summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx/cpu.c
diff options
context:
space:
mode:
authorTrent Piepho <tpiepho@freescale.com>2008-12-03 15:16:37 -0800
committerAndrew Fleming-AFLEMING <afleming@freescale.com>2008-12-19 18:32:49 -0600
commitada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28 (patch)
treef4e5c4ef83b76a3480502b249b955a5032d6e600 /cpu/mpc85xx/cpu.c
parent9863d6aca11405e1e0d8aba2045d78aeec4d4ee7 (diff)
mpc8[56]xx: Put localbus clock in sysinfo and gd
Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
Diffstat (limited to 'cpu/mpc85xx/cpu.c')
-rw-r--r--cpu/mpc85xx/cpu.c31
1 files changed, 5 insertions, 26 deletions
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 89800b8844..15ba7f1c5e 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver)
int checkcpu (void)
{
sys_info_t sysinfo;
- uint lcrr; /* local bus clock ratio register */
- uint clkdiv; /* clock divider portion of lcrr */
uint pvr, svr;
uint fam;
uint ver;
@@ -165,30 +163,11 @@ int checkcpu (void)
break;
}
-#if defined(CONFIG_SYS_LBC_LCRR)
- lcrr = CONFIG_SYS_LBC_LCRR;
-#else
- {
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
- lcrr = lbc->lcrr;
- }
-#endif
- clkdiv = lcrr & LCRR_CLKDIV;
- if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
- !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- clkdiv *= 2;
-#endif
- printf("LBC:%-4s MHz\n",
- strmhz(buf1, sysinfo.freqSystemBus / clkdiv));
- } else {
- printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr);
- }
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV)
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ else
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freqLocalBus);
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));