i2c: tegra: only use new clock/reset APIs

Now that the standard clock/reset APIs are available for all Tegra SoCs,
convert the I2C driver to use them exclusively, and remove any references
to the custom Tegra-specific APIs.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 11 insertions, 57 deletions

diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 0dbcc5a1cf..898f12a946 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -12,27 +12,15 @@
 #include <fdtdec.h>
 #include <i2c.h>
 #include <asm/io.h>
-#ifdef CONFIG_TEGRA186
 #include <clk.h>
 #include <reset.h>
-#else
+#ifndef CONFIG_TEGRA186
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/clk_rst.h>
 #endif
 #include <asm/arch/gpio.h>
 #include <asm/arch-tegra/tegra_i2c.h>
 
-/*
- * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that
- * should not be present. These are needed because newer Tegra SoCs support
- * only the standard clock/reset APIs, whereas older Tegra SoCs support only
- * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be
- * fixed to implement the standard APIs, and all drivers converted to solely
- * use the new standard APIs, with no ifdefs.
- */
-
 DECLARE_GLOBAL_DATA_PTR;
 
 enum i2c_type {
@@ -44,12 +32,8 @@ enum i2c_type {
 /* Information about i2c controller */
 struct i2c_bus {
 	int			id;
-#ifdef CONFIG_TEGRA186
 	struct reset_ctl	reset_ctl;
 	struct clk		clk;
-#else
-	enum periph_id		periph_id;
-#endif
 	int			speed;
 	int			pinmux_config;
 	struct i2c_control	*control;
@@ -81,20 +65,15 @@ static void set_packet_mode(struct i2c_bus *i2c_bus)
 static void i2c_reset_controller(struct i2c_bus *i2c_bus)
 {
 	/* Reset I2C controller. */
-#ifdef CONFIG_TEGRA186
 	reset_assert(&i2c_bus->reset_ctl);
 	udelay(1);
 	reset_deassert(&i2c_bus->reset_ctl);
 	udelay(1);
-#else
-	reset_periph(i2c_bus->periph_id, 1);
-#endif
 
 	/* re-program config register to packet mode */
 	set_packet_mode(i2c_bus);
 }
 
-#ifdef CONFIG_TEGRA186
 static int i2c_init_clock(struct i2c_bus *i2c_bus, unsigned rate)
 {
 	int ret;
@@ -114,7 +93,6 @@ static int i2c_init_clock(struct i2c_bus *i2c_bus, unsigned rate)
 
 	return 0;
 }
-#endif
 
 static void i2c_init_controller(struct i2c_bus *i2c_bus)
 {
@@ -126,12 +104,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
 	 * here, in section 23.3.1, but in fact we seem to need a factor of
 	 * 16 to get the right frequency.
 	 */
-#ifdef CONFIG_TEGRA186
 	i2c_init_clock(i2c_bus, i2c_bus->speed * 2 * 8);
-#else
-	clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
-		i2c_bus->speed * 2 * 8);
-#endif
 
 	if (i2c_bus->type == TYPE_114) {
 		/*
@@ -151,12 +124,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
 		debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
 			clk_div_stdfst_mode);
 
-#ifdef CONFIG_TEGRA186
 		i2c_init_clock(i2c_bus, rate);
-#else
-		clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
-				       rate);
-#endif
 	}
 
 	/* Reset I2C controller. */
@@ -170,7 +138,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
 	}
 
 #ifndef CONFIG_TEGRA186
-	funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config);
+	funcmux_select(i2c_bus->clk.id, i2c_bus->pinmux_config);
 #endif
 }
 
@@ -392,23 +360,13 @@ static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
 static int tegra_i2c_probe(struct udevice *dev)
 {
 	struct i2c_bus *i2c_bus = dev_get_priv(dev);
-#ifdef CONFIG_TEGRA186
 	int ret;
-#else
-	const void *blob = gd->fdt_blob;
-	int node = dev->of_offset;
-#endif
 	bool is_dvc;
 
 	i2c_bus->id = dev->seq;
 	i2c_bus->type = dev_get_driver_data(dev);
 	i2c_bus->regs = (struct i2c_ctlr *)dev_get_addr(dev);
 
-	/*
-	 * We don't have a binding for pinmux yet. Leave it out for now. So
-	 * far no one needs anything other than the default.
-	 */
-#ifdef CONFIG_TEGRA186
 	ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl);
 	if (ret) {
 		error("reset_get_by_name() failed: %d\n", ret);
@@ -419,9 +377,13 @@ static int tegra_i2c_probe(struct udevice *dev)
 		error("clk_get_by_name() failed: %d\n", ret);
 		return ret;
 	}
-#else
+
+#ifndef CONFIG_TEGRA186
+	/*
+	 * We don't have a binding for pinmux yet. Leave it out for now. So
+	 * far no one needs anything other than the default.
+	 */
 	i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
-	i2c_bus->periph_id = clock_decode_periph_id(blob, node);
 
 	/*
 	 * We can't specify the pinmux config in the fdt, so I2C2 will not
@@ -429,11 +391,9 @@ static int tegra_i2c_probe(struct udevice *dev)
 	 * You could add in this little hack if you need to use it.
 	 * The correct solution is a pinmux binding in the fdt.
 	 *
-	 *	if (i2c_bus->periph_id == PERIPH_ID_I2C2)
+	 *	if (i2c_bus->clk.id == PERIPH_ID_I2C2)
 	 *		i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
 	 */
-	if (i2c_bus->periph_id == -1)
-		return -EINVAL;
 #endif
 
 	is_dvc = dev_get_driver_data(dev) == TYPE_DVC;
@@ -444,14 +404,8 @@ static int tegra_i2c_probe(struct udevice *dev)
 		i2c_bus->control = &i2c_bus->regs->control;
 	}
 	i2c_init_controller(i2c_bus);
-	debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
-	      is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
-#ifndef CONFIG_TEGRA186
-	      i2c_bus->periph_id,
-#else
-	      -1,
-#endif
-	      i2c_bus->speed);
+	debug("%s: controller bus %d at %p, speed %d: ",
+	      is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs, i2c_bus->speed);
 
 	return 0;
 }