diff options
author | Wolfgang Denk <wd@pollux.denx.de> | 2005-08-06 01:42:58 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@pollux.denx.de> | 2005-08-06 01:42:58 +0200 |
commit | f901a83b70a586cef89682843e2d16d6c7b2288a (patch) | |
tree | 139e02c9726dd0b2786f644a1a646e3d6fba028b /cpu/ppc4xx | |
parent | 5633796c090340238b025dff4b8107be8509a68b (diff) |
Add support for ep8248 board
Patch by Yuli Barcohen, 12 Dec 2004
Minor code cleanup.
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r-- | cpu/ppc4xx/start.S | 248 |
1 files changed, 124 insertions, 124 deletions
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 788c71cc2e5..730f3ca801b 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -158,8 +158,8 @@ _start_440: /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ - iccci r0,r0 /* NOTE: operands not used for 440 */ - dccci r0,r0 /* NOTE: operands not used for 440 */ + iccci r0,r0 /* NOTE: operands not used for 440 */ + dccci r0,r0 /* NOTE: operands not used for 440 */ sync li r0,0 mtspr srr0,r0 @@ -167,10 +167,10 @@ _start_440: mtspr csrr0,r0 mtspr csrr1,r0 #if defined (CONFIG_440_GX) /* NOTE: 440GX adds machine check status regs */ - mtspr mcsrr0,r0 - mtspr mcsrr1,r0 - mfspr r1, mcsr - mtspr mcsr,r1 + mtspr mcsrr0,r0 + mtspr mcsrr1,r0 + mfspr r1, mcsr + mtspr mcsr,r1 #endif /*----------------------------------------------------------------*/ /* Initialize debug */ @@ -204,13 +204,13 @@ _start_440: /* Setup interrupt vectors */ /*----------------------------------------------------------------*/ mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */ - li r1,0x0100 + li r1,0x0100 mtspr ivor0,r1 /* Critical input */ - li r1,0x0200 + li r1,0x0200 mtspr ivor1,r1 /* Machine check */ - li r1,0x0300 + li r1,0x0300 mtspr ivor2,r1 /* Data storage */ - li r1,0x0400 + li r1,0x0400 mtspr ivor3,r1 /* Instruction storage */ li r1,0x0500 mtspr ivor4,r1 /* External interrupt */ @@ -349,8 +349,8 @@ _start: b __440gx_msr_continue __440gx_msr_set: - lis r1, 0x0002 /* set CE bit (Critical Exceptions) */ - ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */ + lis r1, 0x0002 /* set CE bit (Critical Exceptions) */ + ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */ mtspr srr1,r1 mflr r1 mtspr srr0,r1 @@ -379,23 +379,23 @@ __440gx_msr_continue: li r0,0 #if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) /* Clear Dcache to use as RAM */ - addis r3,r0,CFG_INIT_RAM_ADDR@h - ori r3,r3,CFG_INIT_RAM_ADDR@l - addis r4,r0,CFG_INIT_RAM_END@h - ori r4,r4,CFG_INIT_RAM_END@l + addis r3,r0,CFG_INIT_RAM_ADDR@h + ori r3,r3,CFG_INIT_RAM_ADDR@l + addis r4,r0,CFG_INIT_RAM_END@h + ori r4,r4,CFG_INIT_RAM_END@l rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ran - addi r5,r5,0x0001 + rlwinm r5,r4,27,5,31 + beq ..d_ran + addi r5,r5,0x0001 ..d_ran: - mtctr r5 + mtctr r5 ..d_ag: - dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag + dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag #else #if defined (CONFIG_440_GX) - mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */ + mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */ #endif mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ @@ -411,16 +411,16 @@ __440gx_msr_continue: lis r1,0x8000 /* BAS = 8000_0000 */ #if defined(CONFIG_440_GX) ori r1,r1,0x0980 /* first 64k */ - mtdcr isram0_sb0cr,r1 + mtdcr isram0_sb0cr,r1 lis r1,0x8001 ori r1,r1,0x0980 /* second 64k */ - mtdcr isram0_sb1cr,r1 + mtdcr isram0_sb1cr,r1 lis r1, 0x8002 ori r1,r1, 0x0980 /* third 64k */ - mtdcr isram0_sb2cr,r1 + mtdcr isram0_sb2cr,r1 lis r1, 0x8003 ori r1,r1, 0x0980 /* fourth 64k */ - mtdcr isram0_sb3cr,r1 + mtdcr isram0_sb3cr,r1 #else ori r1,r1,0x0380 /* 8k rw */ mtdcr isram0_sb0cr,r1 @@ -610,11 +610,11 @@ __440gx_msr_continue: /*----------------------------------------------------------------------- */ /* DMA Status, clear to come up clean */ /*----------------------------------------------------------------------- */ - addis r3,r0, 0xFFFF /* Clear all existing DMA status */ - ori r3,r3, 0xFFFF - mtdcr dmasr, r3 + addis r3,r0, 0xFFFF /* Clear all existing DMA status */ + ori r3,r3, 0xFFFF + mtdcr dmasr, r3 - bl ppc405ep_init /* do ppc405ep specific init */ + bl ppc405ep_init /* do ppc405ep specific init */ #endif /* CONFIG_405EP */ #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE) @@ -624,7 +624,7 @@ __440gx_msr_continue: /* Setup OCM */ lis r0, 0x7FFF ori r0, r0, 0xFFFF - mfdcr r3, ocmiscntl /* get instr-side IRAM config */ + mfdcr r3, ocmiscntl /* get instr-side IRAM config */ mfdcr r4, ocmdscntl /* get data-side IRAM config */ and r3, r3, r0 /* disable data-side IRAM */ and r4, r4, r0 /* disable data-side IRAM */ @@ -666,13 +666,13 @@ __440gx_msr_continue: /* set stack pointer and clear stack to known value */ lis r1,CFG_INIT_RAM_ADDR@h - ori r1,r1,CFG_INIT_SP_OFFSET@l + ori r1,r1,CFG_INIT_SP_OFFSET@l li r4,2048 /* we store 2048 words to stack */ mtctr r4 lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */ - ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */ + ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */ lis r4,0xdead /* we store 0xdeaddead in the stack */ ori r4,r4,0xdead @@ -721,7 +721,7 @@ __440gx_msr_continue: #endif /* CFG_INIT_DCACHE_CS */ /*----------------------------------------------------------------------- */ - /* Initialize SDRAM Controller */ + /* Initialize SDRAM Controller */ /*----------------------------------------------------------------------- */ bl sdram_init @@ -747,11 +747,11 @@ __440gx_msr_continue: ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ -#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ +#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ GET_GOT /* initialize GOT access */ - bl cpu_init_f /* run low-level CPU init code (from Flash) */ + bl cpu_init_f /* run low-level CPU init code (from Flash) */ /* NEVER RETURNS! */ bl board_init_f /* run first part of init code (from Flash) */ @@ -976,8 +976,8 @@ invalidate_dcache: addi r6,0,0x0000 /* clear GPR 6 */ /* Do loop for # of dcache congruence classes. */ #if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR) - lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ - ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l + lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ + ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l #else addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) #endif @@ -1002,16 +1002,16 @@ flush_dcache: /* do loop for # of congruence classes. */ #if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR) - lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */ - ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l - lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */ - ori r11,r11,(CFG_DCACHE_SIZE / 2)@l /* D cache set size - 2 way sets */ + lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */ + ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l + lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */ + ori r11,r11,(CFG_DCACHE_SIZE / 2)@l /* D cache set size - 2 way sets */ #else addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */ #endif mtctr r10 - addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */ + addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */ add r11,r10,r11 /* add to get to other side of cache line */ ..flush_dcache_loop: lwz r3,0(r10) /* least recently used side */ @@ -1229,12 +1229,12 @@ ppcSync: .globl relocate_code relocate_code: #if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) - dccci 0,0 /* Invalidate data cache, now no longer our stack */ + dccci 0,0 /* Invalidate data cache, now no longer our stack */ sync - addi r1,r0,0x0000 /* Tlb entry #0 */ + addi r1,r0,0x0000 /* Tlb entry #0 */ tlbre r0,r1,0x0002 /* Read contents */ - ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */ - tlbwe r0,r1,0x0002 /* Save it out */ + ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */ + tlbwe r0,r1,0x0002 /* Save it out */ isync #endif mr r1, r3 /* Set new stack pointer */ @@ -1455,7 +1455,7 @@ trap_reloc: /**************************************************************************/ -/* PPC405EP specific stuff */ +/* PPC405EP specific stuff */ /**************************************************************************/ #ifdef CONFIG_405EP ppc405ep_init: @@ -1539,7 +1539,7 @@ ppc405ep_init: mtdcr ebccfgd,r3 #endif - addi r3,0,CPC0_PCI_HOST_CFG_EN + addi r3,0,CPC0_PCI_HOST_CFG_EN #ifdef CONFIG_BUBINGA /* !----------------------------------------------------------------------- @@ -1547,30 +1547,30 @@ ppc405ep_init: ! If board is set to internal arbitration, update cpc0_pci !----------------------------------------------------------------------- */ - addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ - ori r5,r5,FPGA_REG1@l - lbz r5,0x0(r5) /* read to get PCI arb selection */ - andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ - beq ..pci_cfg_set /* if not set, then bypass reg write*/ + addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ + ori r5,r5,FPGA_REG1@l + lbz r5,0x0(r5) /* read to get PCI arb selection */ + andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ + beq ..pci_cfg_set /* if not set, then bypass reg write*/ #endif - ori r3,r3,CPC0_PCI_ARBIT_EN + ori r3,r3,CPC0_PCI_ARBIT_EN ..pci_cfg_set: - mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ + mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a ! CPU reset Otherwise, skip this step and keep going. - ! Note: Running BIOS in bypass mode is not supported since PLB speed - ! will not be fast enough for the SDRAM (min 66MHz) + ! Note: Running BIOS in bypass mode is not supported since PLB speed + ! will not be fast enough for the SDRAM (min 66MHz) !----------------------------------------------------------------------- */ - mfdcr r5, CPC0_PLLMR1 - rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */ - cmpi cr0,0,r4,0x1 + mfdcr r5, CPC0_PLLMR1 + rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */ + cmpi cr0,0,r4,0x1 - beq pll_done /* if SSCS =b'1' then PLL has */ + beq pll_done /* if SSCS =b'1' then PLL has */ /* already been set */ /* and CPU has been reset */ /* so skip to next section */ @@ -1584,40 +1584,40 @@ ppc405ep_init: ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above. ! ! WARNING: This code assumes the first three words in the nvram_t - ! structure in openbios.h. Changing the beginning of - ! the structure will break this code. + ! structure in openbios.h. Changing the beginning of + ! the structure will break this code. ! !----------------------------------------------------------------------- */ - addis r3,0,NVRAM_BASE@h - addi r3,r3,NVRAM_BASE@l - - lwz r4, 0(r3) - addis r5,0,NVRVFY1@h - addi r5,r5,NVRVFY1@l - cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/ - bne ..no_pllset - addi r3,r3,4 - lwz r4, 0(r3) - addis r5,0,NVRVFY2@h - addi r5,r5,NVRVFY2@l - cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */ - bne ..no_pllset - addi r3,r3,8 /* Skip over conf_size */ - lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */ - lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */ - rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */ - cmpi cr0,0,r5,1 /* See if PLL is locked */ - beq pll_write + addis r3,0,NVRAM_BASE@h + addi r3,r3,NVRAM_BASE@l + + lwz r4, 0(r3) + addis r5,0,NVRVFY1@h + addi r5,r5,NVRVFY1@l + cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/ + bne ..no_pllset + addi r3,r3,4 + lwz r4, 0(r3) + addis r5,0,NVRVFY2@h + addi r5,r5,NVRVFY2@l + cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */ + bne ..no_pllset + addi r3,r3,8 /* Skip over conf_size */ + lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */ + lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */ + rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */ + cmpi cr0,0,r5,1 /* See if PLL is locked */ + beq pll_write ..no_pllset: #endif /* CONFIG_BUBINGA */ - addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ - ori r3,r3,PLLMR0_DEFAULT@l /* */ - addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ - ori r4,r4,PLLMR1_DEFAULT@l /* */ + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ + ori r3,r3,PLLMR0_DEFAULT@l /* */ + addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ + ori r4,r4,PLLMR1_DEFAULT@l /* */ - b pll_write /* Write the CPC0_PLLMR with new value */ + b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: /* @@ -1626,27 +1626,27 @@ pll_done: ! This is needed to enable PCI if not booting from serial EPROM !----------------------------------------------------------------------- */ - addi r3, 0, 0x0 - mtdcr CPC0_SRR, r3 + addi r3, 0, 0x0 + mtdcr CPC0_SRR, r3 - addis r3,0,0x0010 - mtctr r3 + addis r3,0,0x0010 + mtctr r3 pci_wait: - bdnz pci_wait + bdnz pci_wait blr /* return to main code */ /* !----------------------------------------------------------------------------- -! Function: pll_write -! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation -! That is: -! 1. Pll is first disabled (de-activated by putting in bypass mode) -! 2. PLL is reset -! 3. Clock dividers are set while PLL is held in reset and bypassed -! 4. PLL Reset is cleared -! 5. Wait 100us for PLL to lock -! 6. A core reset is performed +! Function: pll_write +! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation +! That is: +! 1. Pll is first disabled (de-activated by putting in bypass mode) +! 2. PLL is reset +! 3. Clock dividers are set while PLL is held in reset and bypassed +! 4. PLL Reset is cleared +! 5. Wait 100us for PLL to lock +! 6. A core reset is performed ! Input: r3 = Value to write to CPC0_PLLMR0 ! Input: r4 = Value to write to CPC0_PLLMR1 ! Output r3 = none @@ -1655,41 +1655,41 @@ pci_wait: pll_write: mfdcr r5, CPC0_UCR andis. r5,r5,0xFFFF - ori r5,r5,0x0101 /* Stop the UART clocks */ - mtdcr CPC0_UCR,r5 /* Before changing PLL */ + ori r5,r5,0x0101 /* Stop the UART clocks */ + mtdcr CPC0_UCR,r5 /* Before changing PLL */ mfdcr r5, CPC0_PLLMR1 - rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */ - mtdcr CPC0_PLLMR1,r5 - oris r5,r5,0x4000 /* Set PLL Reset */ - mtdcr CPC0_PLLMR1,r5 - - mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */ - rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */ - oris r5,r5,0x4000 /* Set PLL Reset */ - mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */ - rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */ - mtdcr CPC0_PLLMR1,r5 + rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */ + mtdcr CPC0_PLLMR1,r5 + oris r5,r5,0x4000 /* Set PLL Reset */ + mtdcr CPC0_PLLMR1,r5 + + mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */ + rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */ + oris r5,r5,0x4000 /* Set PLL Reset */ + mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */ + rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */ + mtdcr CPC0_PLLMR1,r5 /* ! Wait min of 100us for PLL to lock. ! See CMOS 27E databook for more info. ! At 200MHz, that means waiting 20,000 instructions */ - addi r3,0,20000 /* 2000 = 0x4e20 */ - mtctr r3 + addi r3,0,20000 /* 2000 = 0x4e20 */ + mtctr r3 pll_wait: - bdnz pll_wait + bdnz pll_wait - oris r5,r5,0x8000 /* Enable PLL */ - mtdcr CPC0_PLLMR1,r5 /* Engage */ + oris r5,r5,0x8000 /* Enable PLL */ + mtdcr CPC0_PLLMR1,r5 /* Engage */ /* * Reset CPU to guarantee timings are OK * Not sure if this is needed... */ addis r3,0,0x1000 - mtspr dbcr0,r3 /* This will cause a CPU core reset, and */ + mtspr dbcr0,r3 /* This will cause a CPU core reset, and */ /* execution will continue from the poweron */ /* vector of 0xfffffffc */ #endif /* CONFIG_405EP */ |