summaryrefslogtreecommitdiff
path: root/cpu/arm_cortexa8/omap3
diff options
context:
space:
mode:
authorTom Rix <Tom.Rix@windriver.com>2009-09-10 15:27:57 -0400
committerTom Rix <Tom.Rix@windriver.com>2009-10-13 06:17:33 -0500
commit7a2aa8b68120f333ed2edc33475ca195810d6cb1 (patch)
tree90d5ca33c5e1464bda6f439e4b1f04d164b78d16 /cpu/arm_cortexa8/omap3
parenta16df2c11188297eca43cf6080c70fb69b960232 (diff)
OMAP3 Move cache routine to cache.S
v7_flush_dcache_all, because it depends on omap ROM code is not generic. Rename the function to 'invalidate_dcache' and move it to the omap cpu directory. Collect the other omap cache routines l2_cache_enable and l2_cache_disable with invalide_dcache into cache.S. This means removing the old cache.c file that contained l2_cache_enable and l2_cache_disable. The conversion from cache.c to cache.S was done most through disassembling the uboot binary. The only significant change was to change the comparision for the return of get_cpu_rev from cmp r0, #0 beq earlier_than_label Which was lost information to cmp r0, #CPU_3XX_ES20 blt earlier_than_label The paths through the enable routine were verified by adding an infinite loop and seeing the hang. Then removing the infinite loop and seeing it continue. The disable routine is similar enough that it was not tested with this method. Run tested by cold booting from nand on beagle and zoom1. Compile tested on MAKEALL arm. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Diffstat (limited to 'cpu/arm_cortexa8/omap3')
-rw-r--r--cpu/arm_cortexa8/omap3/Makefile2
-rw-r--r--cpu/arm_cortexa8/omap3/board.c2
-rw-r--r--cpu/arm_cortexa8/omap3/cache.S191
-rw-r--r--cpu/arm_cortexa8/omap3/cache.c95
4 files changed, 193 insertions, 97 deletions
diff --git a/cpu/arm_cortexa8/omap3/Makefile b/cpu/arm_cortexa8/omap3/Makefile
index eef165c334..136b163ad7 100644
--- a/cpu/arm_cortexa8/omap3/Makefile
+++ b/cpu/arm_cortexa8/omap3/Makefile
@@ -26,10 +26,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
SOBJS := lowlevel_init.o
+SOBJS += cache.o
SOBJS += reset.o
COBJS += board.o
-COBJS += cache.o
COBJS += clock.o
COBJS += gpio.o
COBJS += mem.o
diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
index b8bd0524af..dd2c94073b 100644
--- a/cpu/arm_cortexa8/omap3/board.c
+++ b/cpu/arm_cortexa8/omap3/board.c
@@ -201,7 +201,7 @@ void s_init(void)
* Right now flushing at low MPU speed.
* Need to move after clock init
*/
- v7_flush_dcache_all(get_device_type());
+ invalidate_dcache(get_device_type());
#ifndef CONFIG_ICACHE_OFF
icache_enable();
#endif
diff --git a/cpu/arm_cortexa8/omap3/cache.S b/cpu/arm_cortexa8/omap3/cache.S
new file mode 100644
index 0000000000..0f63815359
--- /dev/null
+++ b/cpu/arm_cortexa8/omap3/cache.S
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This file is based on and replaces the existing cache.c file
+ * The copyrights for the cache.c file are:
+ *
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/omap3.h>
+
+/*
+ * omap3 cache code
+ */
+
+.align 5
+.global invalidate_dcache
+.global l2_cache_enable
+.global l2_cache_disable
+
+/*
+ * invalidate_dcache()
+ *
+ * Invalidate the whole D-cache.
