summaryrefslogtreecommitdiff
path: root/doc/README.sh
diff options
context:
space:
mode:
authorNobuhiro Iwamatsu <iwamatsu@nigauri.org>2007-11-25 02:51:17 +0900
committerNobuhiro Iwamatsu <iwamatsu@nigauri.org>2007-11-29 01:17:48 +0900
commit130080874a3d28450098481a262c5f7c855e908d (patch)
tree8241943f91d1f5c929e9d78a45606434a1912080 /doc/README.sh
parent33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d (diff)
sh: Add document for SuperH.
This document is a summary of information concerning SuperH of U-Boot. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Diffstat (limited to 'doc/README.sh')
-rw-r--r--doc/README.sh62
1 files changed, 62 insertions, 0 deletions
diff --git a/doc/README.sh b/doc/README.sh
new file mode 100644
index 00000000000..0441a7a6462
--- /dev/null
+++ b/doc/README.sh
@@ -0,0 +1,62 @@
+
+U-Boot for Renesas SuperH
+ Last update 08/10/2007 by Nobuhiro Iwamatsu
+
+================================================================================
+0. What's this?
+ This file contains status information for the port of U-Boot to the
+ Renesas SuperH series of CPUs.
+
+================================================================================
+1. Overview
+ SuperH has an original boot loader. However, source code is dirty, and
+ maintenance is not done.
+ To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
+ started the porting to u-boot in 2007.
+
+================================================================================
+2. Supported CPUs
+
+ 2.1. Renesas SH7750/SH7750R
+ 2.2. Renesas SH7722
+
+================================================================================
+3. Supported Boards
+
+ 3.1. Hitachi UL MS7750SE01/MS7750RSE01
+ Board specific code is in board/ms7750se
+ To use this board, type "make ms7750se_config".
+
+ 3.2. Hitachi UL MS7722SE01
+ Board specific code is in board/ms7722se
+ To use this board, type "make ms7722se_config".
+
+ ** README **
+ In SuperH, S-record and binary of made u-boot work on the memory.
+ When u-boot is written in the flash, it is necessary to change the
+ address by using 'objcopy'.
+ ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
+
+================================================================================
+4. Compiler
+ You can use the following of u-boot to compile.
+ - SuperH Linux Open site
+ http://www.superh-linux.org/
+ - KPIT GNU tools
+ http://www.kpitgnutools.com/
+
+================================================================================
+5. Future
+ I plan to support the following CPUs and boards.
+ 5.1. CPUs
+ - SH7710/SH7712 (SH3)
+ - SH7780(SH4)
+ - SH7785(SH4)
+
+ 5.2. Boards
+ - Many boards ;-)
+
+================================================================================
+Copyright (c) 2007
+ Nobuhiro Iwamatsu <iwamatsu@nigaur.org>
+