Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig.  Next, as you cannot
have SYS_I2C_LEGACY and DM_I2C at the same time, introduce
CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only
in SPL.  Finally, for some PowerPC cases we also need
CONFIG_TPL_SYS_I2C_LEGACY support.  Convert all of the existing users to
one or more symbols.

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 15 insertions, 15 deletions

diff --git a/cmd/date.c b/cmd/date.c
index 149ca426e8..0e2dfbc4fc 100644
--- a/cmd/date.c
+++ b/cmd/date.c
@@ -49,7 +49,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
 			return CMD_RET_FAILURE;
 		}
 	}
-#elif defined(CONFIG_SYS_I2C_LEGACY)
+#elif CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 	old_bus = i2c_get_bus_num();
 	i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
 #else
@@ -122,7 +122,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
 	}
 
 	/* switch back to original I2C bus */
-#ifdef CONFIG_SYS_I2C_LEGACY
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 	i2c_set_bus_num(old_bus);
 #elif !defined(CONFIG_DM_RTC)
 	I2C_SET_BUS(old_bus);
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index 7e1a5146f1..ea389c392c 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -52,7 +52,7 @@ void eeprom_init(int bus)
 	/* I2C EEPROM */
 #if CONFIG_IS_ENABLED(DM_I2C)
 	eeprom_i2c_bus = bus;
-#elif defined(CONFIG_SYS_I2C_LEGACY)
+#elif CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 	if (bus >= 0)
 		i2c_set_bus_num(bus);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
diff --git a/cmd/i2c.c b/cmd/i2c.c
index cbc8bd008b..7919d01303 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -98,7 +98,7 @@ static uint	i2c_mm_last_alen;
  * pairs.  The following macros take care of this */
 
 #if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
 static struct
 {
 	uchar	bus;
@@ -114,7 +114,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define COMPARE_BUS(b,i)	((b) == 0)	/* Make compiler happy */
 #define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)] == (a))
 #define NO_PROBE_ADDR(i)	i2c_no_probes[(i)]
-#endif	/* defined(CONFIG_SYS_I2C_LEGACY) */
+#endif	/* CONFIG_IS_ENABLED(SYS_I2C_LEGACY) */
 #endif
 
 #define DISP_LINE_LEN	16
@@ -209,7 +209,7 @@ void i2c_init_board(void)
  *
  * Returns I2C bus speed in Hz.
  */
-#if !defined(CONFIG_SYS_I2C_LEGACY) && !CONFIG_IS_ENABLED(DM_I2C)
+#if !CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && !CONFIG_IS_ENABLED(DM_I2C)
 /*
  * TODO: Implement architecture-specific get/set functions
  * Should go away, if we switched completely to new multibus support
@@ -1725,7 +1725,7 @@ static void show_bus(struct udevice *bus)
  *
  * Returns zero always.
  */
-#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
 			   char *const argv[])
 {
@@ -1811,7 +1811,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
  * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
  * on error.
  */
-#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
 		CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 			  char *const argv[])
@@ -1834,7 +1834,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 		printf("Current bus is %d\n", bus_no);
 	} else {
 		bus_no = dectoul(argv[1], NULL);
-#if defined(CONFIG_SYS_I2C_LEGACY)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 		if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
 			printf("Invalid bus %d\n", bus_no);
 			return -1;
@@ -1852,7 +1852,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 
 	return ret ? CMD_RET_FAILURE : 0;
 }
-#endif  /* defined(CONFIG_SYS_I2C_LEGACY) */
+#endif  /* CONFIG_IS_ENABLED(SYS_I2C_LEGACY) */
 
 /**
  * do_i2c_bus_speed() - Handle the "i2c speed" command-line command
@@ -1951,7 +1951,7 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
 		printf("Error: Not supported by the driver\n");
 		return CMD_RET_FAILURE;
 	}
-#elif defined(CONFIG_SYS_I2C_LEGACY)
+#elif CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 	i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
 #else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1960,11 +1960,11 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
 }
 
 static struct cmd_tbl cmd_i2c_sub[] = {
-#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_SYS_I2C_LEGACY) || \
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
 	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
 	U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
 #endif  /* CONFIG_I2C_MULTI_BUS */
@@ -2036,12 +2036,12 @@ static int do_i2c(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 /***************************************************/
 #ifdef CONFIG_SYS_LONGHELP
 static char i2c_help_text[] =
-#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
 	"i2c " /* That's the prefix for the crc32 command below. */
 #endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_SYS_I2C_LEGACY) || \
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
 	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
 	"i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */