arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>

44 files changed, 0 insertions, 1408 deletions

diff --git a/board/davinci/dm355evm/Kconfig b/board/davinci/dm355evm/Kconfig
deleted file mode 100644
index ec2c27623de..00000000000
--- a/board/davinci/dm355evm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_DM355EVM
-
-config SYS_BOARD
-	default "dm355evm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_dm355evm"
-
-endif
diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS
deleted file mode 100644
index c017e097178..00000000000
--- a/board/davinci/dm355evm/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DM355EVM BOARD
-#M:	Sandeep Paulraj <s-paulraj@ti.com>
-S:	Orphan (since 2014-08)
-F:	board/davinci/dm355evm/
-F:	include/configs/davinci_dm355evm.h
-F:	configs/davinci_dm355evm_defconfig
diff --git a/board/davinci/dm355evm/Makefile b/board/davinci/dm355evm/Makefile
deleted file mode 100644
index bcb7e6fed54..00000000000
--- a/board/davinci/dm355evm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dm355evm.o
diff --git a/board/davinci/dm355evm/config.mk b/board/davinci/dm355evm/config.mk
deleted file mode 100644
index 9a063000c32..00000000000
--- a/board/davinci/dm355evm/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Spectrum Digital DM355 EVM board
-#	dm355evm board has 1 bank of 128 MB DDR RAM
-#	Physical Address: 8000'0000 to 8800'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c
deleted file mode 100644
index e5a958f7e0c..00000000000
--- a/board/davinci/dm355evm/dm355evm.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-#include <net.h>
-#include <netdev.h>
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * With the DM355 EVM, u-boot is *always* a third stage loader,
- * unless a JTAG debugger handles the first two stages:
- *
- *   - 1st stage is ROM Boot Loader (RBL), which searches for a
- *     second stage loader in one of three places based on SW7:
- *     NAND (with MMC/SD fallback), MMC/SD, or UART.
- *
- *   - 2nd stage is User Boot Loader (UBL), using at most 30KB
- *     of on-chip SRAM, responsible for lowlevel init, and for
- *     loading the third stage loader into DRAM.
- *
- *   - 3rd stage, that's us!
- */
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* We expect the UBL to have handled "lowlevel init", which
-	 * involves setting up at least:
-	 *  - clocks
-	 *      + PLL1 (for ARM and peripherals) and PLL2 (for DDR)
-	 *      + clock divisors for those PLLs
-	 *      + LPSC_DDR module enabled
-	 *      + LPSC_TIMER0 module (still) enabled
-	 *  - EMIF
-	 *      + DDR init and timings
-	 *      + AEMIF timings (for NAND and DM9000)
-	 *  - pinmux
-	 *
-	 * Some of that is repeated here, mostly as a precaution.
-	 */
-
-	/* AEMIF:  Some "address" lines are available as GPIOs.  A3..A13
-	 * could be too if we used A12 as a GPIO during NAND chipselect
-	 * (and Linux did too), letting us control the LED on A7/GPIO61.
