ppc4xx: Remove unused code from PCI405 code

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 0 insertions, 871 deletions

diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 5c717e253d8..f558a2bc63a 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -32,13 +32,9 @@
 
 #include "pci405.h"
 
-
 #if defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_bootvx (cmd_tbl_t *, int, int, char *[]);
-unsigned long get_dcr(unsigned short);
-
 
 /*
  * Command loadpci: wait for signal from host and boot image.
@@ -97,33 +93,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	} else {
 		sprintf(addr, "%08x", *ptr);
 
-#if 0
-		/*
-		 * Boot image
-		 */
-		if (*ptr & 0x00000001) {
-			/*
-			 * Boot VxWorks image via bootvx
-			 */
-			addr[strlen(addr)-1] = '0';
-			printf("\nBooting VxWorks-Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootvx (cmdtp, 0, 1, local_args);
-		} else {
-			/*
-			 * Boot image via bootm (normally Linux)
-			 */
-			printf("\nBooting Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootm (cmdtp, 0, 1, local_args);
-		}
-#else
 		/*
 		 * Boot image via bootm
 		 */
@@ -133,7 +102,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
 		status = do_bootm (cmdtp, 0, 1, local_args);
-#endif
 	}
 
 	return 0;
@@ -143,843 +111,4 @@ U_BOOT_CMD(
 	"loadpci - Wait for pci-image and boot it\n",
 	NULL
 );
-
-#endif
-
-#if 1 /* test-only */
-int do_getpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int val;
-	int i;
-
-	printf("\nPCI Configuration Regs for PPC405GP:");
-	for (i=0; i<0x64; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, &val);
-		if (!(i % 0x10)) {
-			printf("\n%02x: ", i);
-		}
-		printf("%08x ", val);
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	getpci,	1,	1,	do_getpci,
-	"getpci  - Print own pci configuration registers\n",
-	NULL
-);
-
-int do_setpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	val = simple_strtol (argv[2], NULL, 16);
-
-	printf("\nWriting %08x to PCI reg %08x.\n", val, addr);
-	pci_write_config_dword(PCIDEVID_405GP, addr, val);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setpci,	3,	1,	do_setpci,
-	"setpci  - Set one pci configuration lword\n",
-	"<addr> <val>\n"
-	"        - Write pci configuration lword <val> to <addr>.\n"
-);
-
-int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int i;
-
-	printf("\nDevice Configuration Registers (DCR's) for PPC405GP:");
-	for (i=0; i<=0x1e0; i++) {
-		if (!(i % 0x8)) {
-			printf("\n%04x ", i);
-		}
-		printf("%08lx ", get_dcr(i));
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpdcr,	1,	1,	do_dumpdcr,
-	"dumpdcr - Dump all DCR registers\n",
-	NULL
-);
-
-
-int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:");
-	printf("\n%04x %08x ", 947, mfspr(947));
-	printf("\n%04x %08x ", 9, mfspr(9));
-	printf("\n%04x %08x ", 1014, mfspr(1014));
-	printf("\n%04x %08x ", 1015, mfspr(1015));
-	printf("\n%04x %08x ", 1010, mfspr(1010));
-	printf("\n%04x %08x ", 957, mfspr(957));
-	printf("\n%04x %08x ", 1008, mfspr(1008));
-	printf("\n%04x %08x ", 1018, mfspr(1018));
-	printf("\n%04x %08x ", 954, mfspr(954));
-	printf("\n%04x %08x ", 950, mfspr(950));
-	printf("\n%04x %08x ", 951, mfspr(951));
-	printf("\n%04x %08x ", 981, mfspr(981));
-	printf("\n%04x %08x ", 980, mfspr(980));
-	printf("\n%04x %08x ", 982, mfspr(982));
-	printf("\n%04x %08x ", 1012, mfspr(1012));
-	printf("\n%04x %08x ", 1013, mfspr(1013));
-	printf("\n%04x %08x ", 948, mfspr(948));
-	printf("\n%04x %08x ", 949, mfspr(949));
-	printf("\n%04x %08x ", 1019, mfspr(1019));
-	printf("\n%04x %08x ", 979, mfspr(979));
-	printf("\n%04x %08x ", 8, mfspr(8));
-	printf("\n%04x %08x ", 945, mfspr(945));
-	printf("\n%04x %08x ", 987, mfspr(987));
-	printf("\n%04x %08x ", 287, mfspr(287));
-	printf("\n%04x %08x ", 953, mfspr(953));
-	printf("\n%04x %08x ", 955, mfspr(955));
-	printf("\n%04x %08x ", 272, mfspr(272));
-	printf("\n%04x %08x ", 273, mfspr(273));
-	printf("\n%04x %08x ", 274, mfspr(274));
-	printf("\n%04x %08x ", 275, mfspr(275));
