summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorJon Loeliger <jdl@freescale.com>2005-07-25 14:05:07 -0500
committerJon Loeliger <jdl@freescale.com>2005-07-25 14:05:07 -0500
commitd9b94f28a442b0013caef99de084d7b72e2d4607 (patch)
tree1b293a551e021a4a696717231ec03206d9f172de /doc
parent288693abe1f7c23e69479fd85c2c0d8d7fdbf8f2 (diff)
* Patch by Jon Loeliger, 2005-05-05
Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
Diffstat (limited to 'doc')
-rw-r--r--doc/README.mpc85xxads9
-rw-r--r--doc/README.mpc85xxcds43
2 files changed, 46 insertions, 6 deletions
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index c488f2a56bf..08d6831fb62 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -143,6 +143,7 @@ Updated 13-July-2004 Jon Loeliger
CONFIG_DDR_ECC only for ECC DDR module
CONFIG_DDR_DLL DLL fix on some ADS boards needed for more
stability.
+ CONFIG_HAS_FEC If an FEC is on chip, set to 1, else 0.
Other than the above definitions, the rest in the config files are
straightforward.
@@ -190,10 +191,10 @@ straightforward.
4.4 Reflash U-boot Image using U-boot
- => tftp 10000 u-boot.bin
- => protect off fff80000 ffffffff
- => erase fff80000 ffffffff
- => cp.b 10000 fff80000 80000
+ tftp 10000 u-boot.bin
+ protect off fff80000 ffffffff
+ erase fff80000 ffffffff
+ cp.b 10000 fff80000 80000
4.5 Reflash U-Boot with a BDI-2000
diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds
index e0f49163ed1..bc5db0ca8ef 100644
--- a/doc/README.mpc85xxcds
+++ b/doc/README.mpc85xxcds
@@ -135,8 +135,8 @@ The default setting of all switches on the carrier board is:
SW4=10001000
-CPU Card Switches
------------------
+8555/41 CPU Card Switches
+-------------------------
Most switches on the CPU Card should not be changed. However, the
frequency can be changed by setting SW3:
@@ -160,6 +160,45 @@ A safe default setting for all switches on the CPU board is:
SW4=11111110
+8548 CPU Card Switches
+----------------------
+And, just to be confusing, in this set of switches:
+
+ ON = 1
+ OFF = 0
+
+Default
+ SW1=11111101
+ SW2=10011111
+ SW3=11001000 (8X) (2:1)
+ SW4=11110011
+
+ SW3=X000XXXX == CORE:CCB 4:1
+ X001XXXX == CORE:CCB 9:2
+ X010XXXX == CORE:CCB 1:1
+ X011XXXX == CORE:CCB 3:2
+ X100XXXX == CORE:CCB 2:1
+ X101XXXX == CORE:CCB 5:2
+ X110XXXX == CORE:CCB 3:1
+ X111XXXX == CORE:CCB 7:2
+ XXXX0000 == CCB:SYSCLK 16:1
+ XXXX0001 == RESERVED
+ XXXX0010 == CCB:SYSCLK 2:1
+ XXXX0011 == CCB:SYSCLK 3:1
+ XXXX0100 == CCB:SYSCLK 4:1
+ XXXX0101 == CCB:SYSCLK 5:1
+ XXXX0110 == CCB:SYSCLK 6:1
+ XXXX0111 == RESERVED
+ XXXX1000 == CCB:SYSCLK 8:1
+ XXXX1001 == CCB:SYSCLK 9:1
+ XXXX1010 == CCB:SYSCLK 10:1
+ XXXX1011 == RESERVED
+ XXXX1100 == CCB:SYSCLK 12:1
+ XXXX1101 == CCB:SYSCLK 20:1
+ XXXX1110 == RESERVED
+ XXXX1111 == RESERVED
+
+
eDINK Info
----------