summaryrefslogtreecommitdiff
path: root/cpu/mpc8xx
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:24:07 +0000
committerwdenk <wdenk>2002-11-03 00:24:07 +0000
commitc609719b8d1b2dca590e0ed499016d041203e403 (patch)
tree7ea1755d80903ff972f312a249eb856061d40e15 /cpu/mpc8xx
parent5b1d713721c3ea02549940133f09236783dda1f9 (diff)
Initial revision
Diffstat (limited to 'cpu/mpc8xx')
-rw-r--r--cpu/mpc8xx/cpu.c516
-rw-r--r--cpu/mpc8xx/fec.c710
-rw-r--r--cpu/mpc8xx/spi.c571
3 files changed, 1797 insertions, 0 deletions
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
new file mode 100644
index 00000000000..b1b58b089bf
--- /dev/null
+++ b/cpu/mpc8xx/cpu.c
@@ -0,0 +1,516 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * m8xx.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <asm/cache.h>
+
+static char *cpu_warning = "\n " \
+ "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
+
+#if ((defined(CONFIG_MPC860) || defined(CONFIG_MPC855)) && \
+ !defined(CONFIG_MPC862))
+# ifdef CONFIG_MPC855
+# define ID_STR "PC855"
+# else
+# define ID_STR "PC860"
+# endif
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 860 */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+ case 0x00020001: pre = 'p'; suf = ""; break;
+ case 0x00030001: suf = ""; break;
+ case 0x00120003: suf = "A"; break;
+ case 0x00130003: suf = "A3"; break;
+
+ case 0x00200004: suf = "B"; break;
+
+ case 0x00300004: suf = "C"; break;
+ case 0x00310004: suf = "C1"; m = 1;
+ break;
+
+ case 0x00200064: mid = "SR"; suf = "B"; break;
+ case 0x00300065: mid = "SR"; suf = "C"; break;
+ case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
+ case 0x05010000: suf = "D3"; m = 1; break;
+ case 0x05020000: suf = "D4"; m = 1; break;
+
+ /* this value is not documented anywhere */
+ case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+
+ default: suf = NULL; break;
+ }
+
+ if (suf)
+ printf ("%c" ID_STR "%sZPnn%s", pre, mid, suf);
+ else
+ printf ("unknown M" ID_STR " (0x%08x)", k);
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 860T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC862)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+
+ /* this value is not documented anywhere */
+ case 0x06000000: mid = "P"; suf = "0"; break;
+ case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
+ case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
+ default: suf = NULL; break;
+ }
+
+ if (suf)
+ printf ("%cPC862%sZPnn%s", pre, mid, suf);
+ else
+ printf ("unknown MPC862 (0x%08x)", k);
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 862T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC823)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+ /* MPC823 */
+ case 0x20000000: suf = "0"; break;
+ case 0x20010000: suf = "0.1"; break;
+ case 0x20020000: suf = "Z2/3"; break;
+ case 0x20020001: suf = "Z3"; break;
+ case 0x21000000: suf = "A"; break;
+ case 0x21010000: suf = "B"; m = 1; break;
+ case 0x21010001: suf = "B2"; m = 1; break;
+ /* MPC823E */
+ case 0x24010000: suf = NULL;
+ puts ("PPC823EZTnnB2");
+ m = 1;
+ break;
+ default:
+ suf = NULL;
+ printf ("unknown MPC823 (0x%08x)", k);
+ break;
+ }
+ if (suf)
+ printf ("PPC823ZTnn%s", suf);
+
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 860T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ puts (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC850)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ m = 0;
+
+ switch (k) {
+ case 0x20020001:
+ printf ("XPC850xxZT");
+ break;
+ case 0x21000065:
+ printf ("XPC850xxZTA");
+ break;
+ case 0x21010067:
+ printf ("XPC850xxZTB");
+ m = 1;
+ break;
+ case 0x21020068:
+ printf ("XPC850xxZTC");
+ m = 1;
+ break;
+ default:
+ printf ("unknown MPC850 (0x%08x)", k);
+ }
+ printf (" at %s MHz:", strmhz (buf, clock));
+
+ printf (" %u kB I-Cache", checkicache () >> 10);
+ printf (" %u kB D-Cache", checkdcache () >> 10);
+
+ /* lets check and see if we're running on a 850T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+#else
+#error CPU undefined
+#endif
+/* ------------------------------------------------------------------------- */
+
+int checkcpu (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong clock = gd->cpu_clk;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ uint pvr = get_pvr ();
+
+ puts ("CPU: ");
+
+ /* 850 has PARTNUM 20 */
+ /* 801 has PARTNUM 10 */
+ return check_CPU (clock, pvr, immr);
+}
