WS cleanup: remove SPACE(s) followed by TAB

Signed-off-by: Wolfgang Denk <wd@denx.de>

13 files changed, 31 insertions, 31 deletions

diff --git a/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt
index f3add0d4e7..c25d7091bf 100644
--- a/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt
+++ b/doc/device-tree-bindings/mailbox/k3-secure-proxy.txt
@@ -10,7 +10,7 @@ Secure Proxy Device Node:
 Required properties:
 --------------------
 - compatible:		Shall be: "ti,am654-secure-proxy"
-- reg-names 		data - Map the data region
+- reg-names		data - Map the data region
 			scfg - Map the secure configuration region
 			rt - Map the Realtime region.
 - reg:			Contains the register map per reg-names.
diff --git a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt
index c4cf26eaa4..dd0260b394 100644
--- a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt
+++ b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt
@@ -11,7 +11,7 @@ Required properties:
 --------------------
 - compatible:		Shall be: "ti,j721e-ddrss" for j721e, j7200
 				  "ti,am64-ddrss" for am642
-- reg-names 		cfg - Map the controller configuration region
+- reg-names		cfg - Map the controller configuration region
 			ctrl_mmr_lp4 - Map LP4 register region in ctrl mmr
 - reg:			Contains the register map per reg-names.
 - power-domains:	Should contain two entries:
diff --git a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt
index 4ed731c524..1e11edf7b1 100644
--- a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt
+++ b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt
@@ -14,7 +14,7 @@ DDRSS device node:
 Required properties:
 --------------------
 - compatible:		Shall be: "ti,am654-ddrss"
-- reg-names 		ss - Map the sub system wrapper logic region
+- reg-names		ss - Map the sub system wrapper logic region
 			ctl - Map the controller region
 			phy - Map the PHY region
 - reg:			Contains the register map per reg-names.
diff --git a/doc/device-tree-bindings/net/altera_tse.txt b/doc/device-tree-bindings/net/altera_tse.txt
index cb190df65f..96ab1d6ebc 100644
--- a/doc/device-tree-bindings/net/altera_tse.txt
+++ b/doc/device-tree-bindings/net/altera_tse.txt
@@ -90,7 +90,7 @@ Example:
 
 	tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
 		compatible = "altr,tse-msgdma-1.0";
-		reg = 	<0x00000001 0x00001000 0x00000400>,
+		reg =	<0x00000001 0x00001000 0x00000400>,
 			<0x00000001 0x00001460 0x00000020>,
 			<0x00000001 0x00001480 0x00000020>,
 			<0x00000001 0x000014A0 0x00000008>,
diff --git a/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt b/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt
index e237825bac..5c6d548cae 100644
--- a/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt
+++ b/doc/device-tree-bindings/net/fsl,mcf-dma-fec.txt
@@ -21,7 +21,7 @@ Example:
 
 fec0: ethernet@9000 {
 	compatible = "fsl,mcf-dma-fec";
- 	reg = <0x9000 0x800>;
+	reg = <0x9000 0x800>;
 	mii-base = <0>;
 	phy-addr = <0>;
 	timeout-loop = <5000>;
diff --git a/doc/device-tree-bindings/net/fsl,mcf-fec.txt b/doc/device-tree-bindings/net/fsl,mcf-fec.txt
index 39bbaa52f3..2699b5ac07 100644
--- a/doc/device-tree-bindings/net/fsl,mcf-fec.txt
+++ b/doc/device-tree-bindings/net/fsl,mcf-fec.txt
@@ -15,7 +15,7 @@ Example:
 
 fec0: ethernet@fc030000 {
 	compatible = "fsl,mcf-fec";
- 	reg = <0xfc030000 0x400>;
+	reg = <0xfc030000 0x400>;
 	mii-base = <0>;
 	phy-addr = <0>;
 	timeout-loop = <5000>;
diff --git a/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt b/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt
index 2034f05993..ace66ead5c 100644
--- a/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt
+++ b/doc/device-tree-bindings/pinctrl/bcm6838-pinctrl.txt
@@ -2,7 +2,7 @@
 
 Required properties for the pinctrl driver:
 - compatible:	   "brcm,bcm6838-pinctrl"
-- regmap: 		   specify the gpio test port syscon
+- regmap:		   specify the gpio test port syscon
 - brcm,pins-count:      the number of pin
 - brcm,functions-count: the number of function
 