+ *
+ * Corrupted registers: r0-r5, r7, r9-r11
+ *
+ * - mm - mm_struct describing address space
+ */
+invalidate_dcache:
+ stmfd r13!, {r0 - r5, r7, r9 - r12, r14}
+
+ mov r7, r0 @ take a backup of device type
+ cmp r0, #0x3 @ check if the device type is
+ @ GP
+ moveq r12, #0x1 @ set up to invalide L2
+smi: .word 0x01600070 @ Call SMI monitor (smieq)
+ cmp r7, #0x3 @ compare again in case its
+ @ lost
+ beq finished_inval @ if GP device, inval done
+ @ above
+
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq finished_inval @ if loc is 0, then no need to
+ @ clean
+ mov r10, #0 @ start clean at cache level 0
+inval_loop1:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache
+ @ level
+ mov r1, r0, lsr r2 @ extract cache type bits from
+ @ clidr
+ and r1, r1, #7 @ mask of the bits for current
+ @ cache only
+ cmp r1, #2 @ see what cache we have at
+ @ this level
+ blt skip_inval @ skip if no cache, or just
+ @ i-cache
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level
+ @ in cssr
+ mov r2, #0 @ operand for mcr SBZ
+ mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to
+ @ sych the new cssr&csidr,
+ @ with armv7 this is 'isb',
+ @ but we compile with armv5
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ and r2, r1, #7 @ extract the length of the
+ @ cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the
+ @ way size
+ clz r5, r4 @ find bit position of way
+ @ size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the
+ @ index size
+inval_loop2:
+ mov r9, r4 @ create working copy of max
+ @ way size
+inval_loop3:
+ orr r11, r10, r9, lsl r5 @ factor way and cache number
+ @ into r11
+ orr r11, r11, r7, lsl r2 @ factor index number into r11
+ mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way
+ subs r9, r9, #1 @ decrement the way
+ bge inval_loop3
+ subs r7, r7, #1 @ decrement the index
+ bge inval_loop2
+skip_inval:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt inval_loop1
+finished_inval:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level
+ @ in cssr
+ mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer,
+ @ with armv7 this is 'isb',
+ @ but we compile with armv5
+
+ ldmfd r13!, {r0 - r5, r7, r9 - r12, pc}
+
+
+l2_cache_enable:
+ push {r0, r1, r2, lr}
+ @ ES2 onwards we can disable/enable L2 ourselves
+ bl get_cpu_rev
+ cmp r0, #CPU_3XX_ES20
+ blt l2_cache_disable_EARLIER_THAN_ES2
+ mrc 15, 0, r3, cr1, cr0, 1
+ orr r3, r3, #2
+ mcr 15, 0, r3, cr1, cr0, 1
+ b l2_cache_enable_END
+l2_cache_enable_EARLIER_THAN_ES2:
+ @ Save r0, r12 and restore them after usage
+ mov r3, ip
+ str r3, [sp, #4]
+ mov r3, r0
+ @
+ @ GP Device ROM code API usage here
+ @ r12 = AUXCR Write function and r0 value
+ @
+ mov ip, #3
+ mrc 15, 0, r0, cr1, cr0, 1
+ orr r0, r0, #2
+ @ SMI instruction to call ROM Code API
+ .word 0xe1600070
+ mov r0, r3
+ mov ip, r3
+ str r3, [sp, #4]
+l2_cache_enable_END:
+ pop {r1, r2, r3, pc}
+
+
+l2_cache_disable:
+ push {r0, r1, r2, lr}
+ @ ES2 onwards we can disable/enable L2 ourselves
+ bl get_cpu_rev
+ cmp r0, #CPU_3XX_ES20
+ blt l2_cache_disable_EARLIER_THAN_ES2
+ mrc 15, 0, r3, cr1, cr0, 1
+ bic r3, r3, #2
+ mcr 15, 0, r3, cr1, cr0, 1
+ b l2_cache_disable_END
+l2_cache_disable_EARLIER_THAN_ES2:
+ @ Save r0, r12 and restore them after usage
+ mov r3, ip
+ str r3, [sp, #4]
+ mov r3, r0
+ @
+ @ GP Device ROM code API usage here
+ @ r12 = AUXCR Write function and r0 value
+ @
+ mov ip, #3
+ mrc 15, 0, r0, cr1, cr0, 1
+ bic r0, r0, #2
+ @ SMI instruction to call ROM Code API
+ .word 0xe1600070
+ mov r0, r3
+ mov ip, r3
+ str r3, [sp, #4]
+l2_cache_disable_END:
+ pop {r1, r2, r3, pc}
diff --git a/cpu/arm_cortexa8/omap3/cache.c b/cpu/arm_cortexa8/omap3/cache.c
deleted file mode 100644
index 0d5b444be1..0000000000
--- a/cpu/arm_cortexa8/omap3/cache.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * (C) Copyright 2008 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * omap3 L2 cache code
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/cache.h>
-
-void l2_cache_enable(void)
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() >= CPU_3XX_ES20) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("orr r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-
-}
-
-void l2_cache_disable(void)
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() >= CPU_3XX_ES20) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("bic r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-}