diff options
author | Tom Rini <trini@konsulko.com> | 2018-04-11 17:00:52 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2018-04-11 17:00:52 -0400 |
commit | 1a7cdb88f58edc5f34f3cb6ba354022827a50b38 (patch) | |
tree | 2270d7b5750ecc335c8ff9fe03480226ca4fda9f /doc | |
parent | d79dfd4519c3f357a2523acfeb26eca6f59eae4d (diff) | |
parent | e5c762f5a7dbeaa21870720e8daf656153e1aef9 (diff) |
Merge git://git.denx.de/u-boot-i2c
Diffstat (limited to 'doc')
-rw-r--r-- | doc/device-tree-bindings/i2c/i2c.txt | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/i2c/i2c.txt b/doc/device-tree-bindings/i2c/i2c.txt index ea918dd61d5..de818d4713f 100644 --- a/doc/device-tree-bindings/i2c/i2c.txt +++ b/doc/device-tree-bindings/i2c/i2c.txt @@ -12,6 +12,11 @@ property which allows the chip offset length to be selected. Optional properties: - u-boot,i2c-offset-len - length of chip offset in bytes. If omitted the default value of 1 is used. +- gpios = <sda ...>, <scl ...>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c_xfer>; + pinctrl-1 = <&i2c_gpio>; + Pin description for I2C bus software deblocking. Example @@ -26,3 +31,11 @@ i2c4: i2c@12ca0000 { ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>; }; }; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_xfer>; + pinctrl-1 = <&i2c1_gpio>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>, /* SDA */ + <&gpio1 27 GPIO_ACTIVE_LOW>; /* SCL */ +}; |