diff --git a/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt b/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt
index 51f2f2c79c..0d6f861445 100644
--- a/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt
+++ b/doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt
@@ -3,19 +3,19 @@
 ----------------------------------------------------------------------
 MPP#	0x1			0x2		0x3		0x4
 ----------------------------------------------------------------------
-0	SDIO_CLK		-		SPI0_CLK 	-
+0	SDIO_CLK		-		SPI0_CLK	-
 1	SDIO_CMD		-		SPI0_MISO	-
-2	SDIO_D[0]		-		SPI0_MOSI 	-
-3	SDIO_D[1]		-		SPI0_CS0n 	-
+2	SDIO_D[0]		-		SPI0_MOSI	-
+3	SDIO_D[1]		-		SPI0_CS0n	-
 4	SDIO_D[2]		-		I2C0_SDA	SPI0_CS1n
 5	SDIO_D[3]		-		I2C0_SCK	-
 6	SDIO_DS			-		-		-
 7	SDIO_D[4]		-		UART1_RXD	-
-8	SDIO_D[5]		-		UART1_TXD 	-
-9	SDIO_D[6]		-		SPI0_CS1n 	-
+8	SDIO_D[5]		-		UART1_TXD	-
+9	SDIO_D[6]		-		SPI0_CS1n	-
 10	SDIO_D[7]		-		-		-
-11	-			-		UART0_TXD 	-
-12	SDIO_CARD_PW_OFF 	SDIO_HW_RST 	-		-
+11	-			-		UART0_TXD	-
+12	SDIO_CARD_PW_OFF	SDIO_HW_RST	-		-
 13	-			-		-		-
 14	-			-		-		-
 15	-			-		-		-
diff --git a/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt b/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt
index 1fc1bc6645..c6984ddd60 100644
--- a/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt
+++ b/doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -11,7 +11,7 @@ Required properties for the pinctrl driver:
 		"marvell,armada-8k-cpm-pinctrl",
 		"marvell,armada-8k-cps-pinctrl"
 - bank-name:	A string defining the pinc controller bank name
-- reg: 		A pair of values defining the pin controller base address
+- reg:		A pair of values defining the pin controller base address
 		and the address space
 - pin-count:	Numeric value defining the amount of multi purpose pins
 		included in this bank
diff --git a/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt
index 2a60e4941b..bd272384af 100644
--- a/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt
+++ b/doc/device-tree-bindings/regulator/fsl,anatop-regulator.txt
@@ -8,21 +8,21 @@ Required properties:
 - anatop-reg-offset:	u32 value representing the anatop MFD register offset.
 - anatop-vol-bit-shift:	u32 value representing the bit shift for the register.
 - anatop-vol-bit-width:	u32 value representing the number of bits used in the
-  			register.
+			register.
 - anatop-min-bit-val:	u32 value representing the minimum value of this
-  			register.
+			register.
 - anatop-min-voltage:	u32 value representing the minimum voltage of this
-  			regulator.
+			regulator.
 - anatop-max-voltage:	u32 value representing the maximum voltage of this
-  			regulator.
+			regulator.
 
 Optional properties:
 - anatop-delay-reg-offset: u32 value representing the anatop MFD step time
-  			   register offset.
+			   register offset.
 - anatop-delay-bit-shift: u32 value representing the bit shift for the step
-  			  time register.
+			  time register.
 - anatop-delay-bit-width: u32 value representing the number of bits used in
-  			  the step time register.
+			  the step time register.
 - anatop-enable-bit:	  u32 value representing regulator enable bit offset.
 - vin-supply:		  input supply phandle.
 
diff --git a/doc/device-tree-bindings/spi/spi-bus.txt b/doc/device-tree-bindings/spi/spi-bus.txt
index 420ec9529f..e57897ac0c 100644
--- a/doc/device-tree-bindings/spi/spi-bus.txt
+++ b/doc/device-tree-bindings/spi/spi-bus.txt
@@ -8,10 +8,10 @@ in slave mode.
 
 The SPI master node requires the following properties:
 - #address-cells  - number of cells required to define a chip select
-    		address on the SPI bus.
+		address on the SPI bus.
 - #size-cells     - should be zero.
 - compatible      - name of SPI bus controller following generic names
-    		recommended practice.
+		recommended practice.
 - cs-gpios	  - (optional) gpios chip select.
 No other properties are required in the SPI bus node.  It is assumed
 that a driver for an SPI bus device will understand that it is an SPI bus.
@@ -45,16 +45,16 @@ SPI slave nodes must be children of the SPI master node and can
 contain the following properties.
 - reg             - (required) chip select address of device.
 - compatible      - (required) name of SPI device following generic names
-    		recommended practice
+		recommended practice
 - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
 - spi-cpol        - (optional) Empty property indicating device requires
-    		inverse clock polarity (CPOL) mode
+		inverse clock polarity (CPOL) mode
 - spi-cpha        - (optional) Empty property indicating device requires
-    		shifted clock phase (CPHA) mode
+		shifted clock phase (CPHA) mode
 - spi-cs-high     - (optional) Empty property indicating device requires
-    		chip select active high
+		chip select active high
 - spi-3wire       - (optional) Empty property indicating device requires
-    		    3-wire mode.
+		    3-wire mode.
 - spi-tx-bus-width - (optional) The bus width(number of data wires) that
                       used for MOSI. Defaults to 1 if not present.
 - spi-rx-bus-width - (optional) The bus width(number of data wires) that
diff --git a/doc/device-tree-bindings/spi/spi-qup.txt b/doc/device-tree-bindings/spi/spi-qup.txt
index 3697df2631..2f2f070c5a 100644
--- a/doc/device-tree-bindings/spi/spi-qup.txt
+++ b/doc/device-tree-bindings/spi/spi-qup.txt
@@ -7,7 +7,7 @@ Required properties:
 - reg : Physical base address and size of SPI registers map.
 - clock	: Clock phandle (see clock bindings for details).
 - #address-cells : Number of cells required to define a chip select
-                	address on the SPI bus. Should be set to 1.
+			address on the SPI bus. Should be set to 1.
 - #size-cells : Should be zero.
 - pinctrl-names : Must be "default"
 - pinctrl-n : At least one pinctrl phandle
diff --git a/doc/device-tree-bindings/tpm2/sandbox.txt b/doc/device-tree-bindings/tpm2/sandbox.txt
index 3d0f727cc4..05a310e057 100644
--- a/doc/device-tree-bindings/tpm2/sandbox.txt
+++ b/doc/device-tree-bindings/tpm2/sandbox.txt
@@ -7,5 +7,5 @@ Required properties:
 Example:
 
 	tpm {
- 		compatible = "sandbox,tpm2";
+		compatible = "sandbox,tpm2";
 	};