-	printf("\n%04x %08x ", 260, mfspr(260));
-	printf("\n%04x %08x ", 276, mfspr(276));
-	printf("\n%04x %08x ", 261, mfspr(261));
-	printf("\n%04x %08x ", 277, mfspr(277));
-	printf("\n%04x %08x ", 262, mfspr(262));
-	printf("\n%04x %08x ", 278, mfspr(278));
-	printf("\n%04x %08x ", 263, mfspr(263));
-	printf("\n%04x %08x ", 279, mfspr(279));
-	printf("\n%04x %08x ", 26, mfspr(26));
-	printf("\n%04x %08x ", 27, mfspr(27));
-	printf("\n%04x %08x ", 990, mfspr(990));
-	printf("\n%04x %08x ", 991, mfspr(991));
-	printf("\n%04x %08x ", 956, mfspr(956));
-	printf("\n%04x %08x ", 284, mfspr(284));
-	printf("\n%04x %08x ", 285, mfspr(285));
-	printf("\n%04x %08x ", 986, mfspr(986));
-	printf("\n%04x %08x ", 984, mfspr(984));
-	printf("\n%04x %08x ", 256, mfspr(256));
-	printf("\n%04x %08x ", 1, mfspr(1));
-	printf("\n%04x %08x ", 944, mfspr(944));
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpspr,	1,	1,	do_dumpspr,
-	"dumpspr - Dump all SPR registers\n",
-	NULL
-);
-
-
-#define PCI0_BRDGOPT1 0x4a
-#define plb0_acr      0x87
-
-int do_getplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short val;
-
-	printf("PLB0_ACR=%08lx\n", get_dcr(0x87));
-	pci_read_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, &val);
-	printf("PCI0_BRDGOPT1=%04x\n", val);
-	printf("CCR0=%08x\n", mfspr(ccr0));
-
-	return 0;
-}
-U_BOOT_CMD(
-	getplb,	1,	1,	do_getplb,
-	"getplb  - Dump all plb arbiter registers\n",
-	NULL
-);
-
-int do_setplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int my_acr;
-	unsigned int my_brdgopt1;
-	unsigned int my_ccr0;
-
-	my_acr = simple_strtol (argv[1], NULL, 16);
-	my_brdgopt1 = simple_strtol (argv[2], NULL, 16);
-	my_ccr0 = simple_strtol (argv[3], NULL, 16);
-
-	mtdcr(plb0_acr, my_acr);
-	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, my_brdgopt1);
-	mtspr(ccr0, my_ccr0);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setplb,	4,	1,	do_setplb,
-	"setplb  - Set all plb arbiter registers\n",
-	"PLB0_ACR PCI0_BRDGOPT1 CCR0\n"
-	"        - Set all plb arbiter registers\n"
-);
-
-
-/***********************************************************************
- *
- * The following code is only for test purposes!!!!
- * Please ignore this ugly stuff!!!!!!!!!!!!!!!!!!!
- *
- ***********************************************************************/
-
-#define PCI_ADDR 0xc0000000
-
-int do_writepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-	int test_pci_read = 0;
-	int test_pci_cfg_write = 0;
-	int test_sync = 0;
-	int test_pci_pre_read = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	val = *(ulong *)0x00000000;
-	if (val & 0x00000008) {
-		test_pci_pre_read = 1;
-		printf("Running test with pre pci-memory-read access!\n");
-	}
-	if (val & 0x00000004) {
-		test_sync = 1;
-		printf("Running test with sync instruction!\n");
-	}
-	if (val & 0x00000001) {
-		test_pci_read = 1;
-		printf("Running test with pci-memory-read access!\n");
-	}
-	if (val & 0x00000002) {
-		test_pci_cfg_write = 1;
-		printf("Running test with pci-config-write access!\n");
-	}
-
-	while (1) {
-
-		if (test_pci_pre_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		/*
-		 * Write some values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		for (i=0; i<max; i++) {
-			*ptr++ = i;
-		}
-
-		if (test_sync) {
-			/*
-			 * Sync previous writes
-			 */
-			ppcSync();
-		}
-
-		if (test_pci_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		if (test_pci_cfg_write) {
-			/*
-			 * Generate IRQ to host via config regs
-			 */
-			pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00);
-		}
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci,	4,	1,	do_writepci,
-	"writepci - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-#define PCI_CFGADDR        0xeec00000
-#define PCI_CFGDATA        0xeec00004
-
-int ibmPciConfigWrite
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 0 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci2,	4,	1,	do_writepci2,
