Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

23 files changed, 1363 insertions, 29 deletions

diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index d9c88a074f..b2d5378143 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -23,6 +23,7 @@
 #include "../common/qixis.h"
 #include "../common/vsc3316_3308.h"
 #include "../common/idt8t49n222a_serdes_clk.h"
+#include "../common/zm7300.h"
 #include "b4860qds.h"
 #include "b4860qds_qixis.h"
 #include "b4860qds_crossbar_con.h"
@@ -94,6 +95,238 @@ int select_i2c_ch_pca(u8 ch)
 	return 0;
 }
 
+/*
+ * read_voltage from sensor on I2C bus
+ * We use average of 4 readings, waiting for 532us befor another reading
+ */
+#define WAIT_FOR_ADC	532	/* wait for 532 microseconds for ADC */
+#define NUM_READINGS	4	/* prefer to be power of 2 for efficiency */
+
+static inline int read_voltage(void)
+{
+	int i, ret, voltage_read = 0;
+	u16 vol_mon;
+
+	for (i = 0; i < NUM_READINGS; i++) {
+		ret = i2c_read(I2C_VOL_MONITOR_ADDR,
+			I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
+		if (ret) {
+			printf("VID: failed to read core voltage\n");
+			return ret;
+		}
+		if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
+			printf("VID: Core voltage sensor error\n");
+			return -1;
+		}
+		debug("VID: bus voltage reads 0x%04x\n", vol_mon);
+		/* LSB = 4mv */
+		voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
+		udelay(WAIT_FOR_ADC);
+	}
+	/* calculate the average */
+	voltage_read /= NUM_READINGS;
+
+	return voltage_read;
+}
+
+static int adjust_vdd(ulong vdd_override)
+{
+	int re_enable = disable_interrupts();
+	ccsr_gur_t __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 fusesr;
+	u8 vid;
+	int vdd_target, vdd_last;
+	int existing_voltage, temp_voltage, voltage; /* all in 1/10 mV */
+	int ret;
+	unsigned int orig_i2c_speed;
+	unsigned long vdd_string_override;
+	char *vdd_string;
+	static const uint16_t vdd[32] = {
+		0,	/* unused */
+		9875,	/* 0.9875V */
+		9750,
+		9625,
+		9500,
+		9375,
+		9250,
+		9125,
+		9000,
+		8875,
+		8750,
+		8625,
+		8500,
+		8375,
+		8250,
+		8125,
+		10000,	/* 1.0000V */
+		10125,
+		10250,
+		10375,
+		10500,
+		10625,
+		10750,
+		10875,
+		11000,
+		0,	/* reserved */
+	};
+	struct vdd_drive {
+		u8 vid;
+		unsigned voltage;
+	};
+
+	ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
+	if (ret) {
+		printf("VID: I2c failed to switch channel\n");
+		ret = -1;
+		goto exit;
+	}
+
+	/* get the voltage ID from fuse status register */
+	fusesr = in_be32(&gur->dcfg_fusesr);
+	vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+		FSL_CORENET_DCFG_FUSESR_VID_MASK;
+	if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
+		vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+			FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+	}
+	vdd_target = vdd[vid];
+	debug("VID:Reading from from fuse,vid=%x vdd is %dmV\n",
+	      vid, vdd_target/10);
+
+	/* check override variable for overriding VDD */
+	vdd_string = getenv("b4qds_vdd_mv");
+	if (vdd_override == 0 && vdd_string &&
+	    !strict_strtoul(vdd_string, 10, &vdd_string_override))
+		vdd_override = vdd_string_override;
+	if (vdd_override >= 819 && vdd_override <= 1212) {
+		vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+		debug("VDD override is %lu\n", vdd_override);
+	} else if (vdd_override != 0) {
+		printf("Invalid value.\n");
+	}
+
+	if (vdd_target == 0) {
+		printf("VID: VID not used\n");
+		ret = 0;
+		goto exit;
+	}
+
+	/*
+	 * Read voltage monitor to check real voltage.
+	 * Voltage monitor LSB is 4mv.
+	 */
+	vdd_last = read_voltage();
+	if (vdd_last < 0) {
+		printf("VID: abort VID adjustment\n");
+		ret = -1;
+		goto exit;
+	}
+
