summaryrefslogtreecommitdiff
path: root/drivers/dma
diff options
context:
space:
mode:
authorMarek Vasut <marek.vasut@gmail.com>2011-11-23 10:59:13 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-06 23:59:40 +0100
commitaa72e43bb77353f8f33f4f5c7484a48084495e50 (patch)
tree51ddde2776cbe12d905b7fc91862a046a7179bf5 /drivers/dma
parent12dab4ce85a7dc2cb2e4d813696ed47ed44fb24e (diff)
MXS: Add static annotations to dma driver
Some functions were internal to the apbh dma driver, so annotate them static. Some of the functions weren't used at all so drop them. This makes the U-Boot binary smaller by about 1500 bytes. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/apbh_dma.c209
1 files changed, 50 insertions, 159 deletions
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 40009744835..e85f5fe6d21 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -53,6 +53,47 @@ int mxs_dma_validate_chan(int channel)
}
/*
+ * Return the address of the command within a descriptor.
+ */
+static unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
+{
+ return desc->address + offsetof(struct mxs_dma_desc, cmd);
+}
+
+/*
+ * Read a DMA channel's hardware semaphore.
+ *
+ * As used by the MXS platform's DMA software, the DMA channel's hardware
+ * semaphore reflects the number of DMA commands the hardware will process, but
+ * has not yet finished. This is a volatile value read directly from hardware,
+ * so it must be be viewed as immediately stale.
+ *
+ * If the channel is not marked busy, or has finished processing all its
+ * commands, this value should be zero.
+ *
+ * See mxs_dma_append() for details on how DMA command blocks must be configured
+ * to maintain the expected behavior of the semaphore's value.
+ */
+static int mxs_dma_read_semaphore(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
+
+ tmp &= APBH_CHn_SEMA_PHORE_MASK;
+ tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
+
+ return tmp;
+}
+
+/*
* Enable a DMA channel.
*
* If the given channel has any DMA descriptors on its active list, this
@@ -61,7 +102,7 @@ int mxs_dma_validate_chan(int channel)
* This function marks the DMA channel as "busy," whether or not there are any
* descriptors to process.
*/
-int mxs_dma_enable(int channel)
+static int mxs_dma_enable(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
@@ -132,7 +173,7 @@ int mxs_dma_enable(int channel)
* state. It is unwise to call this function if there is ANY chance the hardware
* is still processing a command.
*/
-int mxs_dma_disable(int channel)
+static int mxs_dma_disable(int channel)
{
struct mxs_dma_chan *pchan;
struct mx28_apbh_regs *apbh_regs =
@@ -162,7 +203,7 @@ int mxs_dma_disable(int channel)
/*
* Resets the DMA channel hardware.
*/
-int mxs_dma_reset(int channel)
+static int mxs_dma_reset(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
@@ -179,90 +220,11 @@ int mxs_dma_reset(int channel)
}
/*
- * Freeze a DMA channel.
- *
- * This function causes the channel to continuously fail arbitration for bus
- * access, which halts all forward progress without losing any state. A call to
- * mxs_dma_unfreeze() will cause the channel to continue its current operation
- * with no ill effect.
- */
-int mxs_dma_freeze(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
- &apbh_regs->hw_apbh_channel_ctrl_set);
-
- return 0;
-}
-
-/*
- * Unfreeze a DMA channel.
- *
- * This function reverses the effect of mxs_dma_freeze(), enabling the DMA
- * channel to continue from where it was frozen.
- */
-int mxs_dma_unfreeze(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
- &apbh_regs->hw_apbh_channel_ctrl_clr);
-
- return 0;
-}
-
-/*
- * Read a DMA channel's hardware semaphore.
- *
- * As used by the MXS platform's DMA software, the DMA channel's hardware
- * semaphore reflects the number of DMA commands the hardware will process, but
- * has not yet finished. This is a volatile value read directly from hardware,
- * so it must be be viewed as immediately stale.
- *
- * If the channel is not marked busy, or has finished processing all its
- * commands, this value should be zero.
- *
- * See mxs_dma_append() for details on how DMA command blocks must be configured
- * to maintain the expected behavior of the semaphore's value.
