summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorThomas Weber <thomas@tomweber.eu>2012-03-24 22:44:01 +0000
committerAnatolij Gustschin <agust@denx.de>2012-03-27 13:31:37 +0200
commitc46bf09e0b567dda477da53163fe646e66c4912e (patch)
tree7d2da19b2e7242e0d31ed56d8f3e1bce0fb5d44e /doc
parent7e71dc68846647f387a74d50924da1218e197089 (diff)
doc: Fix some typos in different files
adresses/addresses alernate/alternate asssuming/assuming calcualted/calculated enviroment/environment evalutation/evaluation falsh/flash labled/labeled paramaters/parameters Signed-off-by: Thomas Weber <thomas@tomweber.eu> Acked-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.AVR32-port-muxing4
-rw-r--r--doc/README.SNTP2
-rw-r--r--doc/README.Sandpoint82406
-rw-r--r--doc/README.at916
-rw-r--r--doc/README.ebony2
-rw-r--r--doc/README.fsl-ddr4
-rw-r--r--doc/README.mpc832xemds2
-rw-r--r--doc/README.mpc8360emds2
-rw-r--r--doc/README.mpc837xemds2
-rw-r--r--doc/README.mpc8544ds2
-rw-r--r--doc/README.mpc8572ds4
-rw-r--r--doc/README.mpc85xxads2
-rw-r--r--doc/README.mvbc_p2
-rw-r--r--doc/README.mvblm74
-rw-r--r--doc/README.mvsmr2
-rw-r--r--doc/README.ocotea2
-rw-r--r--doc/README.p2020rdb4
17 files changed, 26 insertions, 26 deletions
diff --git a/doc/README.AVR32-port-muxing b/doc/README.AVR32-port-muxing
index b53799d3381..8c1718cdca1 100644
--- a/doc/README.AVR32-port-muxing
+++ b/doc/README.AVR32-port-muxing
@@ -91,7 +91,7 @@ of the flags are the same on all implementations.
PORTMUX_DIR_OUTPUT
PORTMUX_DIR_INPUT
-These mutually-exlusive flags configure the initial direction of the
+These mutually-exclusive flags configure the initial direction of the
pins. PORTMUX_DIR_OUTPUT means that the pins are driven by the CPU,
while PORTMUX_DIR_INPUT means that the pins are tristated by the CPU.
These flags are ignored by portmux_select_peripheral().
@@ -125,7 +125,7 @@ PORTMUX_PULL_UP.
PORTMUX_DRIVE_HIGH
PORTMUX_DRIVE_MAX
-These mutually-exlusive flags determine the drive strength of the
+These mutually-exclusive flags determine the drive strength of the
pins. PORTMUX_DRIVE_MIN will give low power-consumption, but may cause
corruption of high-speed signals. PORTMUX_DRIVE_MAX will give high
power-consumption, but may be necessary on pins toggling at very high
diff --git a/doc/README.SNTP b/doc/README.SNTP
index 9edc957c6f1..da9ec459ad4 100644
--- a/doc/README.SNTP
+++ b/doc/README.SNTP
@@ -6,7 +6,7 @@ syncronize RTC of the board. This command needs the command line
parameter of server's IP address or environment variable
"ntpserverip". The network time is sent as UTC. So if you want to
set local time to RTC, set the offset in second from UTC to the
-enviroment variable "time offset".
+environment variable "time offset".
If the DHCP server provides time server's IP or time offset, you
don't need to set the above environment variables yourself.
diff --git a/doc/README.Sandpoint8240 b/doc/README.Sandpoint8240
index a41b69acedb..fa846dc33e1 100644
--- a/doc/README.Sandpoint8240
+++ b/doc/README.Sandpoint8240
@@ -236,7 +236,7 @@ PART 10)
=> setenv serverip 192.168.0.10
=> setenv gatewayip=192.168.0.1
=> saveenv
-Saving Enviroment to Flash...
+Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
done
@@ -296,7 +296,7 @@ Erase Flash Bank # 2 - missing
=> cp.b 0x100000 FFF00000 1f28c
Copy to Flash... done
=> saveenv
-Saving Enviroment to Flash...
+Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
done
@@ -330,7 +330,7 @@ Erase Flash from 0xfff00000 to 0xfff3ffff
done
Erased 7 sectors
Copy to Flash... done
-Saving Enviroment to Flash...
+Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
done
diff --git a/doc/README.at91 b/doc/README.at91
index 84b5595a92b..b51df00da70 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -62,16 +62,16 @@ Environment variables
U-Boot environment variables can be stored at different places:
- Dataflash on SPI chip select 0 (dataflash card)
- Nand flash.
- - Nor falsh (not populate by default)
+ - Nor flash (not populate by default)
You can choose your storage location at config step (here for at91sam9260ek) :
make at91sam9263ek_config - use data flash (spi cs0) (default)
make at91sam9263ek_nandflash_config - use nand flash
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
- make at91sam9263ek_norflash_config - use nor falsh
+ make at91sam9263ek_norflash_config - use nor flash
You can choose to boot directly from U-Boot at config step
- make at91sam9263ek_norflash_boot_config - boot from nor falsh
+ make at91sam9263ek_norflash_boot_config - boot from nor flash
------------------------------------------------------------------------------
diff --git a/doc/README.ebony b/doc/README.ebony
index a8479a4799d..4df00b35612 100644
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -4,7 +4,7 @@
=======================================================================
This file contains some handy info regarding U-Boot and the AMCC
-Ebony evalutation board. See the README.ppc440 for additional
+Ebony evaluation board. See the README.ppc440 for additional
information.
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index 1d50153d58c..5e216587659 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -250,7 +250,7 @@ print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
c<n> - the controller number, eg. c0, c1
d<n> - the DIMM number, eg. d0, d1
spd - print SPD data
- dimmparms - DIMM paramaters, calcualted from SPD
+ dimmparms - DIMM parameters, calculated from SPD
commonparms - lowest common parameters for all DIMMs
opts - options
addresses - address assignment (not implemented yet)
@@ -260,7 +260,7 @@ edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
c<n> - the controller number, eg. c0, c1
d<n> - the DIMM number, eg. d0, d1
spd - print SPD data
- dimmparms - DIMM paramaters, calcualted from SPD
+ dimmparms - DIMM parameters, calculated from SPD
commonparms - lowest common parameters for all DIMMs
opts - options
addresses - address assignment (not implemented yet)
diff --git a/doc/README.mpc832xemds b/doc/README.mpc832xemds
index 688bdbb201b..4142aa9c8d5 100644
--- a/doc/README.mpc832xemds
+++ b/doc/README.mpc832xemds
@@ -15,7 +15,7 @@ Freescale MPC832XEMDS Board
"On" == 0
SW3 is switch 18 as silk-screened onto the board.
- SW4[8] is the bit labled 8 on Switch 4.
+ SW4[8] is the bit labeled 8 on Switch 4.
SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index 2b39160418d..6afa7539690 100644
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -15,7 +15,7 @@ Freescale MPC8360EMDS Board
"On" == 0
SW18 is switch 18 as silk-screened onto the board.
- SW4[8] is the bit labled 8 on Switch 4.
+ SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds
index aa767ae7d84..faf21c9ffb6 100644
--- a/doc/README.mpc837xemds
+++ b/doc/README.mpc837xemds
@@ -14,7 +14,7 @@ Freescale MPC837xEMDS Board
"Off" == 1
"On" == 0
- SW4[8] is the bit labled 8 on Switch 4.
+ SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
and bits labeled 8 is set as "Off".
diff --git a/doc/README.mpc8544ds b/doc/README.mpc8544ds
index bf257a0054f..b49c3c07c40 100644
--- a/doc/README.mpc8544ds
+++ b/doc/README.mpc8544ds
@@ -22,7 +22,7 @@ boot bank at 0xfff8_0000.
Memory Map
----------
-0xff80_0000 - 0xffbf_ffff Alernate bank 4MB
+0xff80_0000 - 0xffbf_ffff Alternate bank 4MB
0xffc0_0000 - 0xffff_ffff Boot bank 4MB
0xffb8_0000 Alternate image start 512KB
diff --git a/doc/README.mpc8572ds b/doc/README.mpc8572ds
index 06dab596bea..57fd2ad6160 100644
--- a/doc/README.mpc8572ds
+++ b/doc/README.mpc8572ds
@@ -19,7 +19,7 @@ Booting is always from the boot bank at 0xec00_0000.
