diff options
author | Jagan Teki <jagannadh.teki@gmail.com> | 2018-02-20 12:46:28 +0530 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2018-02-22 14:51:01 +0100 |
commit | 3d409153502f25a1ea3b8b4e9940148b7871273d (patch) | |
tree | 72d9b263935c8c301121d030d1a3309a7fb3e4cf /configs/imx6q_icore_nand_defconfig | |
parent | ac738a4a7b22322bbf84948da8f6e8a0bcd45d12 (diff) |
imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
Currently SPL_LOAD_FIT is unable to boot from nand on
i.MX6QDL platform, so enable only for MMC boards.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'configs/imx6q_icore_nand_defconfig')
-rw-r--r-- | configs/imx6q_icore_nand_defconfig | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig new file mode 100644 index 00000000000..034e17479e7 --- /dev/null +++ b/configs/imx6q_icore_nand_defconfig @@ -0,0 +1,47 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_MX6Q_ENGICAM=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +# CONFIG_CMD_BMODE is not set +CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore" +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_SPL=y +CONFIG_SPL_DMA_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" +CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)" +CONFIG_CMD_UBI=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_SYS_I2C_MXC=y +CONFIG_NAND=y +CONFIG_NAND_MXS=y +CONFIG_PHYLIB=y +CONFIG_PHY_SMSC=y +CONFIG_FEC_MXC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_MXC_UART=y +CONFIG_IMX_THERMAL=y +CONFIG_VIDEO=y +CONFIG_VIDEO_IPUV3=y |