- */
-int mxs_dma_read_semaphore(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- uint32_t tmp;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
-
- tmp &= APBH_CHn_SEMA_PHORE_MASK;
- tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
-
- return tmp;
-}
-
-/*
* Enable or disable DMA interrupt.
*
* This function enables the given DMA channel to interrupt the CPU.
*/
-int mxs_dma_enable_irq(int channel, int enable)
+static int mxs_dma_enable_irq(int channel, int enable)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
@@ -283,32 +245,12 @@ int mxs_dma_enable_irq(int channel, int enable)
}
/*
- * Check if a DMA interrupt is pending.
- */
-int mxs_dma_irq_is_pending(int channel)
-{
- struct mx28_apbh_regs *apbh_regs =
- (struct mx28_apbh_regs *)MXS_APBH_BASE;
- uint32_t tmp;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- tmp = readl(&apbh_regs->hw_apbh_ctrl1);
- tmp |= readl(&apbh_regs->hw_apbh_ctrl2);
-
- return (tmp >> channel) & 1;
-}
-
-/*
* Clear DMA interrupt.
*
* The software that is using the DMA channel must register to receive its
* interrupts and, when they arrive, must call this function to clear them.
*/
-int mxs_dma_ack_irq(int channel)
+static int mxs_dma_ack_irq(int channel)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;
@@ -327,7 +269,7 @@ int mxs_dma_ack_irq(int channel)
/*
* Request to reserve a DMA channel
*/
-int mxs_dma_request(int channel)
+static int mxs_dma_request(int channel)
{
struct mxs_dma_chan *pchan;
@@ -359,7 +301,7 @@ int mxs_dma_request(int channel)
* The channel will NOT be released if it's marked "busy" (see
* mxs_dma_enable()).
*/
-int mxs_dma_release(int channel)
+static int mxs_dma_release(int channel)
{
struct mxs_dma_chan *pchan;
int ret;
@@ -411,32 +353,6 @@ void mxs_dma_desc_free(struct mxs_dma_desc *pdesc)
}
/*
- * Return the address of the command within a descriptor.
- */
-unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
-{
- return desc->address + offsetof(struct mxs_dma_desc, cmd);
-}
-
-/*
- * Check if descriptor is on a channel's active list.
- *
- * This function returns the state of a descriptor's "ready" flag. This flag is
- * usually set only if the descriptor appears on a channel's active list. The
- * descriptor may or may not have already been processed by the hardware.
- *
- * The "ready" flag is set when the descriptor is submitted to a channel by a
- * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is
- * cleared when a processed descriptor is moved off the active list by a call
- * to mxs_dma_finish(). The "ready" flag is NOT cleared if the descriptor is
- * aborted by a call to mxs_dma_disable().
- */
-int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc)
-{
- return pdesc->flags & MXS_DMA_DESC_READY;
-}
-
-/*
* Add a DMA descriptor to a channel.
*
* If the descriptor list for this channel is not empty, this function sets the
@@ -509,31 +425,6 @@ int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc)
}
/*
- * Retrieve processed DMA descriptors.
- *
- * This function moves all the descriptors from the DMA channel's "done" list to
- * the head of the given list.
- */
-int mxs_dma_get_finished(int channel, struct list_head *head)
-{
- struct mxs_dma_chan *pchan;
- int ret;
-
- ret = mxs_dma_validate_chan(channel);
- if (ret)
- return ret;
-
- if (head == NULL)
- return 0;
-
- pchan = mxs_dma_channels + channel;
-
- list_splice(&pchan->done, head);
-
- return 0;
-}
-
-/*
* Clean up processed DMA descriptors.
*
* This function removes processed DMA descriptors from the "active" list. Pass
@@ -544,7 +435,7 @@ int mxs_dma_get_finished(int channel, struct list_head *head)
* This function marks the DMA channel as "not busy" if no unprocessed
* descriptors remain on the "active" list.
*/
-int mxs_dma_finish(int channel, struct list_head *head)
+static int mxs_dma_finish(int channel, struct list_head *head)
{
int sem;
struct mxs_dma_chan *pchan;
@@ -590,7 +481,7 @@ int mxs_dma_finish(int channel, struct list_head *head)
/*
* Wait for DMA channel to complete
*/
-int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
+static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
{
struct mx28_apbh_regs *apbh_regs =
(struct mx28_apbh_regs *)MXS_APBH_BASE;