Memory Map
----------
-0xe800_0000 - 0xebff_ffff Alernate bank 64MB
+0xe800_0000 - 0xebff_ffff Alternate bank 64MB
0xec00_0000 - 0xefff_ffff Boot bank 64MB
0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB
@@ -115,7 +115,7 @@ Implementing AMP(Asymmetric MultiProcessing)
- Select "Advanced setup" -> " Prompt for advanced kernel
configuration options"
- Select "Set physical address where the kernel is loaded" and
- set it to 0x20000000, asssuming core1 will start from 512MB.
+ set it to 0x20000000, assuming core1 will start from 512MB.
- Select "Set custom page offset address"
- Select "Set custom kernel base address"
- Select "Set maximum low memory"
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index d059a979817..28bbcbe095d 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -35,7 +35,7 @@ Updated 13-July-2004 Jon Loeliger
"On" == 0
SW18 is switch 18 as silk-screened onto the board.
- SW4[8] is the bit labled 8 on Switch 4.
+ SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2
SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3
diff --git a/doc/README.mvbc_p b/doc/README.mvbc_p
index e3fcb4eb1bc..a691137550e 100644
--- a/doc/README.mvbc_p
+++ b/doc/README.mvbc_p
@@ -33,7 +33,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P)
2.4 I2C
LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for vendor specifics.
- image sensor interface (slave adresses depend on sensor)
+ image sensor interface (slave addresses depend on sensor)
3 Flash layout.
diff --git a/doc/README.mvblm7 b/doc/README.mvblm7
index 3ee9396540b..a0686f7fa57 100644
--- a/doc/README.mvblm7
+++ b/doc/README.mvblm7
@@ -40,10 +40,10 @@ Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
MAX5381 DAC @ 0x60 for 1st digital input threshold.
LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
- 1st image sensor interface (slave adresses depend on sensor)
+ 1st image sensor interface (slave addresses depend on sensor)
Bus2:
MAX5381 DAC @ 0x60 for 2nd digital input threshold.
- 2nd image sensor interface (slave adresses depend on sensor)
+ 2nd image sensor interface (slave addresses depend on sensor)
3 Flash layout.
diff --git a/doc/README.mvsmr b/doc/README.mvsmr
index d729ea6fbe3..8e34cb78385 100644
--- a/doc/README.mvsmr
+++ b/doc/README.mvsmr
@@ -23,7 +23,7 @@ Matrix Vision mvSMR
2.4 I2C
EEPROM @ 0xA0 for vendor specifics.
- image sensor interface (slave adresses depend on sensor)
+ image sensor interface (slave addresses depend on sensor)
3 Flash layout.
diff --git a/doc/README.ocotea b/doc/README.ocotea
index 9ac3a184cb8..be79b03c8a0 100644
--- a/doc/README.ocotea
+++ b/doc/README.ocotea
@@ -4,7 +4,7 @@
=======================================================================
This file contains some handy info regarding U-Boot and the AMCC
-Ocotea 440gx evalutation board. See the README.ppc440 for additional
+Ocotea 440gx evaluation board. See the README.ppc440 for additional
information.
diff --git a/doc/README.p2020rdb b/doc/README.p2020rdb
index 8a2302fa99d..cb664a5bd7d 100644
--- a/doc/README.p2020rdb
+++ b/doc/README.p2020rdb
@@ -17,7 +17,7 @@ Booting by default is always from the boot bank at 0xef00_0000.
Memory Map
----------
-0xef00_0000 - 0xef7f_ffff Alernate bank 8MB
+0xef00_0000 - 0xef7f_ffff Alternate bank 8MB
0xe800_0000 - 0xefff_ffff Boot bank 8MB
0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB
@@ -89,7 +89,7 @@ Implementing AMP(Asymmetric MultiProcessing)
"Prompt for advanced kernel configuration options"
- Select
"Set physical address where the kernel is loaded"
- and set it to 0x20000000, asssuming core1 will
+ and set it to 0x20000000, assuming core1 will
start from 512MB.
- Select "Set custom page offset address"
- Select "Set custom kernel base address"