-	 */
-	REG(PINMUX2) = 0x0c08;
-
-	/* UART0 may still be in SyncReset if we didn't boot from UART */
-	davinci_enable_uart0();
-
-	/* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */
-	lpsc_on(DAVINCI_LPSC_TPCC);
-	lpsc_on(DAVINCI_LPSC_TPTC0);
-	lpsc_on(DAVINCI_LPSC_TPTC1);
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-
-static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip	*this = mtd->priv;
-	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
-	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
-
-	if (chip == 1) {
-		__set_bit(14, &wbase);
-		__set_bit(14, &rbase);
-	} else {
-		__clear_bit(14, &wbase);
-		__clear_bit(14, &rbase);
-	}
-	this->IO_ADDR_W = (void *)wbase;
-	this->IO_ADDR_R = (void *)rbase;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-	nand->select_chip = nand_dm355evm_select_chip;
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.input_clk	= 108000000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_1,
-};
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-static struct davinci_mmc mmc_sd1 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
-	.input_clk	= 108000000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_1,
-};
-#endif
-
-int board_mmc_init(bd_t *bis)
-{
-	int err;
-
-	/* Add slot-0 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd0);
-	if (err)
-		return err;
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-	/* Add slot-1 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd1);
-#endif
-
-	return err;
-}
-#endif
diff --git a/board/davinci/dm355leopard/Kconfig b/board/davinci/dm355leopard/Kconfig
deleted file mode 100644
index ab4230a637a..00000000000
--- a/board/davinci/dm355leopard/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_DM355LEOPARD
-
-config SYS_BOARD
-	default "dm355leopard"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_dm355leopard"
-
-endif
diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS
deleted file mode 100644
index ed04d4354bd..00000000000
--- a/board/davinci/dm355leopard/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DM355LEOPARD BOARD
-#M:	Sandeep Paulraj <s-paulraj@ti.com>
-S:	Orphan (since 2014-08)
-F:	board/davinci/dm355leopard/
-F:	include/configs/davinci_dm355leopard.h
-F:	configs/davinci_dm355leopard_defconfig
diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile
deleted file mode 100644
index 7035429c921..00000000000
--- a/board/davinci/dm355leopard/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dm355leopard.o
diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk
deleted file mode 100644
index 28ff3f3d97f..00000000000
--- a/board/davinci/dm355leopard/config.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c
deleted file mode 100644
index 53902f996c7..00000000000
--- a/board/davinci/dm355leopard/dm355leopard.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-#include <net.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	struct davinci_gpio *gpio01_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
-	struct davinci_gpio *gpio23_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK23;
-	struct davinci_gpio *gpio67_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
-
-	gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* GIO 9 & 10 are used for IO */
-	writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3);
-
-	/* Interrupt set GIO 9 */
-	writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN);
-
-	/* set GIO 9 input */
-	writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir);
-
-	/* Both edge trigger GIO 9 */
-	writel((readl(&gpio01_base->set_rising) | (1 << 9)),
-						&gpio01_base->set_rising);
-	writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir);
-
-	/* output low */
-	writel((readl(&gpio01_base->set_data) & ~(1 << 5)),
-						&gpio01_base->set_data);
-
-	/* set GIO 10 output */
-	writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir);
-
-	/* output high */
-	writel((readl(&gpio01_base->set_data) | (1 << 10)),
-						&gpio01_base->set_data);
-
-	/* set GIO 32 output */
-	writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir);
-
-	/* output High */
-	writel((readl(&gpio23_base->set_data) | (1 << 0)),
-						&gpio23_base->set_data);
-
-	/* Enable UART1 MUX Lines */
-	writel((readl(PINMUX0) & ~3), PINMUX0);
-	writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir);
-	writel((readl(&gpio67_base->set_data) | (1 << 6)),
-						&gpio67_base->set_data);
