MLK-20945-7 imx8qm/qxp: Add MEK FSPI configurations

Add MEK FSPI configs to enable SPL SPI and NOR support for flexspi booting

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit f303f969ebb0f525c413c47519725275d00025a1)
(cherry picked from commit b6c7ad55b757be56d454f0d64667c7547e3690dc)
(cherry picked from commit 8043244218c1c0391655b8f2c3f3b08bed741f0f)
(cherry picked from commit 8768765e5829ecdd8d7e8ee1d8c60abaf67528fb)

1 files changed, 153 insertions, 0 deletions

diff --git a/configs/imx8qm_mek_fspi_defconfig b/configs/imx8qm_mek_fspi_defconfig
new file mode 100644
index 0000000000..be42e9f6ec
--- /dev/null
+++ b/configs/imx8qm_mek_fspi_defconfig
@@ -0,0 +1,153 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SYS_MALLOC_LEN=0x2400000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SYS_MEMTEST_START=0xA0000000
+CONFIG_SYS_MEMTEST_END=0xB0000000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=4
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x400000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_TARGET_IMX8QM_MEK=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_SPI_FLASH_TINY=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x200000
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_EFI_PARTITION=n
+CONFIG_SPL_DOS_PARTITION=n
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_SPL_ENV_IS_NOWHERE=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_PANIC_HANG=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
+CONFIG_LOG=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SYS_MALLOC_SIMPLE is not set
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC_SHARE_MDIO=y
+CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_EFI_LOADER is not set
+
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_MEMTEST=y
+
+CONFIG_IMX_BOOTAUX=y
+
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SCU_THERMAL=y
+CONFIG_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_CMD_SF=y
+CONFIG_SF_DEFAULT_BUS=0
+CONFIG_SF_DEFAULT_CS=0
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SF_DEFAULT_MODE=0
+
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_IMX8=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TCPC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_CDNS3_USB_PHY=y
+CONFIG_PHY=y