+	debug("VID: Core voltage is at %d mV\n", vdd_last);
+	ret = select_i2c_ch_pca(I2C_MUX_CH_DPM);
+	if (ret) {
+		printf("VID: I2c failed to switch channel to DPM\n");
+		ret = -1;
+		goto exit;
+	}
+
+	/* Round up to the value of step of Voltage regulator */
+	voltage = roundup(vdd_target, ZM_STEP);
+	debug("VID: rounded up voltage = %d\n", voltage);
+
+	/* lower the speed to 100kHz to access ZM7300 device */
+	debug("VID: Setting bus speed to 100KHz if not already set\n");
+	orig_i2c_speed = i2c_get_bus_speed();
+	if (orig_i2c_speed != 100000)
+		i2c_set_bus_speed(100000);
+
+	/* Read the existing level on board, if equal to requsted one,
+	   no need to re-set */
+	existing_voltage = zm_read_voltage();
+
+	/* allowing the voltage difference of one step 0.0125V acceptable */
+	if ((existing_voltage >= voltage) &&
+	    (existing_voltage < (voltage + ZM_STEP))) {
+		debug("VID: voltage already set as requested,returning\n");
+		ret = existing_voltage;
+		goto out;
+	}
+	debug("VID: Changing voltage for board from %dmV to %dmV\n",
+	      existing_voltage/10, voltage/10);
+
+	if (zm_disable_wp() < 0) {
+		ret = -1;
+		goto out;
+	}
+	/* Change Voltage: the change is done through all the steps in the
+	   way, to avoid reset to the board due to power good signal fail
+	   in big voltage change gap jump.
+	*/
+	if (existing_voltage > voltage) {
+		temp_voltage = existing_voltage - ZM_STEP;
+			while (temp_voltage >= voltage) {
+				ret = zm_write_voltage(temp_voltage);
+				if (ret == temp_voltage) {
+					temp_voltage -= ZM_STEP;
+				} else {
+					/* ZM7300 device failed to set
+					 * the voltage */
+					printf
+					("VID:Stepping down vol failed:%dmV\n",
+					 temp_voltage/10);
+				     ret = -1;
+				     goto out;
+				}
+			}
+	} else {
+		temp_voltage = existing_voltage + ZM_STEP;
+			while (temp_voltage < (voltage + ZM_STEP)) {
+				ret = zm_write_voltage(temp_voltage);
+				if (ret == temp_voltage) {
+					temp_voltage += ZM_STEP;
+				} else {
+					/* ZM7300 device failed to set
+					 * the voltage */
+					printf
+					("VID:Stepping up vol failed:%dmV\n",
+					 temp_voltage/10);
+				     ret = -1;
+				     goto out;
+				}
+			}
+	}
+
+	if (zm_enable_wp() < 0)
+		ret = -1;
+
+	/* restore the speed to 400kHz */
+out:	debug("VID: Restore the I2C bus speed to %dKHz\n",
+				orig_i2c_speed/1000);
+	i2c_set_bus_speed(orig_i2c_speed);
+	if (ret < 0)
+		goto exit;
+
+	ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
+	if (ret) {
+		printf("VID: I2c failed to switch channel\n");
+		ret = -1;
+		goto exit;
+	}
+	vdd_last = read_voltage();
+	select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+	if (vdd_last > 0)
+		printf("VID: Core voltage %d mV\n", vdd_last);
+	else
+		ret = -1;
+
+exit:
+	if (re_enable)
+		enable_interrupts();
+	return ret;
+}
+
 int configure_vsc3316_3308(void)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -697,6 +930,13 @@ int board_early_init_r(void)
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	setup_portals();
 #endif
+	/*
+	 * Adjust core voltage according to voltage ID
+	 * This function changes I2C mux to channel 2.
+	 */
+	if (adjust_vdd(0) < 0)
+		printf("Warning: Adjusting core voltage failed\n");
+
 	/* SerDes1 refclks need to be set again, as default clks
 	 * are not suitable for CPRI and onboard SGMIIs to work
 	 * simultaneously.
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index f6a0879753..22b57ccaa8 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_P5020DS)		+= ics307_clk.o
 obj-$(CONFIG_P5040DS)		+= ics307_clk.o
 obj-$(CONFIG_VSC_CROSSBAR)    += vsc3316_3308.o
 obj-$(CONFIG_IDT8T49N222A)	+= idt8t49n222a_serdes_clk.o
+obj-$(CONFIG_ZM7300)		+= zm7300.o
 