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
+
+int checkicache (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_ic_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP860
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+ wr_ic_cst (IDC_DISABLE);
+ __asm__ volatile ("isync");
+
+ while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
+ wr_ic_adr (k);
+ wr_ic_cst (IDC_LDLCK);
+ __asm__ volatile ("isync");
+
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_ic_cst (IDC_ENABLE);
+ else
+ wr_ic_cst (IDC_DISABLE);
+
+ __asm__ volatile ("isync");
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
+/* call with cache disabled */
+
+int checkdcache (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_dc_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP860
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+ wr_dc_cst (IDC_DISABLE);
+
+ while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
+ wr_dc_adr (k);
+ wr_dc_cst (IDC_LDLCK);
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_dc_cst (IDC_ENABLE);
+ else
+ wr_dc_cst (IDC_DISABLE);
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+ uint i;
+ uint addr = 0;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ for (i = 0; i < size; i++) {
+ memctl->memc_mdr = table[i]; /* (16-15) */
+ memctl->memc_mcr = addr | upm; /* (16-16) */
+ addr++;
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc,
+ char *argv[])
+{
+ ulong msr, addr;
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ volatile ("mtspr 81, 0");
+ __asm__ volatile ("mfmsr %0":"=r" (msr));
+
+ msr &= ~0x1030;
+ __asm__ volatile ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CFG_RESET_ADDRESS
+ addr = CFG_RESET_ADDRESS;
+#else
+ /*
+ * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
+ * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CFG_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ * See table 15-5 pp. 15-16, and SCCR[RTSEL] pp. 15-27.
+ */
+unsigned long get_tbclk (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
+ ulong oscclk, factor;
+
+ if (immr->im_clkrst.car_sccr & SCCR_TBS) {
+ return (gd->cpu_clk / 16);
+ }
+
+ factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+
+ oscclk = gd->cpu_clk / factor;
+
+ if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ return (oscclk / 4);
+ }
+ return (oscclk / 16);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_8xx_watchdog ((immap_t *) CFG_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+
+void reset_8xx_watchdog (volatile immap_t * immr)
+{
+# if defined(CONFIG_LWMON)
+ /*
+ * The LWMON board uses a MAX6301 Watchdog
+ * with the trigger pin connected to port PA.7
+ *
+ * (The old board version used a MAX706TESA Watchdog, which
+ * had to be handled exactly the same.)
+ */
+# define WATCHDOG_BIT 0x0100
+ immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
+ immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
+ immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
+
+ immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
+# else
+ /*
+ * All other boards use the MPC8xx Internal Watchdog
+ */
+ immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
+ immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
+# endif /* CONFIG_LWMON */
+}
+
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
new file mode 100644
index 00000000000..d43dcaafdb6
--- /dev/null
+++ b/cpu/mpc8xx/fec.c
@@ -0,0 +1,710 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <commproc.h>
+#include <net.h>
+#include <command.h>
+
+#undef ET_DEBUG
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+
+#ifdef CFG_DISCOVER_PHY
+#include <miiphy.h>
+static void mii_discover_phy(void);
+#endif
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx = NULL;
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length);
+static int fec_recv(struct eth_device* dev);
+static int fec_init(struct eth_device* dev, bd_t * bd);
+static void fec_halt(struct eth_device* dev);
+
+int fec_initialize(bd_t *bis)
+{
+ struct eth_device* dev;
+
+ dev = (struct eth_device*) malloc(sizeof *dev);
+
+ sprintf(dev->name, "FEC ETHERNET");
+ dev->iobase = 0;
+ dev->priv = 0;
+ dev->init = fec_init;
+ dev->halt = fec_halt;
+ dev->send = fec_send;
+ dev->recv = fec_recv;
+
+ eth_register(dev);
+
+ return 1;
+}
+
+static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+{
+ int j, rc;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j>=TOUT_LOOP) {