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif
diff --git a/board/davinci/dm365evm/Kconfig b/board/davinci/dm365evm/Kconfig
deleted file mode 100644
index 724c7b6204c..00000000000
--- a/board/davinci/dm365evm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_DM365EVM
-
-config SYS_BOARD
-	default "dm365evm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_dm365evm"
-
-endif
diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS
deleted file mode 100644
index 97c3ed3b69d..00000000000
--- a/board/davinci/dm365evm/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DM365EVM BOARD
-#M:	Sandeep Paulraj <s-paulraj@ti.com>
-S:	Orphan (since 2014-08)
-F:	board/davinci/dm365evm/
-F:	include/configs/davinci_dm365evm.h
-F:	configs/davinci_dm365evm_defconfig
diff --git a/board/davinci/dm365evm/Makefile b/board/davinci/dm365evm/Makefile
deleted file mode 100644
index d35d81c2bfd..00000000000
--- a/board/davinci/dm365evm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dm365evm.o
diff --git a/board/davinci/dm365evm/config.mk b/board/davinci/dm365evm/config.mk
deleted file mode 100644
index 7b1e900e8c6..00000000000
--- a/board/davinci/dm365evm/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Spectrum Digital DM365 EVM board
-#	DM365 EVM board has 1 bank of 128 MB DDR RAM
-#	Physical Address: 8000'0000 to 8800'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
deleted file mode 100644
index 24bec56d568..00000000000
--- a/board/davinci/dm365evm/dm365evm.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/gpio.h>
-#include <netdev.h>
-#include <asm/arch/davinci_misc.h>
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM365_EVM;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-int board_eth_init(bd_t *bis)
-{
-	uint8_t eeprom_enetaddr[6];
-	int i;
-	struct davinci_gpio *gpio1_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
-
-	/* Configure PINMUX 3 to enable EMAC pins */
-	writel((readl(PINMUX3) | 0x1affff), PINMUX3);
-
-	/* Configure GPIO20 as output */
-	writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir);
-
-	/* Toggle GPIO 20 */
-	for (i = 0; i < 20; i++) {
-		/* GPIO 20 low */
-		writel((readl(&gpio1_base->out_data) & ~(1 << 20)),
-						&gpio1_base->out_data);
-
-		udelay(1000);
-
-		/* GPIO 20 high */
-		writel((readl(&gpio1_base->out_data) | (1 << 20)),
-						&gpio1_base->out_data);
-	}
-
-	/* Configure I2C pins so that EEPROM can be read */
-	writel((readl(PINMUX3) | 0x01400000), PINMUX3);
-
-	/* Read Ethernet MAC address from EEPROM */
-	if (dvevm_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	davinci_emac_initialize();
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip	*this = mtd->priv;
-	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
-	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
-
-	if (chip == 1) {
-		__set_bit(14, &wbase);
-		__set_bit(14, &rbase);
-	} else {
-		__clear_bit(14, &wbase);
-		__clear_bit(14, &rbase);
-	}
-	this->IO_ADDR_W = (void *)wbase;
-	this->IO_ADDR_R = (void *)rbase;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-	nand->select_chip = nand_dm365evm_select_chip;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.input_clk	= 121500000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-static struct davinci_mmc mmc_sd1 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
-	.input_clk	= 121500000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_2,
-};
-#endif
-
-int board_mmc_init(bd_t *bis)
-{
-	int err;
-
-	/* Add slot-0 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd0);
-	if (err)
-		return err;
-
-#ifdef CONFIG_DAVINCI_MMC_SD1
-#define PUPDCTL1		0x01c4007c
-	/* PINMUX(4)-DAT0-3/CMD;  PINMUX(0)-CLK */
-	writel((readl(PINMUX4) | 0x55400000), PINMUX4);
-	writel((readl(PINMUX0) | 0x00010000), PINMUX0);
-
-	/* Configure MMC/SD pins as pullup */
-	writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1);
-
-	/* Add slot-1 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd1);
-#endif
-
-	return err;
-}
-#endif
diff --git a/board/davinci/dm6467evm/Kconfig b/board/davinci/dm6467evm/Kconfig
deleted file mode 100644
index 56d2ab487d6..00000000000
--- a/board/davinci/dm6467evm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_DM6467EVM
-
-config SYS_BOARD
-	default "dm6467evm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_dm6467evm"
-
-endif
diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS
deleted file mode 100644
