diff options
| author | Tero Kristo <t-kristo@ti.com> | 2020-02-14 11:18:16 +0200 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-03-03 13:08:14 +0530 |
| commit | 3b36b38f50cc3063f922db629f529b11ff92332b (patch) | |
| tree | 3f8d930b14950a9b753bb8c36832c4f3a43cb9aa /drivers/misc | |
| parent | 344eb6d572adfadb0a11196ef8cf6508f6c704df (diff) | |
misc: pmic_esm: Add support for PMIC ESM driver
The ESM (Error Signal Monitor) is used on certain PMIC versions to
handle error signals propagating from rest of the system. If these
reach the PMIC, it is typically a last resort fatal error which
requires a system reset. The ESM driver does the proper configuration
for the ESM module to reach this end goal. Initially, only TPS65941
PMIC is supported for this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/esm_pmic.c | 69 |
3 files changed, 77 insertions, 0 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 38588b2cbd..766402745d 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -486,4 +486,11 @@ config K3_AVS0 optimized voltage from the efuse, so that it can be programmed to the PMIC on board. +config ESM_PMIC + bool "Enable PMIC ESM driver" + depends on DM_PMIC + help + Support ESM (Error Signal Monitor) on PMIC devices. ESM is used + typically to reboot the board in error condition. + endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 60406c3e0a..68e0e7ad17 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -73,3 +73,4 @@ obj-$(CONFIG_JZ4780_EFUSE) += jz4780_efuse.o obj-$(CONFIG_MICROCHIP_FLEXCOM) += microchip_flexcom.o obj-$(CONFIG_K3_AVS0) += k3_avs.o obj-$(CONFIG_ESM_K3) += k3_esm.o +obj-$(CONFIG_ESM_PMIC) += esm_pmic.o diff --git a/drivers/misc/esm_pmic.c b/drivers/misc/esm_pmic.c new file mode 100644 index 0000000000..92c8d68f7c --- /dev/null +++ b/drivers/misc/esm_pmic.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PMIC Error Signal Monitor driver + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Tero Kristo <t-kristo@ti.com> + * + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <power/pmic.h> +#include <dm/device_compat.h> + +#define INT_ESM_REG 0x6c +#define INT_ESM_MASK 0x3f + +#define ESM_MCU_START_REG 0x8f + +#define ESM_MCU_START BIT(0) + +#define ESM_MCU_MODE_CFG_REG 0x92 + +#define ESM_MCU_EN BIT(6) +#define ESM_MCU_ENDRV BIT(5) + +/** + * pmic_esm_probe: configures and enables PMIC ESM functionality + * + * Configures ESM PMIC support and enables it. + */ +static int pmic_esm_probe(struct udevice *dev) +{ + int ret; + + ret = pmic_reg_write(dev->parent, INT_ESM_REG, INT_ESM_MASK); + if (ret) { + dev_err(dev, "clearing ESM irqs failed: %d\n", ret); + return ret; + } + + ret = pmic_reg_write(dev->parent, ESM_MCU_MODE_CFG_REG, + ESM_MCU_EN | ESM_MCU_ENDRV); + if (ret) { + dev_err(dev, "setting ESM mode failed: %d\n", ret); + return ret; + } + + ret = pmic_reg_write(dev->parent, ESM_MCU_START_REG, ESM_MCU_START); + if (ret) { + dev_err(dev, "starting ESM failed: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct udevice_id pmic_esm_ids[] = { + { .compatible = "ti,tps659413-esm" }, + {} +}; + +U_BOOT_DRIVER(pmic_esm) = { + .name = "esm_pmic", + .of_match = pmic_esm_ids, + .id = UCLASS_MISC, + .probe = pmic_esm_probe, +}; |