+ printf("TX not ready\n");
+ }
+
+ rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
+ __asm__ ("eieio");
+
+ /* Activate transmit Buffer Descriptor polling */
+ fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
+
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+#if defined(CONFIG_ICU862)
+ udelay(10);
+#else
+ udelay(1);
+#endif
+ j++;
+ }
+ if (j>=TOUT_LOOP) {
+ printf("TX timeout\n");
+ }
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
+ __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
+ (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
+#endif
+ /* return only status bits */;
+ rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+ return rc;
+}
+
+static int fec_recv(struct eth_device* dev)
+{
+ int length;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+ printf("%s[%d] err: %x\n",
+ __FUNCTION__,__LINE__,rtx->rxbd[rxIdx].cbd_sc);
+#endif
+ } else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive(NetRxPackets[rxIdx], length - 4);
+ }
+
+ /* Give the buffer back to the FEC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+ __asm__ ("eieio");
+
+ /* Try to fill Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+ }
+
+ return length;
+}
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+#define FEC_RESET_DELAY 50
+
+static int fec_init(struct eth_device* dev, bd_t * bd)
+{
+
+ int i;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+
+#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T)
+ /* configure FADS for fast (FEC) ethernet, half-duplex */
+ /* The LXT970 needs about 50ms to recover from reset, so
+ * wait for it by discovering the PHY before leaving eth_init().
+ */
+ {
+ volatile uint *bcsr4 = (volatile uint *) BCSR4;
+ *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
+ | (BCSR4_FETHCFG0 | BCSR4_FETHFDE | BCSR4_FETHRST);
+
+ /* reset the LXT970 PHY */
+ *bcsr4 &= ~BCSR4_FETHRST;
+ udelay (10);
+ *bcsr4 |= BCSR4_FETHRST;
+ udelay (10);
+ }
+#endif
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf ("FEC_RESET_DELAY timeout\n");
+ return 0;
+ }
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt
+ */
+ fecp->fec_ievent = 0xffc0;
+
+ /* No need to set the IVEC register */
+
+ /* Set station address
+ */
+#define ea eth_get_dev()->enetaddr
+ fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
+ (ea[2] << 8) | (ea[3] ) ;
+ fecp->fec_addr_high = (ea[4] << 8) | (ea[5] ) ;
+#undef ea
+
+ /* Clear multicast address hash table
+ */
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+
+ /* Set maximum receive buffer size.
+ */
+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+
+ /* Set maximum frame length
+ */
+ fecp->fec_r_hash = PKT_MAXBUF_SIZE;
+
+ /*
+ * Setup Buffers and Buffer Desriptors
+ */
+ rxIdx = 0;
+ txIdx = 0;
+
+ if (!rtx) {
+#ifdef CFG_ALLOC_DPRAM
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + dpram_alloc_align(sizeof(RTXBD),8));
+#else
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
+#endif
+ }
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Last, Tx CRC
+ */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* Set receive and transmit descriptor base
+ */
+ fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
+ fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
+
+ /* Enable MII mode
+ */
+#if 0 /* Full duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
+ fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
+#else /* Half duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl = 0;
+#endif
+
+ /* Enable big endian and don't care about SDMA FC.
+ */
+ fecp->fec_fun_code = 0x78000000;
+
+ /* Set MII speed to 2.5 MHz or slightly below.
+ * According to the MPC860T (Rev. D) Fast ethernet controller user
+ * manual (6.2.14),
+ * the MII management interface clock must be less than or equal
+ * to 2.5 MHz.
+ * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+ * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+ */
+ fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+
+#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+ /* Configure all of port D for MII.
+ */
+ immr->im_ioport.iop_pdpar = 0x1fff;
+
+ /* Bits moved from Rev. D onward */
+ if ((get_immr (0) & 0xffff) < 0x0501) {
+ immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
+ } else {
+ immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
+ }
+#else
+ /* Configure port A for MII.
