LFU-297: configs: rename the i.MX8DXL ddr3 config files

rename the i.MX8DXL ddr3 config files to ddr3l and change kernel
dtb name

Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d8c3da614b3d6cfc3750b276b0ab994a56bef074)

1 files changed, 184 insertions, 0 deletions

diff --git a/configs/imx8dxl_ddr3l_evk_nand_defconfig b/configs/imx8dxl_ddr3l_evk_nand_defconfig
new file mode 100644
index 0000000000..7b99cb213c
--- /dev/null
+++ b/configs/imx8dxl_ddr3l_evk_nand_defconfig
@@ -0,0 +1,184 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SYS_MALLOC_LEN=0x2400000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SYS_MEMTEST_START=0xA0000000
+CONFIG_SYS_MEMTEST_END=0xB0000000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=4
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x7800000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8dxl-ddr3l-evk"
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_TARGET_IMX8DXL_DDR3_EVK=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_DMA=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_PANIC_HANG=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8dxl_evk/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read ${loadaddr} 0x9000000 0x2000000; nand read ${fdt_addr} 0xB000000 0x100000; booti ${loadaddr} - ${fdt_addr}"
+CONFIG_LOG=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SYS_MALLOC_SIMPLE is not set
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_FSL_USDHC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_MII=y
+
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_EFI_LOADER is not set
+
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_MEMTEST=y
+
+CONFIG_IMX_BOOTAUX=y
+
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SCU_THERMAL=y
+
+CONFIG_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_CMD_SF=y
+CONFIG_SF_DEFAULT_BUS=0
+CONFIG_SF_DEFAULT_CS=0
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SF_DEFAULT_MODE=0
+
+CONFIG_USB_EHCI_HCD=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
+
+CONFIG_NAND_BOOT=y
+CONFIG_CMD_UBI=y
+
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
+CONFIG_NAND_MXS_DT=y
+CONFIG_NAND_MXS_USE_MINIMUM_ECC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
+CONFIG_MTDPARTS_SKIP_INVALID=y
+
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_CMD_FASTBOOT=y
+CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82800000
+CONFIG_FASTBOOT_BUF_SIZE=0x40000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_USB_DEV=0
+
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_PCI=y
+
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_SPL_DM_USB=y
+CONFIG_SPL_SDP_USB_DEV=0
+CONFIG_SDP_LOADADDR=0x80400000
+CONFIG_USB_PORT_AUTO=y
+
+CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
+CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
+CONFIG_IMX_SNVS_SEC_SC=y
+CONFIG_CMD_RNG=y
+CONFIG_DM_RNG=y
+CONFIG_FSL_CAAM_RNG=y