diff options
| author | Stefano Babic <sbabic@denx.de> | 2012-12-08 12:02:45 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2012-12-08 12:02:45 +0100 |
| commit | 05a860c228fe6c8f2e7aced8cc8ef88bc1038363 (patch) | |
| tree | 764536da9202b9de387a0d957829f64dfba818b7 /doc | |
| parent | 393ff47ba3123208f7c4f08d63f114300a41d0c4 (diff) | |
| parent | fd4d564b3c80b111f18c93adb14233a6a7ddb0e9 (diff) | |
Merge branch 'master' of git://git.denx.de/u-boot into master
Conflicts:
drivers/power/power_fsl.c
include/configs/mx35pdk.h
include/configs/mx53loco.h
include/configs/woodburn_common.h
board/woodburn/woodburn.c
These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.
Fix all conflicts and update woodburn to use Power Framework.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/DocBook/Makefile | 2 | ||||
| -rw-r--r-- | doc/README.mpc85xx | 2 | ||||
| -rw-r--r-- | doc/README.nand | 21 | ||||
| -rw-r--r-- | doc/kwboot.1 | 2 |
4 files changed, 24 insertions, 3 deletions
diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile index da88b324198..521e8bc0e9b 100644 --- a/doc/DocBook/Makefile +++ b/doc/DocBook/Makefile @@ -8,7 +8,7 @@ include $(TOPDIR)/config.mk -DOCBOOKS := linker_lists.xml stdio.xml +DOCBOOKS := fs.xml linker_lists.xml stdio.xml ### # The build process is as follows (targets): diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx index 5a4b591a89a..f9b023f2841 100644 --- a/doc/README.mpc85xx +++ b/doc/README.mpc85xx @@ -26,7 +26,7 @@ Major Config Switches during various boot Modes ---------------------------------------------- NOR boot - !defined(CONFIG_SYS_RAMBOOT) + !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL) NOR boot Secure !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) RAMBOOT(SD, SPI & NAND boot) diff --git a/doc/README.nand b/doc/README.nand index c130189587b..a1a511c5339 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -108,6 +108,9 @@ Configuration Options: CONFIG_CMD_NAND Enables NAND support and commmands. + CONFIG_CMD_NAND_TORTURE + Enables the torture command (see description of this command below). + CONFIG_MTD_NAND_ECC_JFFS2 Define this if you want the Error Correction Code information in the out-of-band data to be formatted to match the JFFS2 file system. @@ -213,6 +216,24 @@ Miscellaneous and testing commands: DANGEROUS!!! Factory set bad blocks will be lost. Use only to remove artificial bad blocks created with the "markbad" command. + "torture offset" + Torture block to determine if it is still reliable. + Enabled by the CONFIG_CMD_NAND_TORTURE configuration option. + This command returns 0 if the block is still reliable, else 1. + If the block is detected as unreliable, it is up to the user to decide to + mark this block as bad. + The analyzed block is put through 3 erase / write cycles (or less if the block + is detected as unreliable earlier). + This command can be used in scripts, e.g. together with the markbad command to + automate retries and handling of possibly newly detected bad blocks if the + nand write command fails. + It can also be used manually by users having seen some NAND errors in logs to + search the root cause of these errors. + The underlying nand_torture() function is also useful for code willing to + automate actions following a nand->write() error. This would e.g. be required + in order to program or update safely firmware to NAND, especially for the UBI + part of such firmware. + NAND locking command (for chips with active LOCKPRE pin) diff --git a/doc/kwboot.1 b/doc/kwboot.1 index ed0839836ea..25fe69aa5c4 100644 --- a/doc/kwboot.1 +++ b/doc/kwboot.1 @@ -79,6 +79,6 @@ Adjust the baud rate on \fITTY\fP. Default rate is 115200. Daniel Stodden <daniel.stodden@gmail.com> .br -Luka Perkov <uboot@lukaperkov.net> +Luka Perkov <luka@openwrt.org> .br David Purdy <david.c.purdy@gmail.com> |