+ */
+
+#if defined(CONFIG_ICU862) && defined(CFG_DISCOVER_PHY)
+
+ /* On the ICU862 board the MII-MDC pin is routed to PD8 pin
+ * of CPU, so for this board we need to configure Utopia and
+ * enable PD8 to MII-MDC function */
+ immr->im_ioport.iop_pdpar |= 0x4080;
+#endif
+
+ /* Has Utopia been configured? */
+ if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
+ /*
+ * YES - Use MUXED mode for UTOPIA bus.
+ * This frees Port A for use by MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode &= ~0x80;
+ } else {
+ /*
+ * NO - set SPLIT mode for UTOPIA bus.
+ *
+ * This doesn't really effect UTOPIA (which isn't
+ * enabled anyway) but just tells the 862
+ * to use port A for MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode |= 0x80;
+ }
+#endif /* !defined(CONFIG_ICU862) */
+
+ rxIdx = 0;
+ txIdx = 0;
+
+ /* Now enable the transmit and receive processing
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+
+#ifdef CFG_DISCOVER_PHY
+ /* wait for the PHY to wake up after reset
+ */
+ mii_discover_phy();
+#endif
+
+ /* And last, try to fill Rx Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+
+ return 1;
+}
+
+
+
+static void fec_halt(struct eth_device* dev)
+{
+#if 0
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#if 0
+void restart(void)
+{
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+#endif
+
+#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
+
+static int phyaddr = -1; /* didn't find a PHY yet */
+static uint phytype;
+
+/* Make MII read/write commands for the FEC.
+*/
+
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
+
+/* PHY identification
+ */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+
+
+/* send command to phy using mii, wait for result */
+static uint
+mii_send(uint mii_cmd)
+{
+ uint mii_reply;
+ volatile fec_t *ep;
+
+ ep = &(((immap_t *)CFG_IMMR)->im_cpm.cp_fec);
+
+ ep->fec_mii_data = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->fec_ievent & FEC_ENET_MII))
+ ; /* spin until done */
+ mii_reply = ep->fec_mii_data; /* result from phy */
+ ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
+#if 0
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
+#endif
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+static void
+mii_discover_phy(void)
+{
+#define MAX_PHY_PASSES 11
+ uint phyno;
+ int pass;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type ", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |= mii_send(mk_mii_read(phyno,
+ PHY_PHYIDR2));
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ",phyno,pass);
+ switch (phytype & 0xfffffff0) {
+ case PHY_ID_LXT970:
+ printf("LXT970\n");
+ break;
+ case PHY_ID_LXT971:
+ printf("LXT971\n");
+ break;
+ case PHY_ID_82555:
+ printf("82555\n");
+ break;
+ case PHY_ID_QS6612:
+ printf("QS6612\n");
+ break;
+ case PHY_ID_AMD79C784:
+ printf("AMD79C784\n");
+ break;
+ case PHY_ID_LSI80225B:
+ printf("LSI L80225/B\n");
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0) {
+ printf("No PHY device found.\n");
+ }
+}
+#endif /* CFG_DISCOVER_PHY */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
+
+static int mii_init_done = 0;
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ bd_t *bd = gd->bd;
+
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
+ int i;
+
+ if (mii_init_done != 0) {
+ return;
+ }
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf ("FEC_RESET_DELAY timeout\n");
+ return;
+ }
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt
+ */
+ fecp->fec_ievent = 0xffc0;
+
+ /* Set MII speed to 2.5 MHz or slightly below.
+ * According to the MPC860T (Rev. D) Fast ethernet controller user
+ * manual (6.2.14),
+ * the MII management interface clock must be less than or equal
+ * to 2.5 MHz.
+ * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+ * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+ */
+ fecp->fec_mii_speed = ((bd->bi_busfreq + 4999999) / 5000000) << 1;
+
+#if !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+ /* Configure all of port D for MII.
+ */
+ immr->im_ioport.iop_pdpar = 0x1fff;
+
+ /* Bits moved from Rev. D onward */
+ if ((get_immr (0) & 0xffff) < 0x0501) {
+ immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
+ } else {
+ immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
+ }
+#else
+ /* Configure port A for MII.
+ */
+
+#if defined(CONFIG_ICU862)
+
+ /* On the ICU862 board the MII-MDC pin is routed to PD8 pin
+ * of CPU, so for this board we need to configure Utopia and
+ * enable PD8 to MII-MDC function */
+ immr->im_ioport.iop_pdpar |= 0x4080;
+#endif
+
+ /* Has Utopia been configured? */
+ if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
+ /*
+ * YES - Use MUXED mode for UTOPIA bus.