-	"writepci2- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writepci22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax = 0;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci22,	4,	1,	do_writepci22,
-	"writepci22- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int ibmPciConfigWrite3
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 1 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci3,	4,	1,	do_writepci3,
-	"writepci3- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-#define SECTOR_SIZE	32		/* 32 byte cache line */
-#define SECTOR_MASK	0x1F
-
-void my_flush_dcache(ulong lcl_addr, ulong count)
-{
-  unsigned int lcl_target;
-
-  /* promote to nearest cache sector */
-  lcl_target =  (lcl_addr + count + SECTOR_SIZE - 1) & ~SECTOR_MASK;
-  lcl_addr &= ~SECTOR_MASK;
-  while (lcl_addr != lcl_target)
-    {
-      /*      ppcDcbf((void *)lcl_addr);*/
-      __asm__("dcbf 0,%0": :"r" (lcl_addr));
-      lcl_addr += SECTOR_SIZE;
-    }
-  __asm__("sync");		/* Always flush prefetch queue in any case */
-}
-
-int do_writepci_cache(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	i = 0;
-
-	/*
-	 * Set pci region as cachable
-	 */
-	ppcSync();
-	__asm__ volatile ("	addis	4,0,0x0000 ");
-	__asm__ volatile ("	addi	4,4,0x0080 ");
-	__asm__ volatile ("	mtdccr	4 ");
-	ppcSync();
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		printf("A\n"); /* test-only */
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		printf("B\n"); /* test-only */
-		my_flush_dcache(addr, 32);
-		printf("C\n"); /* test-only */
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-		printf("D\n"); /* test-only */
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-		printf("E\n"); /* test-only */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci_cache,	4,	1,	do_writepci_cache,
-	"writepci_cache - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_savepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Save own pci configuration in PRAM
-	 */
-	memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
-	ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-	for (i=0; i<0x40; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
-	}
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	*ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
-
-	printf("\nStoring PCI Configuration Regs...\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	savepci,	4,	1,	do_savepci,
-	"savepci  - Save all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_restorepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Rewrite pci config regs (only after soft-reset with magic set)
-	 */
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) {
-		puts("Restoring PCI Configurations Regs!\n");
-		ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-		for (i=0; i<0x40; i+=4) {
-			pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
-		}
-	}
-	mtdcr(uicsr, 0xFFFFFFFF);        /* clear all ints */
-
-	return 0;
-}
-U_BOOT_CMD(
-	restorepci,	4,	1,	do_restorepci,
-	"restorepci  - Restore all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-extern void write_without_sync(void);
-extern void write_with_sync(void);
-extern void write_with_less_sync(void);
-extern void write_with_more_sync(void);
-
-/*
- * code from IBM-PPCSUPP
- */
-int do_writeibm1(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_without_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm1,	4,	1,	do_writeibm1,
-	"writeibm1- Write some data to pcibus (without sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm2,	4,	1,	do_writeibm2,
-	"writeibm2- Write some data to pcibus (with sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_less_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm22,	4,	1,	do_writeibm22,
-	"writeibm22- Write some data to pcibus (with less sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_more_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm3,	4,	1,	do_writeibm3,
-	"writeibm3- Write some data to pcibus (with more sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
 #endif