summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-01-05 10:13:40 +0100
committerStefan Roese <sr@denx.de>2008-01-05 10:13:40 +0100
commit6399b23d60300e91b4e724a622b6819660f6044f (patch)
tree661c39d5bcd0a14fec3f5be48ab5653186944276 /cpu
parent49db47b8ae6afff2b898be312948ff501357dc80 (diff)
parent5ba576c01602fd328800a427964c36a0a05c5dce (diff)
Merge branch 'katmai-ddr-gda'
Diffstat (limited to 'cpu')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c96
1 files changed, 37 insertions, 59 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index e19929437e2..3ac2cdcf7f4 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -3,7 +3,7 @@
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those are 440SP/SPe.
*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* COPYRIGHT AMCC CORPORATION 2004
@@ -111,8 +111,6 @@
#define NUMMEMWORDS 8
#define NUMLOOPS 64 /* memory test loops */
-#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
@@ -2268,39 +2266,6 @@ static void program_ecc(unsigned long *dimm_populated,
return;
}
-#ifdef CONFIG_ECC_ERROR_RESET
-/*
- * Check for ECC errors and reset board upon any error here
- *
- * On the Katmai 440SPe eval board, from time to time, the first
- * lword write access after DDR2 initializazion with ECC checking
- * enabled, leads to an ECC error. I couldn't find a configuration
- * without this happening. On my board with the current setup it
- * happens about 1 from 10 times.
- *
- * The ECC modules used for testing are:
- * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's)
- *
- * This has to get fixed for the Katmai and tested for the other
- * board (440SP/440SPe) that will eventually use this code in the
- * future.
- *
- * 2007-03-01, sr
- */
-static void check_ecc(void)
-{
- u32 val;
-
- mfsdram(SDRAM_ECCCR, val);
- if (val != 0) {
- printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n",
- val, mfdcr(0x4c), mfdcr(0x4e));
- printf("ECC error occured, resetting board...\n");
- do_reset(NULL, 0, 0, NULL);
- }
-}
-#endif
-
static void wait_ddr_idle(void)
{
u32 val;
@@ -2375,15 +2340,6 @@ static void program_ecc_addr(unsigned long start_address,
sync();
eieio();
wait_ddr_idle();
-
-#ifdef CONFIG_ECC_ERROR_RESET
- /*
- * One write to 0 is enough to trigger this ECC error
- * (see description above)
- */
- out_be32(0, 0x12345678);
- check_ecc();
-#endif
}
}
#endif
@@ -2409,17 +2365,10 @@ static void program_DQS_calibration(unsigned long *dimm_populated,
* Read sample cycle auto-update enable
*-----------------------------------------------------------------*/
- /*
- * Modified for the Katmai platform: with some DIMMs, the DDR2
- * controller automatically selects the T2 read cycle, but this
- * proves unreliable. Go ahead and force the DDR2 controller
- * to use the T4 sample and disable the automatic update of the
- * RDSS field.
- */
mfsdram(SDRAM_RDCC, val);
mtsdram(SDRAM_RDCC,
(val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | (SDRAM_RDCC_RDSS_T4 | SDRAM_RDCC_RSAE_DISABLE));
+ | SDRAM_RDCC_RSAE_ENABLE);
/*------------------------------------------------------------------
* Program RQDC register
@@ -2512,10 +2461,7 @@ static void DQS_calibration_process(void)
{
unsigned long rfdc_reg;
unsigned long rffd;
- unsigned long rqdc_reg;
- unsigned long rqfd;
unsigned long val;
- long rqfd_average;
long rffd_average;
long max_start;
long min_end;
@@ -2533,10 +2479,14 @@ static void DQS_calibration_process(void)
long max_end;
unsigned char fail_found;
unsigned char pass_found;
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ u32 rqdc_reg;
+ u32 rqfd;
u32 rqfd_start;
+ u32 rqfd_average;
+ int loopi = 0;
char str[] = "Auto calibration -";
char slash[] = "\\|/-\\|/-";
- int loopi = 0;
/*------------------------------------------------------------------
* Test to determine the best read clock delay tuning bits.
@@ -2571,6 +2521,16 @@ calibration_loop:
mfsdram(SDRAM_RQDC, rqdc_reg);
mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
+#else /* CONFIG_DDR_RQDC_FIXED */
+ /*
+ * On Katmai the complete auto-calibration somehow doesn't seem to
+ * produce the best results, meaning optimal values for RQFD/RFFD.
+ * This was discovered by GDA using a high bandwidth scope,
+ * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ * so now on Katmai "only" RFFD is auto-calibrated.
+ */
+ mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
+#endif /* CONFIG_DDR_RQDC_FIXED */
max_start = 0;
min_end = 0;
@@ -2655,6 +2615,7 @@ calibration_loop:
/* now fix RFDC[RFFD] found and find RQDC[RQFD] */
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#if !defined(CONFIG_DDR_RQDC_FIXED)
max_pass_length = 0;
max_start = 0;
max_end = 0;
@@ -2727,8 +2688,6 @@ calibration_loop:
spd_ddr_init_hang ();
}
- blank_string(strlen(str));
-
if (rqfd_average < 0)
rqfd_average = 0;
@@ -2739,12 +2698,31 @@ calibration_loop:
(rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+ blank_string(strlen(str));
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ /*
+ * Now complete RDSS configuration as mentioned on page 7 of the AMCC
+ * PowerPC440SP/SPe DDR2 application note:
+ * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+ */
+ mfsdram(SDRAM_RTSR, val);
+ if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
+ mfsdram(SDRAM_RDCC, val);
+ if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
+ val += 0x40000000;
+ mtsdram(SDRAM_RDCC, val);
+ }
+ }
+
mfsdram(SDRAM_DLCR, val);
debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RQDC, val);
debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RFDC, val);
debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RDCC, val);
+ debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
}
#else /* calibration test with hardvalues */
/*-----------------------------------------------------------------------------+