+ * This frees Port A for use by MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode &= ~0x80;
+ } else {
+ /*
+ * NO - set SPLIT mode for UTOPIA bus.
+ *
+ * This doesn't really effect UTOPIA (which isn't
+ * enabled anyway) but just tells the 862
+ * to use port A for MII (see 862UM table 41-6).
+ */
+ immr->im_ioport.utmode |= 0x80;
+ }
+#endif /* !defined(CONFIG_ICU862) */
+ /* Now enable the transmit and receive processing
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+
+ mii_init_done = 1;
+}
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)*/
+
+#endif /* CFG_CMD_NET, FEC_ENET */
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
new file mode 100644
index 00000000000..f04d88e34e4
--- /dev/null
+++ b/cpu/mpc8xx/spi.c
@@ -0,0 +1,571 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ * <nboppuri@trinetcommunication.com>,
+ * <pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if (defined(CONFIG_SPI)) || (CONFIG_POST & CFG_POST_SPI)
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef DEBUG
+
+#define SPI_EEPROM_WREN 0x06
+#define SPI_EEPROM_RDSR 0x05
+#define SPI_EEPROM_READ 0x03
+#define SPI_EEPROM_WRITE 0x02
+
+/* ---------------------------------------------------------------
+ * Offset for initial SPI buffers in DPRAM:
+ * We need a 520 byte scratch DPRAM area to use at an early stage.
+ * It is used between the two initialization calls (spi_init_f()
+ * and spi_init_r()).
+ * The value 0xb00 makes it far enough from the start of the data
+ * area (as well as from the stack pointer).
+ * --------------------------------------------------------------- */
+#ifndef CFG_SPI_INIT_OFFSET
+#define CFG_SPI_INIT_OFFSET 0xB00
+#endif
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+
+#endif /* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+#define MAX_BUFFER 0x104
+
+/* ----------------------------------------------------------------------
+ * Initially we place the RX and TX buffers at a fixed location in DPRAM!
+ * ---------------------------------------------------------------------- */
+static uchar *rxbuf =
+ (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
+ [CFG_SPI_INIT_OFFSET];
+static uchar *txbuf =
+ (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
+ [CFG_SPI_INIT_OFFSET+MAX_BUFFER];
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_f (void)
+{
+ unsigned int dpaddr;
+
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cpic8xx_t *cpi;
+ volatile cpm8xx_t *cp;
+ volatile iop8xx_t *iop;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CFG_IMMR;
+ cpi = (cpic8xx_t *)&immr->im_cpic;
+ iop = (iop8xx_t *) &immr->im_ioport;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+/* 1 */
+ /* ------------------------------------------------
+ * Initialize Port B SPI pins -> page 34-8 MPC860UM
+ * (we are only in Master Mode !)
+ * ------------------------------------------------ */
+
+ /* --------------------------------------------
+ * GPIO or per. Function
+ * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
+ * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
+ * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
+ * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
+ * -------------------------------------------- */
+ cp->cp_pbpar |= 0x0000000E; /* set bits */
+ cp->cp_pbpar &= ~0x00000001; /* reset bit */
+
+ /* ----------------------------------------------
+ * In/Out or per. Function 0/1
+ * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
+ * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
+ * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
+ * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
+ * ---------------------------------------------- */
+ cp->cp_pbdir |= 0x0000000F;
+
+ /* ----------------------------------------------
+ * open drain or active output
+ * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
+ * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
+ * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
+ * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
+ * ---------------------------------------------- */
+
+ cp->cp_pbodr |= 0x00000008;
+ cp->cp_pbodr &= ~0x00000007;
+
+ /* Initialize the parameter ram.