index 8ca53c43c80..00000000000
--- a/board/davinci/dm6467evm/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-DM6467EVM BOARD
-#M:	Sandeep Paulraj <s-paulraj@ti.com>
-S:	Orphan (since 2014-08)
-F:	board/davinci/dm6467evm/
-F:	include/configs/davinci_dm6467evm.h
-F:	configs/davinci_dm6467evm_defconfig
-F:	configs/davinci_dm6467Tevm_defconfig
diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile
deleted file mode 100644
index acbbdd50323..00000000000
--- a/board/davinci/dm6467evm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dm6467evm.o
diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk
deleted file mode 100644
index 37510438900..00000000000
--- a/board/davinci/dm6467evm/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c
deleted file mode 100644
index e51cc9e6389..00000000000
--- a/board/davinci/dm6467evm/dm6467evm.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define REV_DM6467EVM		0
-#define REV_DM6467TEVM		1
-/*
- * get_board_rev() - setup to pass kernel board revision information
- * Returns:
- * bit[0-3]	System clock frequency
- * 0000b	- 27 MHz
- * 0001b	- 33 MHz
- */
-u32 get_board_rev(void)
-{
-
-#ifdef CONFIG_DAVINCI_DM6467TEVM
-	return REV_DM6467TEVM;
-#else
-	return REV_DM6467EVM;
-#endif
-
-}
-
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	lpsc_on(DAVINCI_DM646X_LPSC_TIMER0);
-	lpsc_on(DAVINCI_DM646X_LPSC_UART0);
-	lpsc_on(DAVINCI_DM646X_LPSC_I2C);
-	lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
-
-	/* Enable GIO3.3V cells used for EMAC */
-	REG(VDD3P3V_PWDN) = 0x80000c0;
-
-	/* Select UART function on UART0 */
-	REG(PINMUX0) &= ~(0x0000003f << 18);
-	REG(PINMUX1) &= ~(0x00000003);
-
-	return 0;
-}
-
-#if defined(CONFIG_DRIVER_TI_EMAC)
-
-int board_eth_init(bd_t *bis)
-{
-	if (!davinci_emac_initialize()) {
-		printf("Error: Ethernet init failed!\n");
-		return -1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif
diff --git a/board/davinci/dvevm/Kconfig b/board/davinci/dvevm/Kconfig
deleted file mode 100644
index 3f0ef822157..00000000000
--- a/board/davinci/dvevm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_DVEVM
-
-config SYS_BOARD
-	default "dvevm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_dvevm"
-
-endif
diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS
deleted file mode 100644
index a718b900508..00000000000
--- a/board/davinci/dvevm/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DVEVM BOARD
-#M:	-
-S:	Maintained
-F:	board/davinci/dvevm/
-F:	include/configs/davinci_dvevm.h
-F:	configs/davinci_dvevm_defconfig
diff --git a/board/davinci/dvevm/Makefile b/board/davinci/dvevm/Makefile
deleted file mode 100644
index 7ade3259683..00000000000
--- a/board/davinci/dvevm/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dvevm.o
-obj-y	+= board_init.o
diff --git a/board/davinci/dvevm/board_init.S b/board/davinci/dvevm/board_init.S
deleted file mode 100644
index ded0590084f..00000000000
--- a/board/davinci/dvevm/board_init.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Board-specific low level initialization code. Called at the very end
- * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-
-	mov	pc, lr
diff --git a/board/davinci/dvevm/config.mk b/board/davinci/dvevm/config.mk
deleted file mode 100644
index ed807072313..00000000000
--- a/board/davinci/dvevm/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
deleted file mode 100644
index c34bde4fa60..00000000000
--- a/board/davinci/dvevm/dvevm.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Configure AEMIF pins (although this should be configured at boot time
-	 * with pull-up/pull-down resistors) */
-	REG(PINMUX0) = 0x00000c1f;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-	lpsc_on(DAVINCI_LPSC_USB);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	uint8_t video_mode;
-	uint8_t eeprom_enetaddr[6];
-
-	/* Read Ethernet MAC address from EEPROM if available. */
-	if (dvevm_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	i2c_read(0x39, 0x00, 1, &video_mode, 1);
-
-	setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc"));
-
-	return(0);
-}
-
-#ifdef CONFIG_USB_DAVINCI
-
-/* IO Expander I2C address and USB VBUS enable mask */
-#define IOEXP_I2C_ADDR 0x3A
-#define IOEXP_VBUSEN_MASK 1
-
-/*
- * This function enables USB VBUS by writting to IO expander using I2C.
- * Note that the I2C is already initialized at this stage. This
- * function is used by davinci specific USB wrapper code.