 # deal with common files for P-series corenet based devices
 obj-$(CONFIG_P2041RDB)	+= p_corenet/
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 9c18dd8242..33a5a5a8f5 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -425,13 +425,13 @@ int mac_read_from_eeprom(void)
 
 	if (read_eeprom()) {
 		printf("Read failed.\n");
-		return -1;
+		return 0;
 	}
 
 	if (!is_valid) {
 		printf("Invalid ID (%02x %02x %02x %02x)\n",
 		       e.id[0], e.id[1], e.id[2], e.id[3]);
-		return -1;
+		return 0;
 	}
 
 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
@@ -447,7 +447,7 @@ int mac_read_from_eeprom(void)
 	crcp = (void *)&e + crc_offset;
 	if (crc != be32_to_cpu(*crcp)) {
 		printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc));
-		return -1;
+		return 0;
 	}
 
 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
diff --git a/board/freescale/common/zm7300.c b/board/freescale/common/zm7300.c
new file mode 100644
index 0000000000..be5953ad2d
--- /dev/null
+++ b/board/freescale/common/zm7300.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/* Power-One ZM7300 DPM */
+#include "zm7300.h"
+
+#define DPM_WP 0x96
+#define WRP_OPCODE 0x01
+#define WRM_OPCODE 0x02
+#define RRP_OPCODE 0x11
+
+#define DPM_SUCCESS 0x01
+#define DPM_EXEC_FAIL 0x00
+
+static const uint16_t hex_to_1_10mv[] = {
+	5000,
+	5125,
+	5250,
+	5375,
+	5500,
+	5625,
+	5750,
+	5875,
+	6000,
+	6125,
+	6250,
+	6375,
+	6500,
+	6625,
+	6750,
+	6875,
+	7000,
+	7125,
+	7250,
+	7375,
+	7500,
+	7625,
+	7750,
+	7875,
+	8000,
+	8125,
+	8250,
+	8375,
+	8500,
+	8625,
+	8750,
+	8875,
+	9000,
+	9125,
+	9250,
+	9375,
+	9500,  /* 0.95mV */
+	9625,
+	9750,
+	9875,
+	10000,  /* 1.0V */
+	10125,
+	10250,
+	10375,
+	10500,
+	10625,
+	10750,
+	10875,
+	11000,
+	11125,
+	11250,
+	11375,
+	11500,
+	11625,
+	11750,
+	11875,
+	12000,
+	12125,
+	12250,
+	12375,
+	0,	/* reserved */
+};
+
+
+/* Read Data d from Register r of POL p */
+u8 dpm_rrp(uchar r)
+{
+	u8 ret[5];
+
+	ret[0] = RRP_OPCODE;
+	/* POL is 0 */
+	ret[1] = 0;
+	ret[2] = r;
+	i2c_read(I2C_DPM_ADDR, 0, -3, ret, 2);
+	if (ret[1] == DPM_SUCCESS) { /* the DPM returned success as status */
+		debug("RRP_OPCODE returned success data is %x\n", ret[0]);
+		return ret[0];
+	} else {
+		return -1;
+	}
+}
+
+/* Write Data d into DPM register r (RAM) */
+int dpm_wrm(u8 r, u8 d)
+{
+	u8 ret[5];
+
+	ret[0] = WRM_OPCODE;
+	ret[1] = r;
+	ret[2] = d;
+	i2c_read(I2C_DPM_ADDR, 0, -3, ret, 1);
+	if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
+		debug("WRM_OPCODE returned success data is %x\n", ret[0]);
+		return ret[0];
+	} else {
+		return -1;
+	}
+}
+
+/* Write Data d into Register r of POL(s) a */
+int dpm_wrp(u8 r, u8 d)
+{
+	u8 ret[7];
+
+	ret[0] = WRP_OPCODE;
+	/* only POL0 is present */
+	ret[1] = 0x01;
+	ret[2] = 0x00;
+	ret[3] = 0x00;
+	ret[4] = 0x00;
+	ret[5] = r;
+	ret[6] = d;
+	i2c_read(I2C_DPM_ADDR, 0, -7, ret, 1);
+	if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */
+		debug("WRP_OPCODE returned success data is %x\n", ret[0]);
+		return 0;
+	} else {
+		return -1;
+	}
+}
+
+/* Uses the DPM command RRP */
+u8 zm_read(uchar reg)
+{
+	u8 d;
+	d = dpm_rrp(reg);
+	return d;
+}
+