+ * We need to make sure many things are initialized to zero
+ */
+ spi->spi_rstate = 0;
+ spi->spi_rdp = 0;
+ spi->spi_rbptr = 0;
+ spi->spi_rbc = 0;
+ spi->spi_rxtmp = 0;
+ spi->spi_tstate = 0;
+ spi->spi_tdp = 0;
+ spi->spi_tbptr = 0;
+ spi->spi_tbc = 0;
+ spi->spi_txtmp = 0;
+
+ /* Allocate space for one transmit and one receive buffer
+ * descriptor in the DP ram
+ */
+#ifdef CFG_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
+#else
+ dpaddr = CPM_SPI_BASE;
+#endif
+
+/* 3 */
+ /* Set up the SPI parameters in the parameter ram */
+ spi->spi_rbase = dpaddr;
+ spi->spi_tbase = dpaddr + sizeof (cbd_t);
+
+ /***********IMPORTANT******************/
+
+ /*
+ * Setting transmit and receive buffer descriptor pointers
+ * initially to rbase and tbase. Only the microcode patches
+ * documentation talks about initializing this pointer. This
+ * is missing from the sample I2C driver. If you dont
+ * initialize these pointers, the kernel hangs.
+ */
+ spi->spi_rbptr = spi->spi_rbase;
+ spi->spi_tbptr = spi->spi_tbase;
+
+/* 4 */
+#ifdef CFG_SPI_UCODE_PATCH
+ /*
+ * Initialize required parameters if using microcode patch.
+ */
+ spi->spi_rstate = 0;
+ spi->spi_tstate = 0;
+#else
+ /* Init SPI Tx + Rx Parameters */
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ ;
+#endif /* CFG_SPI_UCODE_PATCH */
+
+/* 5 */
+ /* Set SDMA configuration register */
+ immr->im_siu_conf.sc_sdcr = 0x0001;
+
+/* 6 */
+ /* Set to big endian. */
+ spi->spi_tfcr = SMC_EB;
+ spi->spi_rfcr = SMC_EB;
+
+/* 7 */
+ /* Set maximum receive size. */
+ spi->spi_mrblr = MAX_BUFFER;
+
+/* 8 + 9 */
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ tbdf->cbd_sc &= ~BD_SC_READY;
+ rbdf->cbd_sc &= ~BD_SC_EMPTY;
+
+ /* Set the bd's rx and tx buffer address pointers */
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+/* 10 + 11 */
+ cp->cp_spim = 0; /* Mask all SPI events */
+ cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
+
+ return;
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ *
+ * Description: Init SPI-Controller (RAM part) -
+ * The malloc engine is ready and we can move our buffers to
+ * normal RAM
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+ volatile cpm8xx_t *cp;
+ volatile spi_t *spi;
+ volatile immap_t *immr;
+ volatile cbd_t *tbdf, *rbdf;
+
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+ /* tx and rx buffer descriptors */
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ /* Allocate memory for RX and TX buffers */
+ rxbuf = (uchar *) malloc (MAX_BUFFER);
+ txbuf = (uchar *) malloc (MAX_BUFFER);
+
+ rbdf->cbd_bufaddr = (ulong) rxbuf;
+ tbdf->cbd_bufaddr = (ulong) txbuf;
+
+ return;
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ *txbuf = SPI_EEPROM_WREN; /* write enable */
+ spi_xfer(1);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
+ memcpy(alen + txbuf, buffer, len);
+ spi_xfer(alen + len);
+ /* ignore received data */
+ for (i = 0; i < 1000; i++) {
+ *txbuf = SPI_EEPROM_RDSR; /* read status */
+ txbuf[1] = 0;
+ spi_xfer(2);
+ if (!(rxbuf[1] & 1)) {
+ break;
+ }
+ udelay(1000);
+ }
+ if (i >= 1000) {
+ printf ("*** spi_write: Time out while writing!\n");
+ }
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ memset(rxbuf, 0, MAX_BUFFER);
+ memset(txbuf, 0, MAX_BUFFER);
+ memcpy(txbuf, addr, alen);
+ *txbuf = SPI_EEPROM_READ; /* READ memory array */
+
+ /*
+ * There is a bug in 860T (?) that cuts the last byte of input
+ * if we're reading into DPRAM. The solution we choose here is
+ * to always read len+1 bytes (we have one extra byte at the
+ * end of the buffer).
