summaryrefslogtreecommitdiff
path: root/common/miiphyutil.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:24:07 +0000
committerwdenk <wdenk>2002-11-03 00:24:07 +0000
commitc609719b8d1b2dca590e0ed499016d041203e403 (patch)
tree7ea1755d80903ff972f312a249eb856061d40e15 /common/miiphyutil.c
parent5b1d713721c3ea02549940133f09236783dda1f9 (diff)
Initial revision
Diffstat (limited to 'common/miiphyutil.c')
-rw-r--r--common/miiphyutil.c172
1 files changed, 172 insertions, 0 deletions
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
new file mode 100644
index 00000000000..6b2425f660f
--- /dev/null
+++ b/common/miiphyutil.c
@@ -0,0 +1,172 @@
+/*
+ * (C) Copyright 2001
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This provides a bit-banged interface to the ethernet MII management
+ * channel.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+
+/*****************************************************************************
+ *
+ * Read the OUI, manufacture's model number, and revision number.
+ *
+ * OUI: 22 bits (unsigned int)
+ * Model: 6 bits (unsigned char)
+ * Revision: 4 bits (unsigned char)
+ *
+ * Returns:
+ * 0 on success
+ */
+int miiphy_info (unsigned char addr,
+ unsigned int *oui,
+ unsigned char *model, unsigned char *rev)
+{
+ unsigned int reg = 0;
+
+ /*
+ * Trick: we are reading two 16 registers into a 32 bit variable
+ * so we do a 16 read into the high order bits of the variable (big
+ * endian, you know), shift it down 16 bits, and the read the rest.
+ */
+ if (miiphy_read (addr, PHY_PHYIDR2, (unsigned short *) &reg) != 0) {
+#ifdef DEBUG
+ printf ("PHY ID register 2 read failed\n");
+#endif
+ return (-1);
+ }
+ reg >>= 16;
+
+#ifdef DEBUG
+ printf ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
+#endif
+ if (reg == 0xFFFF) {
+ /* No physical device present at this address */
+ return (-1);
+ }
+
+ if (miiphy_read (addr, PHY_PHYIDR1, (unsigned short *) &reg) != 0) {
+#ifdef DEBUG
+ printf ("PHY ID register 1 read failed\n");
+#endif
+ return (-1);
+ }
+#ifdef DEBUG
+ printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
+#endif
+ *oui = ( reg >> 10);
+ *model = (unsigned char) ((reg >> 4) & 0x0000003F);
+ *rev = (unsigned char) ( reg & 0x0000000F);
+ return (0);
+}
+
+
+/*****************************************************************************
+ *
+ * Reset the PHY.
+ * Returns:
+ * 0 on success
+ */
+int miiphy_reset (unsigned char addr)
+{
+ unsigned short reg;
+ int loop_cnt;
+
+ if (miiphy_write (addr, PHY_BMCR, 0x8000) != 0) {
+#ifdef DEBUG
+ printf ("PHY reset failed\n");
+#endif
+ return (-1);
+ }
+
+ /*
+ * Poll the control register for the reset bit to go to 0 (it is
+ * auto-clearing). This should happen within 0.5 seconds per the
+ * IEEE spec.
+ */
+ loop_cnt = 0;
+ reg = 0x8000;
+ while (((reg & 0x8000) != 0) && (loop_cnt++ < 1000000)) {
+ if (miiphy_read (addr, PHY_BMCR, &reg) != 0) {
+# ifdef DEBUG
+ printf ("PHY status read failed\n");
+# endif
+ return (-1);
+ }
+ }
+ if ((reg & 0x8000) == 0) {
+ return (0);
+ } else {
+ printf ("PHY reset timed out\n");
+ return (-1);
+ }
+ return (0);
+}
+
+
+/*****************************************************************************
+ *
+ * Determine the ethernet speed (10/100).
+ */
+int miiphy_speed (unsigned char addr)
+{
+ unsigned short reg;
+
+ if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
+ printf ("PHY speed1 read failed, assuming 10bT\n");
+ return (_10BASET);
+ }
+
+ if ((reg & PHY_ANLPAR_100) != 0) {
+ return (_100BASET);
+ } else {
+ return (_10BASET);
+ }
+}
+
+
+/*****************************************************************************
+ *
+ * Determine full/half duplex.
+ */
+int miiphy_duplex (unsigned char addr)
+{
+ unsigned short reg;
+
+ if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
+ printf ("PHY duplex read failed, assuming half duplex\n");
+ return (HALF);
+ }
+
+ if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
+ return (FULL);
+ } else {
+ return (HALF);
+ }
+}
+
+#endif /* CONFIG_MII || (CONFIG_COMMANDS & CFG_CMD_MII) */