diff options
| author | Ben Gardiner <bengardiner@nanometrics.ca> | 2010-10-14 17:26:29 -0400 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2010-10-17 20:14:55 +0200 |
| commit | 3d248d37e1a176326ac8bf6a39144076707530e3 (patch) | |
| tree | ac2bdaf982e350289ae246588f73353a8120ef6f /board | |
| parent | 771d028afff6d223f2e9cf7ed8328eb2287f4303 (diff) | |
da850evm: basic MII EMAC support
The current da850evm support in u-boot/master omits any use of
the davinci EMAC. This patch adds basic support for the EMAC using
the MII PHY found on the baseboard of the EVM. The MAC address is
read from the environment variable 'ethadd'. Note that this is
different from the da850evm support in the u-boot omapl1 tree
where the MAC address is read from SPI flash.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Sandeep Paulraj <s-paulraj@ti.com>
CC: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/davinci/da8xxevm/da850evm.c | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 0eb9e29ea35..c8c5e1b30ed 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -23,8 +23,11 @@ #include <common.h> #include <i2c.h> +#include <net.h> +#include <netdev.h> #include <asm/arch/hardware.h> #include <asm/arch/emif_defs.h> +#include <asm/arch/emac_defs.h> #include <asm/io.h> #include "../common/misc.h" #include "common.h" @@ -49,6 +52,28 @@ static const struct pinmux_config uart_pins[] = { { pinmux(4), 2, 5 } }; +#ifdef CONFIG_DRIVER_TI_EMAC +static const struct pinmux_config emac_pins[] = { + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(2), 8, 6 }, + { pinmux(2), 8, 7 }, + { pinmux(3), 8, 0 }, + { pinmux(3), 8, 1 }, + { pinmux(3), 8, 2 }, + { pinmux(3), 8, 3 }, + { pinmux(3), 8, 4 }, + { pinmux(3), 8, 5 }, + { pinmux(3), 8, 6 }, + { pinmux(3), 8, 7 }, + { pinmux(4), 8, 0 }, + { pinmux(4), 8, 1 } +}; +#endif /* CONFIG_DRIVER_TI_EMAC */ + /* I2C pin muxer settings */ static const struct pinmux_config i2c_pins[] = { { pinmux(4), 2, 2 }, @@ -142,6 +167,14 @@ int board_init(void) if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) return 1; +#ifdef CONFIG_DRIVER_TI_EMAC + if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) + return 1; + /* set cfgchip3 to select MII */ + writel(readl(&davinci_syscfg_regs->cfgchip3) & ~(1 << 8), + &davinci_syscfg_regs->cfgchip3); +#endif /* CONFIG_DRIVER_TI_EMAC */ + /* enable the console UART */ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | DAVINCI_UART_PWREMU_MGMT_UTRST), @@ -149,3 +182,19 @@ int board_init(void) return 0; } + +#ifdef CONFIG_DRIVER_TI_EMAC + +/* + * Initializes on-board ethernet controllers. + */ +int board_eth_init(bd_t *bis) +{ + if (!davinci_emac_initialize()) { + printf("Error: Ethernet init failed!\n"); + return -1; + } + + return 0; +} +#endif /* CONFIG_DRIVER_TI_EMAC */ |