+ */
+ spi_xfer(alen + len + 1);
+ memcpy(buffer, alen + rxbuf, len);
+
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+ volatile immap_t *immr;
+ volatile cpm8xx_t *cp;
+ volatile spi_t *spi;
+ cbd_t *tbdf, *rbdf;
+ ushort loop;
+ int tm;
+
+ DPRINT (("*** spi_xfer entered ***\n"));
+
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CFG_SPI_UCODE_PATCH
+ spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+ spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+ /* Disable relocation */
+ spi->spi_rpbase = 0;
+#endif
+
+ tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+ rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+ /* Set CS for device */
+ cp->cp_pbdat &= ~0x0001;
+
+ /* Setting tx bd status and data length */
+ tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
+ tbdf->cbd_datlen = count;
+
+ DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
+ tbdf->cbd_datlen));
+
+ /* Setting rx bd status and data length */
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+ rbdf->cbd_datlen = 0; /* rx length has no significance */
+
+ loop = cp->cp_spmode & SPMODE_LOOP;
+ cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
+ loop |
+ SPMODE_REV |
+ SPMODE_MSTR |
+ SPMODE_EN |
+ SPMODE_LEN(8) | /* 8 Bits per char */
+ SPMODE_PM(0x8) ; /* medium speed */
+ cp->cp_spim = 0; /* Mask all SPI events */
+ cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
+
+ /* start spi transfer */
+ DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+ cp->cp_spcom |= SPI_STR; /* Start transmit */
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * -------------------------------- */
+ for (tm=0; tm<1000; ++tm) {
+ if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
+ DPRINT (("*** spi_xfer: Tx buffer empty\n"));
+ break;
+ }
+ if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
+ DPRINT (("*** spi_xfer: Tx BD done\n"));
+ break;
+ }
+ udelay (1000);
+ }
+ if (tm >= 1000) {
+ printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+ }
+ DPRINT (("*** spi_xfer: ... transfer ended\n"));
+
+#ifdef DEBUG
+ printf ("\nspi_xfer: txbuf after xfer\n");
+ memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
+ printf ("spi_xfer: rxbuf after xfer\n");
+ memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
+ printf ("\n");
+#endif
+
+ /* Clear CS for device */
+ cp->cp_pbdat |= 0x0001;
+
+ return count;
+}
+#endif /* CONFIG_SPI || (CONFIG_POST & CFG_POST_SPI) */
+
+/*
+ * SPI test
+ *
+ * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
+ * The interface is configured accordingly and several packets
+ * are transfered. The configurable test parameters are:
+ * TEST_MIN_LENGTH - minimum size of packet to transfer
+ * TEST_MAX_LENGTH - maximum size of packet to transfer
+ * TEST_NUM - number of tests
+ */
+
+#if CONFIG_POST & CFG_POST_SPI
+
+#define TEST_MIN_LENGTH 1
+#define TEST_MAX_LENGTH MAX_BUFFER
+#define TEST_NUM 1
+
+static void packet_fill (char * packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 0; i < length; i++)
+ {
+ packet[i] = c++;
+ }
+}
+
+static int packet_check (char * packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 0; i < length; i++)
+ {
+ if (packet[i] != c++) return -1;
+ }
+
+ return 0;
+}
+
+int spi_post_test (int flags)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int res = -1;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = (cpm8xx_t *) &immr->im_cpm;
+ int i;
+ int l;
+
+ spi_init_f();
+ spi_init_r();
+
+ cp->cp_spmode |= SPMODE_LOOP;
+
+ for (i = 0; i < TEST_NUM; i++)
+ {
+ for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8)
+ {
+ packet_fill(txbuf, l);
+
+ spi_xfer(l);
+
+ if (packet_check(rxbuf, l) < 0)
+ {
+ goto Done;
+ }
+ }
+ }
+
+ res = 0;
+
+ Done:
+
+ cp->cp_spmode &= ~SPMODE_LOOP;
+
+ /*
+ * SCC2 Ethernet parameter RAM space overlaps
+ * the SPI parameter RAM space. So we need to restore
+ * the SCC2 configuration if it is used by UART or Ethernet.
+ */
+
+#if defined(CONFIG_8xx_CONS_SCC2)
+ serial_init();
+#endif
+
+#if defined(SCC_ENET) && (SCC_ENET == 1)
+ eth_init(gd->bd);
+#endif
+
+ if (res != 0)
+ {
+ post_log("SPI test failed\n");
+ }
+
+ return res;
+}
+#endif /* CONFIG_POST & CFG_POST_SPI */