+/* ZM_write --
+	Steps:
+	a. Write data to the register
+	b. Read data from register and compare to written value
+	c. Return return_code & voltage_read
+*/
+u8 zm_write(u8 reg, u8 data)
+{
+	u8 d;
+
+	/* write data to register */
+	dpm_wrp(reg, data);
+
+	/* read register and compare to written value */
+	d = dpm_rrp(reg);
+	if (d != data) {
+		printf("zm_write : Comparison register data failed\n");
+		return -1;
+	}
+
+	return d;
+}
+
+/* zm_write_out_voltage
+ * voltage in 1/10 mV
+ */
+int zm_write_voltage(int voltage)
+{
+	u8 reg = 0x7, vid;
+	uint16_t voltage_read;
+	u8 ret;
+
+	vid =  (voltage - 5000) / ZM_STEP;
+
+	ret = zm_write(reg, vid);
+	if (ret != -1) {
+		voltage_read = hex_to_1_10mv[ret];
+		debug("voltage set to %dmV\n", voltage_read/10);
+		return voltage_read;
+	}
+	return -1;
+}
+
+/* zm_read_out_voltage
+ * voltage in 1/10 mV
+ */
+int zm_read_voltage(void)
+{
+	u8 reg = 0x7;
+	u8 ret;
+	int voltage;
+
+	ret = zm_read(reg);
+	if (ret != -1) {
+		voltage =  hex_to_1_10mv[ret];
+		debug("Voltage read is %dmV\n", voltage/10);
+		return voltage;
+	} else {
+		return -1;
+	}
+}
+
+int zm_disable_wp()
+{
+	u8 new_wp_value;
+
+	/* Disable using Write-Protect register 0x96 */
+	new_wp_value = 0x8;
+	if ((dpm_wrm(DPM_WP, new_wp_value)) < 0) {
+		printf("Disable Write-Protect register failed\n");
+		return -1;
+	}
+	return 0;
+}
+
+int zm_enable_wp()
+{
+	u8 orig_wp_value;
+	orig_wp_value = 0x0;
+
+	/* Enable using Write-Protect register 0x96 */
+	if ((dpm_wrm(DPM_WP, orig_wp_value)) < 0) {
+		printf("Enable Write-Protect register failed\n");
+		return -1;
+	}
+	return 0;
+}
+
diff --git a/board/freescale/common/zm7300.h b/board/freescale/common/zm7300.h
new file mode 100644
index 0000000000..6b4d035970
--- /dev/null
+++ b/board/freescale/common/zm7300.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __ZM7300_H_
+#define __ZM7300_H	1_
+
+#include <common.h>
+#include <i2c.h>
+#include <errno.h>
+#include <asm/io.h>
+
+#define ZM_STEP 125
+int zm7300_set_voltage(int voltage_1_10mv);
+int zm_write_voltage(int voltage);
+int zm_read_voltage(void);
+int zm_disable_wp(void);
+int zm_enable_wp(void);
+
+#endif	/* __ZM7300_H_ */
diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/freescale/qemu-ppce500/qemu-ppce500.c
index 3dbb0cf43b..230870d90e 100644
--- a/board/freescale/qemu-ppce500/qemu-ppce500.c
+++ b/board/freescale/qemu-ppce500/qemu-ppce500.c
@@ -346,3 +346,23 @@ ulong get_bus_freq (ulong dummy)
 	get_sys_info(&sys_info);
 	return sys_info.freq_systembus;
 }
+
+/*
+ * Return the number of cores on this SOC.
+ */
+int cpu_numcores(void)
+{
+	/*
+	 * The QEMU u-boot target only needs to drive the first core,
+	 * spinning and device tree nodes get driven by QEMU itself
+	 */
+	return 1;
+}
+
+/*
+ * Return a 32-bit mask indicating which cores are present on this SOC.
+ */
+u32 cpu_mask(void)
+{
+	return (1 << cpu_numcores()) - 1;
+}
diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile
new file mode 100644
index 0000000000..f7f7fc0177
--- /dev/null
+++ b/board/freescale/t4rdb/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_T4240RDB) += t4240rdb.o
+obj-y	+= ddr.o
+obj-y	+= eth.o
