SPEAr: Add configuration options for spear3xx and spear6xx boards

This patch adds options for all the below mentioned configurations and
subsequently renames the include/configs/spearxxx.h files to spear3xx_evb.h,
spear6xx_evb.h etc to depict evaluation board configuration.

SPEAr3xx and SPEAr6xx boards can be compiled in following configurations
1. Environment placed in NAND
2. Console on usb device
3. Console on usb device with environment placed in NAND
4. SPEAr310 and SPEAr320 support environment variables in parallel
NOR flash.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 34 insertions, 16 deletions

diff --git a/doc/README.spear b/doc/README.spear
index a6ff7fdaefd..0789b3fd270 100644
--- a/doc/README.spear
+++ b/doc/README.spear
@@ -6,9 +6,10 @@ SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
 The SPEAr SoC family embeds a customizable logic that can be programmed
 one-time by a customer at silicon mask level (i.e. not at runtime!).
 
-We are now adding the support in u-boot for two SoC: SPEAr600 and SPEAr3xx.
+U-Boot supports four SoCs: SPEAr600, SPEAr3xx
 
-All 4 SoCs share common peripherals.
+All 4 SoCs (SPEAr3xx and SPEAr600) share common peripherals. SPEAr300 and
+SPEAr600 do not have EMI.
 
 1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
 2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
@@ -22,7 +23,7 @@ All 4 SoCs share common peripherals.
 10. others ..
 
 Everything is supported in Linux.
-u-boot is not currently supporting all peripeharls (just a few as listed below).
+u-boot is currently not supporting all peripeharls (just a few as listed below).
 1. USB Device
 2. NAND controller (FSMC)
 3. Serial Memory Interface
@@ -31,21 +32,38 @@ u-boot is not currently supporting all peripeharls (just a few as listed below).
 5. UART
 
 Build options
-	make spear600_config
+	make spear320_config
+		spear320 build with environment variables placed at default
+		location i.e. Serial NOR device
+	make spear320_pnor_config
+		This option generates a uboot image that supports emi controller
+		for CFI compliant parallel NOR flash. Environment variables are
+		placed in Parallel NOR device
+	make spear320_nand_config
+		spear320 build with environment variables placed in NAND device
+	make spear320_usbtty_config
+		spear320 build with usbtty terminal as default and environment
+		placed at default location
+	make spear320_usbtty_pnor_config
+		spear320 build with usbtty terminal as default and environment
+		placed in pnor device
+	make spear320_usbtty_nand_config
+		Build with usbtty terminal as default and environment placed in
+		NAND device
 	make spear300_config
+	make spear300_nand_config
+	make spear300_usbtty_config
+	make spear300_usbtty_nand_config
 	make spear310_config
-	make spear320_config
-
-Further options
-	make ENV=NAND (supported by all 4 SoCs)
-	- This option generates a uboot image that saves environment inn NAND
-
-	make CONSOLE=USB (supported by all 4 SoCs)
-	- This option generates a uboot image for using usbdevice as a tty i/f
-
-	make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
-	- This option generates a uboot image that supports emi controller for
-	CFI compliant parallel NOR flash
+	make spear310_pnor_config
+	make spear310_nand_config
+	make spear310_usbtty_config
+	make spear310_usbtty_pnor_config
+	make spear310_usbtty_nand_config
+	make spear600_config
+	make spear600_nand_config
+	make spear600_usbtty_config
+	make spear600_usbtty_nand_config
 
 Mac id storage and retrieval in spear platforms