adc: Add driver for STM32 ADC

This patch adds support for STMicroelectronics STM32 ADC (analog to
digital converter). It's originally based on Linux kernel v4.18-rcs
drivers/iio/adc/stm32-adc*. It's composed of:
- core driver (UCLASS_SIMPLE_BUS) manages common resources (clk, regu).
- child drivers (UCLASS_ADC) declare each ADC, channels and handle
  conversions.
This driver currently supports STM32H7 and STM32MP1 ADC.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 209 insertions, 0 deletions

diff --git a/drivers/adc/stm32-adc-core.c b/drivers/adc/stm32-adc-core.c
new file mode 100644
index 0000000000..a9aa143bfe
--- /dev/null
+++ b/drivers/adc/stm32-adc-core.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
+ *
+ * Originally based on the Linux kernel v4.18 drivers/iio/adc/stm32-adc-core.c.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <power/regulator.h>
+#include "stm32-adc-core.h"
+
+/* STM32H7 - common registers for all ADC instances */
+#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
+
+/* STM32H7_ADC_CCR - bit fields */
+#define STM32H7_PRESC_SHIFT		18
+#define STM32H7_PRESC_MASK		GENMASK(21, 18)
+#define STM32H7_CKMODE_SHIFT		16
+#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
+
+/* STM32 H7 maximum analog clock rate (from datasheet) */
+#define STM32H7_ADC_MAX_CLK_RATE	36000000
+
+/**
+ * struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock
+ * @ckmode: ADC clock mode, Async or sync with prescaler.
+ * @presc: prescaler bitfield for async clock mode
+ * @div: prescaler division ratio
+ */
+struct stm32h7_adc_ck_spec {
+	u32 ckmode;
+	u32 presc;
+	int div;
+};
+
+static const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = {
+	/* 00: CK_ADC[1..3]: Asynchronous clock modes */
+	{ 0, 0, 1 },
+	{ 0, 1, 2 },
+	{ 0, 2, 4 },
+	{ 0, 3, 6 },
+	{ 0, 4, 8 },
+	{ 0, 5, 10 },
+	{ 0, 6, 12 },
+	{ 0, 7, 16 },
+	{ 0, 8, 32 },
+	{ 0, 9, 64 },
+	{ 0, 10, 128 },
+	{ 0, 11, 256 },
+	/* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */
+	{ 1, 0, 1 },
+	{ 2, 0, 2 },
+	{ 3, 0, 4 },
+};
+
+static int stm32h7_adc_clk_sel(struct udevice *dev,
+			       struct stm32_adc_common *common)
+{
+	u32 ckmode, presc;
+	unsigned long rate;
+	int i, div;
+
+	/* stm32h7 bus clock is common for all ADC instances (mandatory) */
+	if (!clk_valid(&common->bclk)) {
+		dev_err(dev, "No bclk clock found\n");
+		return -ENOENT;
+	}
+
+	/*
+	 * stm32h7 can use either 'bus' or 'adc' clock for analog circuitry.
+	 * So, choice is to have bus clock mandatory and adc clock optional.
+	 * If optional 'adc' clock has been found, then try to use it first.
+	 */
+	if (clk_valid(&common->aclk)) {
+		/*
+		 * Asynchronous clock modes (e.g. ckmode == 0)
+		 * From spec: PLL output musn't exceed max rate
+		 */
+		rate = clk_get_rate(&common->aclk);
+		if (!rate) {
+			dev_err(dev, "Invalid aclk rate: 0\n");
+			return -EINVAL;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
+			ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
+			presc = stm32h7_adc_ckmodes_spec[i].presc;
+			div = stm32h7_adc_ckmodes_spec[i].div;
+
+			if (ckmode)
+				continue;
+
+			if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+				goto out;
+		}
+	}
+
+	/* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */
+	rate = clk_get_rate(&common->bclk);
+	if (!rate) {
+		dev_err(dev, "Invalid bus clock rate: 0\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) {
+		ckmode = stm32h7_adc_ckmodes_spec[i].ckmode;
+		presc = stm32h7_adc_ckmodes_spec[i].presc;
+		div = stm32h7_adc_ckmodes_spec[i].div;
+
+		if (!ckmode)
+			continue;
+
+		if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE)
+			goto out;
+	}
+
+	dev_err(dev, "clk selection failed\n");
+	return -EINVAL;
+
+out:
+	/* rate used later by each ADC instance to control BOOST mode */
+	common->rate = rate / div;
+
+	/* Set common clock mode and prescaler */
+	clrsetbits_le32(common->base + STM32H7_ADC_CCR,
+			STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK,
+			ckmode << STM32H7_CKMODE_SHIFT |
+			presc << STM32H7_PRESC_SHIFT);
+
+	dev_dbg(dev, "Using %s clock/%d source at %ld kHz\n",
+		ckmode ? "bus" : "adc", div, common->rate / 1000);
+
+	return 0;
+}
+
+static int stm32_adc_core_probe(struct udevice *dev)
+{
+	struct stm32_adc_common *common = dev_get_priv(dev);
+	int ret;
+
+	common->base = dev_read_addr_ptr(dev);
+	if (!common->base) {
+		dev_err(dev, "can't get address\n");
+		return -ENOENT;
+	}
+
+	ret = device_get_supply_regulator(dev, "vref-supply", &common->vref);
+	if (ret) {
+		dev_err(dev, "can't get vref-supply: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_get_value(common->vref);
+	if (ret < 0) {
+		dev_err(dev, "can't get vref-supply value: %d\n", ret);
+		return ret;
+	}
+	common->vref_uv = ret;
+
+	ret = clk_get_by_name(dev, "adc", &common->aclk);
+	if (!ret) {
+		ret = clk_enable(&common->aclk);
+		if (ret) {
+			dev_err(dev, "Can't enable aclk: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = clk_get_by_name(dev, "bus", &common->bclk);
+	if (!ret) {
+		ret = clk_enable(&common->bclk);
+		if (ret) {
+			dev_err(dev, "Can't enable bclk: %d\n", ret);
+			goto err_aclk_disable;
+		}
+	}
+
+	ret = stm32h7_adc_clk_sel(dev, common);
+	if (ret)
+		goto err_bclk_disable;
+
+	return ret;
+
+err_bclk_disable:
+	if (clk_valid(&common->bclk))
+		clk_disable(&common->bclk);
+
+err_aclk_disable:
+	if (clk_valid(&common->aclk))
+		clk_disable(&common->aclk);
+
+	return ret;
+}
+
+static const struct udevice_id stm32_adc_core_ids[] = {
+	{ .compatible = "st,stm32h7-adc-core" },
+	{ .compatible = "st,stm32mp1-adc-core" },
+	{}
+};
+
+U_BOOT_DRIVER(stm32_adc_core) = {
+	.name  = "stm32-adc-core",
+	.id = UCLASS_SIMPLE_BUS,
+	.of_match = stm32_adc_core_ids,
+	.probe = stm32_adc_core_probe,
+	.priv_auto_alloc_size = sizeof(struct stm32_adc_common),
+};