+obj-$(CONFIG_PCI)	+= pci.o
+obj-y	+= law.o
+obj-y	+= tlb.o
diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c
new file mode 100644
index 0000000000..5a43c1bc78
--- /dev/null
+++ b/board/freescale/t4rdb/ddr.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	if (popts->registered_dimm_en)
+		pbsp = rdimms[0];
+	else
+		pbsp = udimms[0];
+
+
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks &&
+		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found for data\n"
+			"rate %lu MT/s\n"
+			"Trying to use the highest speed (%u) parameters\n",
+			ddr_freq, pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x,\n"
+		"wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/t4rdb/ddr.h b/board/freescale/t4rdb/ddr.h
new file mode 100644
index 0000000000..7b854767e7
--- /dev/null
+++ b/board/freescale/t4rdb/ddr.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a},
+	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09},
+	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b},
+	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a},
+	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
+	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
+	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a},
+	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a},
+	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
+	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
+	{}
+};
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+};
+
+
+#endif
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
new file mode 100644
index 0000000000..d220475b5a
--- /dev/null
+++ b/board/freescale/t4rdb/eth.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include <hwconfig.h>
+
+#include "../common/fman.h"
+#include "t4rdb.h"
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	return;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+	int i, interface;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	struct mii_dev *dev;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1, srds_prtcl_s2;
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	if (srds_prtcl_s1 == 28) {
+		/* SGMII */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2);
+		fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY_ADDR3);
+		fm_info_set_phy_address(FM1_DTSEC4, SGMII_PHY_ADDR4);
+	} else {
+		puts("Invalid SerDes1 protocol for T4240RDB\n");
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_SGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	if (srds_prtcl_s2 == 56) {
+		/* SGMII && XFI */
+		fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5);
+		fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6);
+		fm_info_set_phy_address(FM2_DTSEC3, SGMII_PHY_ADDR7);
+		fm_info_set_phy_address(FM2_DTSEC4, SGMII_PHY_ADDR8);
+		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC1_PHY_ADDR);
+	} else {
+		puts("Invalid SerDes2 protocol for T4240RDB\n");
+	}
+
+	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_SGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+#endif /* CONFIG_SYS_NUM_FMAN */
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c
new file mode 100644
index 0000000000..1f5876885c