- */
-void enable_vbus(void)
-{
-	uchar data;  /* IO Expander data to enable VBUS */
-
-	/* Write to IO expander to enable VBUS */
-	i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1);
-	data &= ~IOEXP_VBUSEN_MASK;
-	i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1);
-}
-#endif
diff --git a/board/davinci/schmoogie/Kconfig b/board/davinci/schmoogie/Kconfig
deleted file mode 100644
index 35810755f96..00000000000
--- a/board/davinci/schmoogie/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_SCHMOOGIE
-
-config SYS_BOARD
-	default "schmoogie"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_schmoogie"
-
-endif
diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS
deleted file mode 100644
index 808e7fc0468..00000000000
--- a/board/davinci/schmoogie/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SCHMOOGIE BOARD
-#M:	-
-S:	Maintained
-F:	board/davinci/schmoogie/
-F:	include/configs/davinci_schmoogie.h
-F:	configs/davinci_schmoogie_defconfig
diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile
deleted file mode 100644
index e170d551ff2..00000000000
--- a/board/davinci/schmoogie/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= schmoogie.o
-obj-y	+= board_init.o
diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S
deleted file mode 100644
index ded0590084f..00000000000
--- a/board/davinci/schmoogie/board_init.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Board-specific low level initialization code. Called at the very end
- * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-
-	mov	pc, lr
diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk
deleted file mode 100644
index ed807072313..00000000000
--- a/board/davinci/schmoogie/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
deleted file mode 100644
index 741afc4df3f..00000000000
--- a/board/davinci/schmoogie/schmoogie.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Configure AEMIF pins (although this should be configured at boot time
-	 * with pull-up/pull-down resistors) */
-	REG(PINMUX0) = 0x00000c1f;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	u_int8_t	tmp[20], buf[10];
-	int		i = 0;
-
-	/* Set serial number from UID chip */
-	const u_int8_t	crc_tbl[256] = {
-			0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83,
-			0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41,
-			0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e,
-			0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc,
-			0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0,
-			0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62,
-			0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d,
-			0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff,
-			0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5,
-			0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07,
-			0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58,
-			0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a,
-			0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6,
-			0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24,
-			0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b,
-			0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9,
-			0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f,
-			0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd,
-			0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92,
-			0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50,
-			0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c,
-			0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee,
-			0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1,
-			0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73,
-			0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49,
-			0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b,
-			0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4,
-			0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16,
-			0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a,
-			0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8,
-			0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7,
-			0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
-		};
-
-	/* Set serial number from UID chip */
-	if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
-		printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
-		setenv("serial#", "FAILED");
-	} else {
-		if (buf[0] != 0x70) {
-			/* Device Family Code */
-			printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
-			setenv("serial#", "FAILED");
-		}
-	}
-	/* Now check CRC */
-	tmp[0] = 0;
-	for (i = 0; i < 8; i++)
-		tmp[0] = crc_tbl[tmp[0] ^ buf[i]];
-
-	if (tmp[0] != 0) {
-		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR);
-		setenv("serial#", "FAILED");
-	} else {
-		/* CRC OK, set "serial" env variable */
-		sprintf((char *)&tmp[0], "%02x%02x%02x%02x%02x%02x",
-			buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]);
-		setenv("serial#", (char *)&tmp[0]);
-	}
-
-	return(0);
-}
diff --git a/board/davinci/sffsdr/Kconfig b/board/davinci/sffsdr/Kconfig
deleted file mode 100644
index dc48f3118c1..00000000000
--- a/board/davinci/sffsdr/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_SFFSDR
-
-config SYS_BOARD
-	default "sffsdr"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_sffsdr"
-
-endif
diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS
deleted file mode 100644
index 5c7e1324a9f..00000000000
--- a/board/davinci/sffsdr/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SFFSDR BOARD
-#M:	-
-S:	Maintained
-F:	board/davinci/sffsdr/
-F:	include/configs/davinci_sffsdr.h
-F:	configs/davinci_sffsdr_defconfig
diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile
deleted file mode 100644
index 4ab30a4061f..00000000000
--- a/board/davinci/sffsdr/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= sffsdr.o
-obj-y	+= board_init.o
diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S
deleted file mode 100644
index ded0590084f..00000000000
--- a/board/davinci/sffsdr/board_init.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Board-specific low level initialization code. Called at the very end
- * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-
-	mov	pc, lr
diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk
deleted file mode 100644
index 4fe900799dd..00000000000
--- a/board/davinci/sffsdr/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# Copyright (C) 2008 Lyrtech <www.lyrtech.com>
-# Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
-#
-# Lyrtech SFF SDR board (ARM926EJS) cpu
-#
-# SFF SDR board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 87FF'FFFF
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0,
-# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc).
