diff options
author | Sjoerd Simons <sjoerd.simons@collabora.co.uk> | 2019-06-04 15:49:57 +0200 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2019-06-11 10:43:00 +0200 |
commit | aa3fba9753d6def6a144054b0279588e1fdec573 (patch) | |
tree | 490f04af0295fb68266c1ca09f0a96ef564b4024 /configs/mx6sabreauto_defconfig | |
parent | c4a434677585320381b56096457ff8db5fe5ee84 (diff) |
mx6sabreauto: set SYS_MALLOC_F for video
Sabre Auto boards currently hang with:
```
U-Boot 2019.07-rc3-00057-gc41940c406 (Jun 03 2019 - 14:42:41 +0200)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
CPU: Automotive temperature grade (-40C to 125C)Reset cause: WDOG
Model: Freescale i.MX6 Quad Plus SABRE Automotive Board
Board: MX6Q-Sabreauto revA
I2C: ready
DRAM: 2 GiB
Video device 'ipu@2400000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Video device 'ipu@2800000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Some drivers failed to bind
Error binding driver 'generic_simple_bus': -28
Some drivers failed to bind
initcall sequence 8ffe00b8 failed at call 1780e93b (err=-28)
```
Set SYS_MALLOC_F_LEN to reserve_video to work.
This is similar to the change Peng Fan did for mx6sabresd (9002e735e717)
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'configs/mx6sabreauto_defconfig')
-rw-r--r-- | configs/mx6sabreauto_defconfig | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index ef965a30e66..dc758d7aafd 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_TARGET_MX6SABREAUTO=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y @@ -11,7 +12,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_NXP_BOARD_REVISION=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y |