--- /dev/null
+++ b/board/freescale/t4rdb/law.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t4rdb/pci.c b/board/freescale/t4rdb/pci.c
new file mode 100644
index 0000000000..6387a20cae
--- /dev/null
+++ b/board/freescale/t4rdb/pci.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c
new file mode 100644
index 0000000000..5448c86c48
--- /dev/null
+++ b/board/freescale/t4rdb/t4240rdb.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "t4rdb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	struct cpu_type *cpu = gd->arch.cpu;
+
+	printf("Board: %sRDB, ", cpu->name);
+
+	puts("SERDES Reference Clocks:\n");
+	printf("       SERDES1=100MHz SERDES2=156.25MHz\n"
+	       "       SERDES3=100MHz SERDES4=100MHz\n");
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
+
+/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name>      = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock  : Critical clocks which are not printed already
+ * RCW    : RCW source if not printed already
+ * Misc   : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+	int rcwsrc;
+
+	/* RCW section SW3[4] */
+	rcwsrc = 0x0;
+	puts("RCW source  = ");
+	switch (rcwsrc & 0x1) {
+	case 0x1:
+		puts("SDHC/eMMC\n");
+		break;
+	default:
+		puts("I2C normal addressing\n");
+		break;
+	}
+}
diff --git a/board/freescale/t4rdb/t4_pbi.cfg b/board/freescale/t4rdb/t4_pbi.cfg
new file mode 100644
index 0000000000..c9f8ced2a3
--- /dev/null
+++ b/board/freescale/t4rdb/t4_pbi.cfg
@@ -0,0 +1,31 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#slow mdio clock
+095fc030 00008148
+095fd030 00808148
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg
new file mode 100644
index 0000000000..13408bd01f
--- /dev/null
+++ b/board/freescale/t4rdb/t4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#serdes protocol  28_56_2_10
+16070019 18101916 00000000 00000000
+70701050 00448c00 6c020000 f5000000
+00000000 ee0000ee 00000000 000287fc
+00000000 50000000 00000000 00000028
diff --git a/board/freescale/t4rdb/t4rdb.h b/board/freescale/t4rdb/t4rdb.h
new file mode 100644
index 0000000000..fb25d43291
--- /dev/null
+++ b/board/freescale/t4rdb/t4rdb.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __T4RDB_H__
+#define __T4RDB_H__
+
+#undef CONFIG_SYS_NUM_FM1_DTSEC
+#undef CONFIG_SYS_NUM_FM2_DTSEC
+#define CONFIG_SYS_NUM_FM1_DTSEC	4
+#define CONFIG_SYS_NUM_FM2_DTSEC	4
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c
new file mode 100644
index 0000000000..4b50bcd09b
--- /dev/null
+++ b/board/freescale/t4rdb/tlb.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 512K SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_512K, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_1G, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
+		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
+		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_256K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_32M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_64K, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 95a19cdb2c..6bc8eb85ea 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -79,7 +79,7 @@ int get_scl(void)
 
 
 #define ZL30158_RST	8
-#define ZL30343_RST	9
+#define BFTIC4_RST	0
 
 int board_early_init_f(void)
 {
@@ -88,13 +88,15 @@ int board_early_init_f(void)
 	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
 	setbits_be32(&gur->ddrclkdr, 0x001f000f);
 
-	/* take the Zarlinks out of reset as soon as possible */
-	qrio_prst(ZL30158_RST, false, false);
-	qrio_prst(ZL30343_RST, false, false);
+	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable WD on it */
+	qrio_wdmask(BFTIC4_RST, true);
 
-	/* and set their reset to power-up only */
-	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST);
-	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST);
+	/* set the ZL30138's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and take it out of reset as soon as possible (needed for Hooper) */
+	qrio_prst(ZL30158_RST, false, false);
 
 	return 0;
 }
@@ -113,6 +115,12 @@ int board_early_init_r(void)
 	if (ret)
 		printf("error triggering PCIe FPGA config\n");
 
+	/* enable the Unit LED (red) & Boot LED (on) */
+	qrio_set_leds();
+
+	/* enable Application Buffer */
+	qrio_enable_app_buffer();
+
 	return ret;
 }
 
@@ -121,16 +129,37 @@ unsigned long get_board_sys_clk(unsigned long dummy)
 	return 66666666;
 }
 
+#define ETH_FRONT_PHY_RST	15
+#define QSFP2_RST		11
+#define QSFP1_RST		10
+#define ZL30343_RST		9
+
 int misc_init_f(void)
 {
 	/* configure QRIO pis for i2c deblocking */
 	i2c_deblock_gpio_cfg();
 
+	/* configure the front phy's prstcfg and take it out of reset */
+	qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prst(ETH_FRONT_PHY_RST, false, false);
+
+	/* set the ZL30343 prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable the WD on it */
+	qrio_wdmask(ZL30343_RST, true);
+
+	/* set the QSFPs' prstcfg to reset at power-up and unit rst only */
+	qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST);
+	qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST);
+
+	/* and enable the WD on them */
+	qrio_wdmask(QSFP1_RST, true);
+	qrio_wdmask(QSFP2_RST, true);
+
 	return 0;
 }
 
 #define NUM_SRDS_BANKS	2
-#define PHY_RST		15
 
 int misc_init_r(void)
 {
@@ -151,9 +180,6 @@ int misc_init_r(void)
 		}
 	}
 
-	/* take the mgmt eth phy out of reset */
-	qrio_prst(PHY_RST, false, false);
-
 	return 0;
 }
 
@@ -166,9 +192,23 @@ int hush_init_var(void)
 #endif
 
 #if defined(CONFIG_LAST_STAGE_INIT)
+
 int last_stage_init(void)
 {
+#if defined(CONFIG_KMCOGE4)
+	/* on KMCOGE4, the BFTIC4 is on the LBAPP2 */
+	struct bfticu_iomap *bftic4 =
+		(struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE;
+	u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+#endif
 	set_km_env();
+
 	return 0;
 }
 #endif
@@ -232,3 +272,16 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_fman_mac_addresses(blob);
 #endif
 }
+
+#if defined(CONFIG_POST)
+
+/* DIC26_SELFTEST GPIO used to start factory test sw */
+#define SELFTEST_PORT	GPIO_A
+#define SELFTEST_PIN	31
+
+int post_hotkeys_pressed(void)
+{
+	qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN);
+	return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN);
+}
+#endif
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index 0267596e4e..afede994f1 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -20,6 +20,9 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
 #define PRSTCFG_POWUP_RST		0x3
 
 void qrio_prst(u8 bit, bool en, bool wden);
+void qrio_wdmask(u8 bit, bool wden);
 void qrio_prstcfg(u8 bit, u8 mode);
+void qrio_set_leds(void);
+void qrio_enable_app_buffer(void);
 
 void pci_of_setup(void *blob, bd_t *bd);
diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg
index 9af8bd5b57..1e0a171d88 100644
--- a/board/keymile/kmp204x/pbi.cfg
+++ b/board/keymile/kmp204x/pbi.cfg
@@ -8,16 +8,47 @@
 #
 