-#
-# we load ourself to 8400'0000 to provide at least 32MB spacing
-# between us and the Integrity kernel image
-CONFIG_SYS_TEXT_BASE = 0x84000000
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
deleted file mode 100644
index f6ab91e6ff5..00000000000
--- a/board/davinci/sffsdr/sffsdr.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-#define DAVINCI_A3CR     (0x01E00014)	/* EMIF-A CS3 config register. */
-#define DAVINCI_A3CR_VAL (0x3FFFFFFD)	/* EMIF-A CS3 value for FPGA. */
-
-#define INTEGRITY_SYSCFG_OFFSET    0x7E8
-#define INTEGRITY_CHECKWORD_OFFSET 0x7F8
-#define INTEGRITY_CHECKWORD_VALUE  0x10ADBEEF
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-/* Read ethernet MAC address from Integrity data structure inside EEPROM.
- * Returns 1 if found, 0 otherwise.
- */
-static int sffsdr_read_mac_address(uint8_t *buf)
-{
-	u_int32_t value, mac[2], address;
-
-	/* Read Integrity data structure checkword. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
-		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
-		goto err;
-	if (value != INTEGRITY_CHECKWORD_VALUE)
-		return 0;
-
-	/* Read SYSCFG structure offset. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
-		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
-		goto err;
-	address = 0x800 + (int) value; /* Address of SYSCFG structure. */
-
-	/* Read NET CONFIG structure offset. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
-		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
-		goto err;
-	address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
-	address += 12; /* Address of NET INTERFACE CONFIG structure. */
-
-	/* Read NET INTERFACE CONFIG 2 structure offset. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
-		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
-		goto err;
-	address = 0x800 + 16 + (int) value;	/* Address of NET INTERFACE
-						 * CONFIG 2 structure. */
-
-	/* Read MAC address. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
-		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
-		goto err;
-
-	buf[0] = mac[0] >> 24;
-	buf[1] = mac[0] >> 16;
-	buf[2] = mac[0] >> 8;
-	buf[3] = mac[0];
-	buf[4] = mac[1] >> 24;
-	buf[5] = mac[1] >> 16;
-
-	return 1; /* Found */
-
-err:
-	printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
-	return 0;
-}
-
-/* Platform dependent initialisation. */
-int misc_init_r(void)
-{
-	uint8_t i2cbuf;
-	uint8_t eeprom_enetaddr[6];
-
-	/* EMIF-A CS3 configuration for FPGA. */
-	REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
-
-	/* Configure I2C switch (PCA9543) to enable channel 0. */
-	i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
-	if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
-		      CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
-		printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR);
-		return 1;
-	}
-
-	/* Read Ethernet MAC address from EEPROM if available. */
-	if (sffsdr_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	return(0);
-}
diff --git a/board/davinci/sonata/Kconfig b/board/davinci/sonata/Kconfig
deleted file mode 100644
index 4440d95bc27..00000000000
--- a/board/davinci/sonata/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_SONATA
-
-config SYS_BOARD
-	default "sonata"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_sonata"
-
-endif
diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS
deleted file mode 100644
index 40659e5210f..00000000000
