summaryrefslogtreecommitdiff
path: root/doc/README.t1040-l2switch
diff options
context:
space:
mode:
authorCodrin Ciubotariu <codrin.ciubotariu@freescale.com>2015-12-15 15:21:06 +0200
committerJoe Hershberger <joe.hershberger@ni.com>2016-01-28 12:22:19 -0600
commitaae0e68909bf2ef1b60d18c54105ab8b9c67c5a2 (patch)
tree5ee618d3daa2488bf3cd18d0d8caaa03b84e75a3 /doc/README.t1040-l2switch
parentbf9f2ed83b16c6d037609278f66dbf54f40b1903 (diff)
drivers: net: vsc9953: Add LAG support
You can now configure LAG on VSC9953's ports using the command: ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>} A port must belong to a single LAG. By default, a port belongs to a LAG equal to the port's number. For each frame, a hash will be calculated based on Source/Destination MAC addresses, Source/Destination IP(v4/v6) addresses, Source/Destination ports. This hash will be used to select a single egress port from LAG. This also assures that frames from the same flow will always have the same egress port. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'doc/README.t1040-l2switch')
-rw-r--r--doc/README.t1040-l2switch2
1 files changed, 2 insertions, 0 deletions
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch
index 4e0f418c7c7..6f03de239e6 100644
--- a/doc/README.t1040-l2switch
+++ b/doc/README.t1040-l2switch
@@ -31,6 +31,7 @@ Commands supported
- Port-based VLAN
- Private/Shared VLAN learning
- VLAN ingress filtering
+ - Port LAG
Commands syntax
ethsw [port <port_no>] { enable | disable | show } - enable/disable a port; show a port's configuration
@@ -45,6 +46,7 @@ ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - config
Tag's VID could be the frame's classified VID or the PVID of the port
ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private
ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port
+ethsw [port <port_no>] aggr { [help] | show | <lag_group_no> } - get/set LAG group for a port
=> ethsw show
Port Status Link Speed Duplex