mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT

If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio
& *printf functions are unavailable & calling them will cause a link
failure.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>

1 files changed, 36 insertions, 0 deletions

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 0b552f5850d..5550d46be9e 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -132,8 +132,10 @@ static int mmc_send_status(struct mmc *mmc, int timeout)
 			     MMC_STATE_PRG)
 				break;
 			else if (cmd.response[0] & MMC_STATUS_MASK) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 				printf("Status Error: 0x%08X\n",
 					cmd.response[0]);
+#endif
 				return COMM_ERR;
 			}
 		} else if (--retries < 0)
@@ -148,7 +150,9 @@ static int mmc_send_status(struct mmc *mmc, int timeout)
 	printf("CURR STATE:%d\n", status);
 #endif
 	if (timeout <= 0) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		printf("Timeout waiting card ready\n");
+#endif
 		return TIMEOUT;
 	}
 
@@ -178,7 +182,9 @@ struct mmc *find_mmc_device(int dev_num)
 			return m;
 	}
 
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 	printf("MMC Device %d not found\n", dev_num);
+#endif
 
 	return NULL;
 }
@@ -230,7 +236,9 @@ static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
 	return 0;
 
 err_out:
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 	puts("mmc erase failed\n");
+#endif
 	return err;
 }
 
@@ -245,6 +253,7 @@ mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
 	if (!mmc)
 		return -1;
 
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 	if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
 		printf("\n\nCaution! Your devices Erase group is 0x%x\n"
 		       "The erase range would be change to "
@@ -252,6 +261,7 @@ mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
 		       mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
 		       ((start + blkcnt + mmc->erase_grp_size)
 		       & ~(mmc->erase_grp_size - 1)) - 1);
+#endif
 
 	while (blk < blkcnt) {
 		blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
@@ -278,8 +288,10 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
 	int timeout = 1000;
 
 	if ((start + blkcnt) > mmc->block_dev.lba) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 			start + blkcnt, mmc->block_dev.lba);
+#endif
 		return 0;
 	}
 
@@ -303,7 +315,9 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
 	data.flags = MMC_DATA_WRITE;
 
 	if (mmc_send_cmd(mmc, &cmd, &data)) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		printf("mmc write failed\n");
+#endif
 		return 0;
 	}
 
@@ -315,7 +329,9 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
 		cmd.cmdarg = 0;
 		cmd.resp_type = MMC_RSP_R1b;
 		if (mmc_send_cmd(mmc, &cmd, NULL)) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 			printf("mmc fail to send stop cmd\n");
+#endif
 			return 0;
 		}
 	}
@@ -382,7 +398,9 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
 		cmd.cmdarg = 0;
 		cmd.resp_type = MMC_RSP_R1b;
 		if (mmc_send_cmd(mmc, &cmd, NULL)) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 			printf("mmc fail to send stop cmd\n");
+#endif
 			return 0;
 		}
 	}
@@ -402,8 +420,10 @@ static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst)
 		return 0;
 
 	if ((start + blkcnt) > mmc->block_dev.lba) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 			start + blkcnt, mmc->block_dev.lba);
+#endif
 		return 0;
 	}
 
@@ -1265,6 +1285,7 @@ static int mmc_startup(struct mmc *mmc)
 	mmc->block_dev.blksz = mmc->read_bl_len;
 	mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz);
 	mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 	sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
 		mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
 		(mmc->cid[3] >> 16) & 0xffff);
@@ -1274,6 +1295,11 @@ static int mmc_startup(struct mmc *mmc)
 		(mmc->cid[2] >> 24) & 0xff);
 	sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
 		(mmc->cid[2] >> 16) & 0xf);
+#else
+	mmc->block_dev.vendor[0] = 0;
+	mmc->block_dev.product[0] = 0;
+	mmc->block_dev.revision[0] = 0;
+#endif
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
 	init_part(&mmc->block_dev);
 #endif
@@ -1340,7 +1366,9 @@ int mmc_start_init(struct mmc *mmc)
 
 	if (mmc_getcd(mmc) == 0) {
 		mmc->has_init = 0;
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 		printf("MMC: no card present\n");
+#endif
 		return NO_CARD_ERR;
 	}
 
@@ -1375,7 +1403,9 @@ int mmc_start_init(struct mmc *mmc)
 		err = mmc_send_op_cond(mmc);
 
 		if (err && err != IN_PROGRESS) {
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 			printf("Card did not respond to voltage select!\n");
+#endif
 			return UNUSABLE_ERR;
 		}
 	}
@@ -1431,6 +1461,8 @@ static int __def_mmc_init(bd_t *bis)
 int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
 int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
 
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+
 void print_mmc_devices(char separator)
 {
 	struct mmc *m;
@@ -1448,6 +1480,10 @@ void print_mmc_devices(char separator)
 	printf("\n");
 }
 
+#else
+void print_mmc_devices(char separator) { }
+#endif
+
 int get_mmc_num(void)
 {
 	return cur_dev_num;