 #PBI commands
-#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
-#Freescale's errarta sheet suggests it may be done with PBI
+#Configure ALTCBAR for DCSR -> DCSR@89000000
+091380c0 000009C4
 09000010 00000000
+091380c0 000009C4
 09000014 00000000
+091380c0 000009C4
 09000018 81d00000
-09021008 0000f000
-09021028 0000f000
-09021048 0000f000
-09021068 0000f000
+#Workaround for A-004849
+091380c0 000009C4
+890B0050 00000002
+091380c0 000009C4
+890B0054 00000002
+091380c0 000009C4
+890B0058 00000002
+091380c0 000009C4
+890B005C 00000002
+091380c0 000009C4
+890B0090 00000002
+091380c0 000009C4
+890B0094 00000002
+091380c0 000009C4
+890B0098 00000002
+091380c0 000009C4
+890B009C 00000002
+091380c0 000009C4
+890B0108 00000012
+091380c0 000009C4
+#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
+89021008 0000f000
+091380c0 000009C4
+89021028 0000f000
+091380c0 000009C4
+89021048 0000f000
+091380c0 000009C4
+89021068 0000f000
+091380c0 000009C4
+#Flush PBL data
+09138000 00000000
+#Disable ALTCBAR
 09000018 00000000
+091380c0 000009C4
 #Initialize CPC1 as 1MB SRAM
 09010000 00200400
 09138000 00000000
diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c
index a484eb5749..2b0b054a11 100644
--- a/board/keymile/kmp204x/pci.c
+++ b/board/keymile/kmp204x/pci.c
@@ -94,20 +94,23 @@ err_out:
 }
 
 #define PCIE_SW_RST	14
-#define PEXHC_SW_RST	13
-#define HOOPER_SW_RST	12
+#define PEXHC_RST	13
+#define HOOPER_RST	12
 
 void pci_init_board(void)
 {
-	/* first wait for the PCIe FPGA to be configured
+	qrio_prstcfg(PCIE_SW_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(PEXHC_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(HOOPER_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+
+	/* wait for the PCIe FPGA to be configured
 	 * it has been triggered earlier in board_early_init_r */
-	int ret = wait_for_fpga_config();
-	if (ret)
+	if (wait_for_fpga_config())
 		printf("error finishing PCIe FPGA config\n");
 
 	qrio_prst(PCIE_SW_RST, false, false);
-	qrio_prst(PEXHC_SW_RST, false, false);
-	qrio_prst(HOOPER_SW_RST, false, false);
+	qrio_prst(PEXHC_RST, false, false);
+	qrio_prst(HOOPER_RST, false, false);
 	/* Hooper is not direcly PCIe capable */
 	mdelay(50);
 
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
index 49f9aa2546..b6ba93ada8 100644
--- a/board/keymile/kmp204x/qrio.c
+++ b/board/keymile/kmp204x/qrio.c
@@ -91,7 +91,7 @@ void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
 
 #define WDMASK_OFF	0x16
 
-static void qrio_wdmask(u8 bit, bool wden)
+void qrio_wdmask(u8 bit, bool wden)
 {
 	u16 wdmask;
 	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
@@ -144,3 +144,32 @@ void qrio_prstcfg(u8 bit, u8 mode)
 
 	out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
 }
+
+#define CTRLH_OFF		0x02
+#define CTRLH_WRL_BOOT		0x01
+#define CTRLH_WRL_UNITRUN	0x02
+
+void qrio_set_leds(void)
+{
+	u8 ctrlh;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* set UNIT LED to RED and BOOT LED to ON */
+	ctrlh = in_8(qrio_base + CTRLH_OFF);
+	ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN);
+	out_8(qrio_base + CTRLH_OFF, ctrlh);
+}
+
+#define CTRLL_OFF		0x03
+#define CTRLL_WRB_BUFENA	0x20
+
+void qrio_enable_app_buffer(void)
+{
+	u8 ctrll;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* enable application buffer */
+	ctrll = in_8(qrio_base + CTRLL_OFF);
+	ctrll |= (CTRLL_WRB_BUFENA);
+	out_8(qrio_base + CTRLL_OFF, ctrll);
+}
diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg
index 2d4c48cb9c..236d5138bc 100644
--- a/board/keymile/kmp204x/rcw_kmp204x.cfg
+++ b/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -7,5 +7,5 @@ aa55aa55 010e0100
 #64 bytes RCW data
 14600000 00000000 28200000 00000000
 148E70CF CFC02000 58000000 41000000
-00000000 00000000 00000000 F0428002
+00000000 00000000 00000000 F0428816
 00000000 00000000 00000000 00000000