summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2006-11-27 14:46:06 +0100
committerStefan Roese <sr@denx.de>2006-11-27 14:46:06 +0100
commitec0c2ec725aec9524a177a77ce75559e644a931a (patch)
tree980ba07ed67b7e2b9276973c487f4b0b74f9eb24 /cpu/ppc4xx
parent1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 (diff)
[PATCH] Remove testing 4xx enet PHY setup
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/4xx_enet.c17
1 files changed, 1 insertions, 16 deletions
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 8c517baf3b1..7a2483c3cd8 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -560,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
* otherwise, just check the speeds & feeds
*/
if (hw_p->first_init == 0) {
-#if defined(CONFIG_88E1111_CLK_DELAY)
- /*
- * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
- * the "RGMII transmit timing control" and "RGMII receive
- * timing control" bits set, so that Gbit communication works
- * without problems.
- * Also set the "Transmitter disable" to 1 to enable the
- * transmitter.
- * After setting these bits a soft-reset must occur for this
- * change to become active.
- */
- miiphy_read (dev->name, reg, 0x14, &reg_short);
- reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
- miiphy_write (dev->name, reg, 0x14, reg_short);
-#endif
-#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+#if defined(CONFIG_M88E1111_PHY)
miiphy_write (dev->name, reg, 0x14, 0x0ce3);
miiphy_write (dev->name, reg, 0x18, 0x4101);
miiphy_write (dev->name, reg, 0x09, 0x0e00);