@@ -65,100 +66,6 @@
 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 #endif
 
-#define FLASH_CMD_CFI			0x98
-#define FLASH_CMD_READ_ID		0x90
-#define FLASH_CMD_RESET			0xff
-#define FLASH_CMD_BLOCK_ERASE		0x20
-#define FLASH_CMD_ERASE_CONFIRM		0xD0
-#define FLASH_CMD_WRITE			0x40
-#define FLASH_CMD_PROTECT		0x60
-#define FLASH_CMD_PROTECT_SET		0x01
-#define FLASH_CMD_PROTECT_CLEAR		0xD0
-#define FLASH_CMD_CLEAR_STATUS		0x50
-#define FLASH_CMD_READ_STATUS		0x70
-#define FLASH_CMD_WRITE_TO_BUFFER	0xE8
-#define FLASH_CMD_WRITE_BUFFER_PROG	0xE9
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM	0xD0
-
-#define FLASH_STATUS_DONE		0x80
-#define FLASH_STATUS_ESS		0x40
-#define FLASH_STATUS_ECLBS		0x20
-#define FLASH_STATUS_PSLBS		0x10
-#define FLASH_STATUS_VPENS		0x08
-#define FLASH_STATUS_PSS		0x04
-#define FLASH_STATUS_DPS		0x02
-#define FLASH_STATUS_R			0x01
-#define FLASH_STATUS_PROTECT		0x01
-
-#define AMD_CMD_RESET			0xF0
-#define AMD_CMD_WRITE			0xA0
-#define AMD_CMD_ERASE_START		0x80
-#define AMD_CMD_ERASE_SECTOR		0x30
-#define AMD_CMD_UNLOCK_START		0xAA
-#define AMD_CMD_UNLOCK_ACK		0x55
-#define AMD_CMD_WRITE_TO_BUFFER		0x25
-#define AMD_CMD_WRITE_BUFFER_CONFIRM	0x29
-
-#define AMD_STATUS_TOGGLE		0x40
-#define AMD_STATUS_ERROR		0x20
-
-#define ATM_CMD_UNLOCK_SECT		0x70
-#define ATM_CMD_SOFTLOCK_START		0x80
-#define ATM_CMD_LOCK_SECT		0x40
-
-#define FLASH_CONTINUATION_CODE		0x7F
-
-#define FLASH_OFFSET_MANUFACTURER_ID	0x00
-#define FLASH_OFFSET_DEVICE_ID		0x01
-#define FLASH_OFFSET_DEVICE_ID2		0x0E
-#define FLASH_OFFSET_DEVICE_ID3		0x0F
-#define FLASH_OFFSET_CFI		0x55
-#define FLASH_OFFSET_CFI_ALT		0x555
-#define FLASH_OFFSET_CFI_RESP		0x10
-#define FLASH_OFFSET_PRIMARY_VENDOR	0x13
-/* extended query table primary address */
-#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR	0x15
-#define FLASH_OFFSET_WTOUT		0x1F
-#define FLASH_OFFSET_WBTOUT		0x20
-#define FLASH_OFFSET_ETOUT		0x21
-#define FLASH_OFFSET_CETOUT		0x22
-#define FLASH_OFFSET_WMAX_TOUT		0x23
-#define FLASH_OFFSET_WBMAX_TOUT		0x24
-#define FLASH_OFFSET_EMAX_TOUT		0x25
-#define FLASH_OFFSET_CEMAX_TOUT		0x26
-#define FLASH_OFFSET_SIZE		0x27
-#define FLASH_OFFSET_INTERFACE		0x28
-#define FLASH_OFFSET_BUFFER_SIZE	0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
-#define FLASH_OFFSET_ERASE_REGIONS	0x2D
-#define FLASH_OFFSET_PROTECT		0x02
-#define FLASH_OFFSET_USER_PROTECTION	0x85
-#define FLASH_OFFSET_INTEL_PROTECTION	0x81
-
-#define CFI_CMDSET_NONE			0
-#define CFI_CMDSET_INTEL_EXTENDED	1
-#define CFI_CMDSET_AMD_STANDARD		2
-#define CFI_CMDSET_INTEL_STANDARD	3
-#define CFI_CMDSET_AMD_EXTENDED		4
-#define CFI_CMDSET_MITSU_STANDARD	256
-#define CFI_CMDSET_MITSU_EXTENDED	257
-#define CFI_CMDSET_SST			258
-#define CFI_CMDSET_INTEL_PROG_REGIONS	512
-
-#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
-# undef  FLASH_CMD_RESET
-# define FLASH_CMD_RESET	AMD_CMD_RESET /* use AMD-Reset instead */
-#endif
-
-typedef union {
-	unsigned char c;
-	unsigned short w;
-	unsigned long l;
-	unsigned long long ll;
-} cfiword_t;
-
-#define NUM_ERASE_REGIONS	4 /* max. number of erase regions */
-
 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
 static uint flash_verbose = 1;
 
@@ -178,38 +85,6 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
-/* CFI standard query structure */
-struct cfi_qry {
-	u8	qry[3];
-	u16	p_id;
-	u16	p_adr;
-	u16	a_id;
-	u16	a_adr;
-	u8	vcc_min;
-	u8	vcc_max;
-	u8	vpp_min;
-	u8	vpp_max;
-	u8	word_write_timeout_typ;
-	u8	buf_write_timeout_typ;
-	u8	block_erase_timeout_typ;
-	u8	chip_erase_timeout_typ;
-	u8	word_write_timeout_max;
-	u8	buf_write_timeout_max;
-	u8	block_erase_timeout_max;
-	u8	chip_erase_timeout_max;
-	u8	dev_size;
-	u16	interface_desc;
-	u16	max_buf_write_size;
-	u8	num_erase_regions;
-	u32	erase_region_info[NUM_ERASE_REGIONS];
-} __attribute__((packed));
-
-struct cfi_pri_hdr {
-	u8	pri[3];
-	u8	major_version;
-	u8	minor_version;
-} __attribute__((packed));
-
 static void __flash_write8(u8 value, void *addr)
 {
 	__raw_writeb(value, addr);
@@ -452,8 +327,8 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
 /*
  * Write a proper sized command to the correct address
  */
-static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
-			     uint offset, u32 cmd)
+void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+		      uint offset, u32 cmd)
 {
 
 	void *addr;
@@ -1699,15 +1574,25 @@ static void flash_read_cfi (flash_info_t *info, void *buf,
 		p[i] = flash_read_uchar(info, start + i);
 }
 
+void __flash_cmd_reset(flash_info_t *info)
+{
+	/*
+	 * We do not yet know what kind of commandset to use, so we issue
+	 * the reset command in both Intel and AMD variants, in the hope
+	 * that AMD flash roms ignore the Intel command.
+	 */
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+void flash_cmd_reset(flash_info_t *info)
+	__attribute__((weak,alias("__flash_cmd_reset")));
+
 static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
 {
 	int cfi_offset;
 
-	/* We do not yet know what kind of commandset to use, so we issue
-	   the reset command in both Intel and AMD variants, in the hope
-	   that AMD flash roms ignore the Intel command. */
-	flash_write_cmd (info, 0, 0, AMD_CMD_RESET);
-	flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+	/* Issue FLASH reset command */
+	flash_cmd_reset(info);
 
 	for (cfi_offset=0;
 	     cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);