Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 171 deletions

diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
deleted file mode 100644
index 887156486a..0000000000
--- a/common/cmd_reiser.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * (C) Copyright 2003 - 2004
- * Sysgo Real-Time Solutions, AG <www.elinos.com>
- * Pavel Bartusek <pba@sysgo.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Reiserfs support
- */
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <reiserfs.h>
-#include <part.h>
-
-#ifndef CONFIG_DOS_PARTITION
-#error DOS partition support must be selected
-#endif
-
-/* #define	REISER_DEBUG */
-
-#ifdef	REISER_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *filename = "/";
-	int dev, part;
-	block_dev_desc_t *dev_desc=NULL;
-	disk_partition_t info;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	if (argc == 4) {
-	    filename = argv[3];
-	}
-
-	dev = dev_desc->dev;
-	PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
-
-	reiserfs_set_blk_dev(dev_desc, &info);
-
-	if (!reiserfs_mount(info.size)) {
-		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		return 1;
-	}
-
-	if (reiserfs_ls (filename)) {
-		printf ("** Error reiserfs_ls() **\n");
-		return 1;
-	};
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	reiserls,	4,	1,	do_reiserls,
-	"list files in a directory (default /)",
-	"<interface> <dev[:part]> [directory]\n"
-	"    - list files from 'dev' on 'interface' in a 'directory'"
-);
-
-/******************************************************************************
- * Reiserfs boot command intepreter. Derived from diskboot
- */
-int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *filename = NULL;
-	int dev, part;
-	ulong addr = 0, filelen;
-	disk_partition_t info;
-	block_dev_desc_t *dev_desc = NULL;
-	unsigned long count;
-	char *addr_str;
-
-	switch (argc) {
-	case 3:
-		addr_str = getenv("loadaddr");
-		if (addr_str != NULL) {
-			addr = simple_strtoul (addr_str, NULL, 16);
-		} else {
-			addr = CONFIG_SYS_LOAD_ADDR;
-		}
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 4:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 5:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = 0;
-		break;
-	case 6:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = simple_strtoul (argv[5], NULL, 16);
-		break;
-
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	if (!filename) {
-		puts ("\n** No boot file defined **\n");
-		return 1;
-	}
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->dev;
-
-	printf("Loading file \"%s\" from %s device %d%c%c\n",
-		filename, argv[1], dev,
-		part ? ':' : ' ', part ? part + '0' : ' ');
-
-	reiserfs_set_blk_dev(dev_desc, &info);
-
-	if (!reiserfs_mount(info.size)) {
-		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		return 1;
-	}
-
-	filelen = reiserfs_open(filename);
-	if (filelen < 0) {
-		printf("** File not found %s **\n", filename);
-		return 1;
-	}
-	if ((count < filelen) && (count != 0)) {
-	    filelen = count;
-	}
-
-	if (reiserfs_read((char *)addr, filelen) != filelen) {
-		printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
-		return 1;
-	}
-
-	/* Loading ok, update default load address */
-	load_addr = addr;
-
-	printf ("\n%ld bytes read\n", filelen);
-	setenv_hex("filesize", filelen);
-
-	return filelen;
-}
-
-U_BOOT_CMD(
-	reiserload,	6,	0,	do_reiserload,
-	"load binary file from a Reiser filesystem",
-	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
-	"    - load binary file 'filename' from 'dev' on 'interface'\n"
-	"      to address 'addr' from dos filesystem"
-);