summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorDomen Puncer <domen.puncer@telargo.com>2007-04-18 12:11:05 +0200
committerStefan Roese <sr@denx.de>2007-04-18 12:11:05 +0200
commit3747a3f010b2b1442dec3e871c69788b6017aaae (patch)
tree9f3da96699c671c46e0a37c725f13a5d5782a864 /doc
parente673226ff9d6aa91b47ceac74b8c13770b06bb37 (diff)
[PATCH] icecube/lite5200b: document wakeup from low-power support
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.Lite5200B_low_power22
1 files changed, 22 insertions, 0 deletions
diff --git a/doc/README.Lite5200B_low_power b/doc/README.Lite5200B_low_power
new file mode 100644
index 00000000000..5b04fbba72a
--- /dev/null
+++ b/doc/README.Lite5200B_low_power
@@ -0,0 +1,22 @@
+Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
+----------------------------------------------------------
+
+Low-power mode as described in Lite5200B User's Manual, means that
+with support of MC68HLC908QT1 microcontroller (refered to as QT),
+everything but the SDRAM can be powered down. This brings
+maximum power saving, while one can still restore previous state
+quickly.
+
+Quick overview where U-Boot comes into the picture:
+- OS saves device states
+- OS saves wakeup handler address to physical 0x0, puts SDRAM into
+ self-refresh and signals to QT, it should power down the board
+- / board is sleeping here /
+- someone presses SW4 (connected to QT)
+- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
+ so get SDRAM out of self-refresh and transfer control to OS
+ wakeup handler
+- OS restores device states
+
+This was tested on Linux with USB and Ethernet in use. Adding
+support for other devices is an OS issue.