--- a/board/davinci/sonata/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SONATA BOARD
-#M:	-
-S:	Maintained
-F:	board/davinci/sonata/
-F:	include/configs/davinci_sonata.h
-F:	configs/davinci_sonata_defconfig
diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile
deleted file mode 100644
index 92e1a180c01..00000000000
--- a/board/davinci/sonata/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= sonata.o
-obj-y	+= board_init.o
diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S
deleted file mode 100644
index 0a47ad5ebbd..00000000000
--- a/board/davinci/sonata/board_init.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Board-specific low level initialization code. Called at the very end
- * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer
- * Sonata boards, AFAIK, don't use this so it's just return by default. Ask
- * Visioneering if they reinvented the wheel once again to make sure :)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-#ifdef SONATA_BOARD_GPIOWP
-	/* Set PINMUX0 to enable GPIO4 */
-	ldr	r0, _PINMUX0
-	ldr	r1, GPIO4_EN_MASK
-	ldr	r2, [r0]
-	and	r2, r2, r1
-	str	r2, [r0]
-
-	/* Enable GPIO LPSC module */
-	ldr	r0, PTSTAT
-
-gpio_ptstat_loop1:
-	ldr	r2, [r0]
-	tst	r2, $0x00000001
-	bne	gpio_ptstat_loop1
-
-	ldr	r1, MDCTL_GPIO
-	ldr	r2, [r1]
-	and	r2, r2, $0xfffffff8
-	orr	r2, r2, $0x00000003
-	str	r2, [r1]
-
-	orr	r2, r2, $0x00000200
-	str	r2, [r1]
-
-	ldr	r1, PTCMD
-	mov	r2, $0x00000001
-	str	r2, [r1]
-
-gpio_ptstat_loop2:
-	ldr	r2, [r0]
-	tst	r2, $0x00000001
-	bne	gpio_ptstat_loop2
-
-	ldr	r0, MDSTAT_GPIO
-gpio_mdstat_loop:
-	ldr	r2, [r0]
-	and	r2, r2, $0x0000001f
-	teq	r2, $0x00000003
-	bne	gpio_mdstat_loop
-
-	/* GPIO4 -> output */
-	ldr	r0, GPIO_DIR01
-	mov	r1, $0x10
-	ldr	r2, [r0]
-	bic	r2, r2, r0
-	str	r2, [r0]
-
-	/* Set it to 0 (Write Protect) */
-	ldr	r0, GPIO_CLR_DATA01
-	str	r1, [r0]
-#endif
-
-	mov	pc, lr
-
-#ifdef SONATA_BOARD_GPIOWP
-.ltorg
-
-GPIO4_EN_MASK:
-	.word	0xf77fffff
-MDCTL_GPIO:
-	.word	0x01c41a68
-MDSTAT_GPIO:
-	.word	0x01c41868
-GPIO_DIR01:
-	.word	0x01c67010
-GPIO_CLR_DATA01:
-	.word	0x01c6701c
-#endif
diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk
deleted file mode 100644
index ed807072313..00000000000
--- a/board/davinci/sonata/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
deleted file mode 100644
index f5c3258de56..00000000000
--- a/board/davinci/sonata/sonata.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Configure AEMIF pins (although this should be configured at boot time
-	 * with pull-up/pull-down resistors) */
-	REG(PINMUX0) = 0x00000c1f;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	uint8_t eeprom_enetaddr[6];
-
-	/* Read Ethernet MAC address from EEPROM if available. */
-	if (dvevm_read_mac_address(eeprom_enetaddr))
-		davinci_sync_env_enetaddr(eeprom_enetaddr);
-
-	return(0);
-}
-
-#ifdef CONFIG_NAND_DAVINCI
-
-/* Set WP on deselect, write enable on select */
-static void nand_sonata_select_chip(struct mtd_info *mtd, int chip)
-{
-#define GPIO_SET_DATA01	0x01c67018
-#define GPIO_CLR_DATA01	0x01c6701c
-#define GPIO_NAND_WP	(1 << 4)
-#ifdef SONATA_BOARD_GPIOWP
-	if (chip < 0) {
-		REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP;
-	} else {
-		REG(GPIO_SET_DATA01) |= GPIO_NAND_WP;
-	}
-#endif
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-	nand->select_chip = nand_sonata_select_chip;
-	return 0;
-}
-
-#endif /* CONFIG_NAND_DAVINCI */