summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/serial.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-06 23:19:44 +0000
committerwdenk <wdenk>2004-02-06 23:19:44 +0000
commitba56f625767d058b0e05a22729de13be5e0f6334 (patch)
tree196b8fdb07802d9a64ca8e0278906a1a9279c6fe /cpu/ppc4xx/serial.c
parenta6cccaea5a4743f4e4fb93a3ae9537e7357c783b (diff)
Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX base PrPMC board.
Diffstat (limited to 'cpu/ppc4xx/serial.c')
-rw-r--r--cpu/ppc4xx/serial.c25
1 files changed, 24 insertions, 1 deletions
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 6b0e39a58e..2c77338f21 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -271,9 +271,15 @@ int serial_tstc ()
#if defined(CONFIG_440)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#if defined(CONFIG_440_GX)
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#else
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
+#endif /* CONFIG_440_GX */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@@ -295,9 +301,17 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
+#if defined(CONFIG_440_GX)
+#define UART0_SDR sdr_uart1
+#define UART1_SDR sdr_uart0
+#endif /* CONFIG_440_GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
+#if defined(CONFIG_440_GX)
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#endif /* CONFIG_440_GX */
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
@@ -416,7 +430,12 @@ int serial_init (void)
unsigned long tmp;
#endif
+#if defined(CONFIG_440_GX)
+ mfsdr(UART0_SDR,reg);
+ reg &= ~CR0_MASK;
+#else
reg = mfdcr(cntrl0) & ~CR0_MASK;
+#endif /* CONFIG_440_GX */
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@@ -430,9 +449,13 @@ int serial_init (void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
+#if defined(CONFIG_440_GX)
+ reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
+ mtsdr (UART0_SDR,reg);
+#else
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
mtdcr (cntrl0, reg);
-
+#endif
out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */