summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2012-09-21 14:53:13 -0700
committerTom Rini <trini@ti.com>2012-09-21 14:53:13 -0700
commit495dbd72dd1172de866ba323263a5b62cf454972 (patch)
tree3ecfb8ae44c871055115941890fd93f175f8761d /board
parent50d924b45911b24eeb7623bed11b9297d99b840a (diff)
parentd193c1b6eb05041c94ad9aacd8c94189d1dbc5f8 (diff)
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'board')
-rw-r--r--board/BuS/eb_cpux9k2/cpux9k2.c6
-rw-r--r--board/Marvell/sheevaplug/kwbimage.cfg4
-rw-r--r--board/avionic-design/common/tamonten.c2
-rw-r--r--board/avionic-design/dts/tegra20-tec.dts11
-rw-r--r--board/buffalo/lsxl/lsxl.c22
-rw-r--r--board/compal/paz00/paz00.c4
-rw-r--r--board/compulab/trimslice/trimslice.c4
-rw-r--r--board/freescale/mx28evk/iomux.c2
-rw-r--r--board/freescale/mx28evk/mx28evk.c4
-rw-r--r--board/freescale/mx35pdk/README78
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c25
-rw-r--r--board/freescale/mx6qsabrelite/mx6qsabrelite.c24
-rw-r--r--board/genesi/mx51_efikamx/Makefile6
-rw-r--r--board/genesi/mx51_efikamx/efikamx-usb.c12
-rw-r--r--board/genesi/mx51_efikamx/efikamx.c3
-rw-r--r--board/keymile/common/ivm.c2
-rw-r--r--board/keymile/km_arm/km_arm.c20
-rw-r--r--board/nvidia/common/board.c8
-rw-r--r--board/nvidia/dts/tegra20-harmony.dts10
-rw-r--r--board/nvidia/dts/tegra20-seaboard.dts10
-rw-r--r--board/nvidia/harmony/Makefile4
-rw-r--r--board/nvidia/harmony/harmony.c4
-rw-r--r--board/nvidia/seaboard/Makefile4
-rw-r--r--board/nvidia/seaboard/seaboard.c4
-rw-r--r--board/nvidia/ventana/Makefile4
-rw-r--r--board/nvidia/whistler/Makefile4
-rw-r--r--board/nvidia/whistler/whistler.c4
-rw-r--r--board/taskit/stamp9g20/stamp9g20.c21
-rw-r--r--board/technexion/twister/twister.c10
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.c113
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.h80
31 files changed, 303 insertions, 206 deletions
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index 776226fcb3b..e98244b5ed5 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -267,9 +267,9 @@ int drv_video_init(void)
display_height = 256;
printf("%ld x %ld pixel matrix\n", display_width, display_height);
- /* RWH = 7 | RWS =7 | TDF = 15 | NWS = 0x7F */
- csr = AT91_SMC_CSR_RWHOLD(7) | AT91_SMC_CSR_RWSETUP(7) |
- AT91_SMC_CSR_TDF(15) | AT91_SMC_CSR_NWS(127) |
+ /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */
+ csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
+ AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
writel(csr, &mc->smc.csr[2]);
diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg
index 3b9c53f57f2..55be3a3b32b 100644
--- a/board/Marvell/sheevaplug/kwbimage.cfg
+++ b/board/Marvell/sheevaplug/kwbimage.cfg
@@ -21,8 +21,8 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
-# and create kirkwood boot image
+# Refer to doc/README.kwbimage for more details about how-to
+# configure and create kirkwood boot images.
#
# Boot Media configurations
diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
index a0a4d1d07dd..93f12ea4f19 100644
--- a/board/avionic-design/common/tamonten.c
+++ b/board/avionic-design/common/tamonten.c
@@ -78,7 +78,7 @@ int board_mmc_init(bd_t *bd)
pin_mux_mmc();
/* init dev 0, SD slot, with 4-bit bus */
- tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
return 0;
}
diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts
index 9faebd8bc66..bb3851b57d1 100644
--- a/board/avionic-design/dts/tegra20-tec.dts
+++ b/board/avionic-design/dts/tegra20-tec.dts
@@ -55,4 +55,15 @@
usb@c5004000 {
status = "disabled";
};
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+ nvidia,width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+
+ nand@0 {
+ reg = <0>;
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ };
+ };
};
diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c
index fe155112c9e..b3f31d6b697 100644
--- a/board/buffalo/lsxl/lsxl.c
+++ b/board/buffalo/lsxl/lsxl.c
@@ -158,7 +158,7 @@ static void set_led(int state)
{
switch (state) {
case LED_OFF:
- __set_led(0, 0, 0, 0, 0, 0);
+ __set_led(0, 0, 0, 1, 1, 1);
break;
case LED_ALARM_ON:
__set_led(0, 0, 0, 0, 1, 1);
@@ -192,6 +192,25 @@ int board_init(void)
}
#ifdef CONFIG_MISC_INIT_R
+static void check_power_switch(void)
+{
+ if (kw_gpio_get_value(GPIO_POWER_SWITCH)) {
+ /* turn off HDD and USB power */
+ kw_gpio_set_value(GPIO_HDD_POWER, 0);
+ kw_gpio_set_value(GPIO_USB_VBUS, 0);
+ set_led(LED_OFF);
+
+ /* loop until released */
+ while (kw_gpio_get_value(GPIO_POWER_SWITCH))
+ ;
+
+ /* turn power on again */
+ kw_gpio_set_value(GPIO_HDD_POWER, 1);
+ kw_gpio_set_value(GPIO_USB_VBUS, 1);
+ set_led(LED_POWER_BLINKING);
+ }
+}
+
void check_enetaddr(void)
{
uchar enetaddr[6];
@@ -261,6 +280,7 @@ static void check_push_button(void)
int misc_init_r(void)
{
+ check_power_switch();
check_enetaddr();
check_push_button();
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
index cd684f29263..0f8f1670172 100644
--- a/board/compal/paz00/paz00.c
+++ b/board/compal/paz00/paz00.c
@@ -70,11 +70,11 @@ int board_mmc_init(bd_t *bd)
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, -1, -1);
+ tegra_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 3, SD slot, with 4-bit bus */
- tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
+ tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
return 0;
}
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
index 5dae15b962f..893cca8c19b 100644
--- a/board/compulab/trimslice/trimslice.c
+++ b/board/compulab/trimslice/trimslice.c
@@ -69,10 +69,10 @@ int board_mmc_init(bd_t *bd)
pin_mux_mmc();
/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
- tegra20_mmc_init(0, 4, -1, GPIO_PP1);
+ tegra_mmc_init(0, 4, -1, GPIO_PP1);
/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
- tegra20_mmc_init(3, 4, -1, -1);
+ tegra_mmc_init(3, 4, -1, -1);
return 0;
}
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
index 16a6d8ad230..ae6eda343ed 100644
--- a/board/freescale/mx28evk/iomux.c
+++ b/board/freescale/mx28evk/iomux.c
@@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = {
#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \
ADDR_PINS << 8 | APREBIT)
-void mx28_adjust_memory_params(uint32_t *dram_vals)
+void mxs_adjust_memory_params(uint32_t *dram_vals)
{
dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
}
diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index 867d3c8518f..d782aea61b8 100644
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -49,8 +49,8 @@ int board_early_init_f(void)
/* SSP0 clock at 96MHz */
mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
#ifdef CONFIG_CMD_USB
mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README
index 3d69ed5839c..7232b533574 100644
--- a/board/freescale/mx35pdk/README
+++ b/board/freescale/mx35pdk/README
@@ -71,91 +71,17 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf
Flashing U-Boot
--------------------------------
-There are two options: the original bootloader in NAND can be replaced with
-u-boot, or u-boot can be stored on the NOR flash without erasing
-the delivered bootloader.
+U-boot should be stored on the NOR flash.
+
The boot storage can be select using the switches on the personality board
(SW1-SW2) and on the DEBUG board (SW4-SW10).
-The second option is to be preferred if you have not a JTAG debugger.
If something goes wrong flashing the bootloader, it is always possible to
recover the board booting from the other device.
-Replacing the bootloader on the NAND
---------------------------------------
-To replace RedBoot with U-Boot, the easy way is to do this in linux.
-Start the kernel with the suggested options. Make sure to have set the
-mtdparts exactly as described, because this matches the layout on the
-mx35pdk.
-
-You should see in your boot log the following entries for the NAND
-flash:
-
-5 cmdlinepart partitions found on MTD device mxc_nand
-Creating 5 MTD partitions on "mxc_nand":
-0x000000000000-0x000000100000 : "boot"
-0x000000100000-0x000000600000 : "linux"
-0x000000600000-0x000006600000 : "root"
-0x000006600000-0x000006e00000 : "cfg"
-0x000006e00000-0x000080000000 : "user"
-
-You can use the utilities flash_eraseall and nandwrite to put
-u-boot on the NAND. The bootloader is marked as "boot", and 1MB is
-reserved. If everything is correct, this partition is accessed as
-/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and
-get the device node from the partition name:
-
-$ cat /proc/mtd | grep boot
-
-I suggest you try the utilities on a different partition to be sure
-if everything works correctly. If not, and you remove RedBoot, you have to
-reinstall it using the ATK tool as suggested by Freescale, or using a
-JTAG debugger.
-
-I report the versions of the utilities I used (they are provided with ELDK):
-
--bash-3.2# nandwrite --version
-nandwrite $Revision: 1.32 $
-
-flash_eraseall --version
-flash_eraseall $Revision: 1.22 $
-
-nandwrite reports a warning if the file to be saved is not sector aligned.
-This should have no consequences, but I preferred to pad u-boot.bin
-to get no problem at all.
-$ dd if=/dev/zero of=zeros bs=1 count=74800
-$ cat u-boot.bin zeros > u-boot-padded.bin
-
-To erase the partition:
-$ flash_eraseall /dev/mtd4
-
-Writing u-boot:
-
-$ nandwrite /dev/mtd4 u-boot-padded.bin
-
-Now U-Boot is stored on the booting partition.
-
-To boot from NAND, you have to select the switches as follows:
-
-Personality board
- SW2 1, 4, 5 on
- 2, 3, 6, 7, 8 off
- SW1 all off
-
-Debug Board:
- SW5 0
- SW6 0
- SW7 0
- SW8 1
- SW9 1
- SW10 0
-
-
Saving U-Boot in the NOR flash
---------------------------------
-The procedure to save in the NOR flash is quite the same as to write into the NAND.
-
Check the partition for boot in the NOR flash. Setting the mtdparts as reported,
the boot partition should be /dev/mtd0.
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 787c9232d25..7cb6b3086f1 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -32,6 +32,8 @@
#include <i2c.h>
#include <pmic.h>
#include <fsl_pmic.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
#include <mc9sdz60.h>
#include <mc13892.h>
#include <linux/types.h>
@@ -275,3 +277,26 @@ int board_eth_init(bd_t *bis)
return rc;
}
+
+#if defined(CONFIG_FSL_ESDHC)
+
+struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
+
+int board_mmc_init(bd_t *bis)
+{
+ /* configure pins for SDHC1 only */
+ mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
+}
+#endif
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 909ccca11e9..4b4e89b0e22 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -197,18 +197,18 @@ static iomux_v3_cfg_t button_pads[] = {
static void setup_iomux_enet(void)
{
- gpio_direction_output(87, 0); /* GPIO 3-23 */
- gpio_direction_output(190, 1); /* GPIO 6-30 */
- gpio_direction_output(185, 1); /* GPIO 6-25 */
- gpio_direction_output(187, 1); /* GPIO 6-27 */
- gpio_direction_output(188, 1); /* GPIO 6-28*/
- gpio_direction_output(189, 1); /* GPIO 6-29 */
+ gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
+ gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
- gpio_direction_output(184, 1); /* GPIO 6-24 */
+ gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
/* Need delay 10ms according to KSZ9021 spec */
udelay(1000 * 10);
- gpio_set_value(87, 1); /* GPIO 3-23 */
+ gpio_set_value(IMX_GPIO_NR(3, 23), 1);
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
}
@@ -249,11 +249,11 @@ int board_mmc_getcd(struct mmc *mmc)
int ret;
if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
- gpio_direction_input(192); /*GPIO7_0*/
- ret = !gpio_get_value(192);
+ gpio_direction_input(IMX_GPIO_NR(7, 0));
+ ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
} else {
- gpio_direction_input(38); /*GPIO2_6*/
- ret = !gpio_get_value(38);
+ gpio_direction_input(IMX_GPIO_NR(2, 6));
+ ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
}
return ret;
diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile
index bd2174fec32..f95356f16d2 100644
--- a/board/genesi/mx51_efikamx/Makefile
+++ b/board/genesi/mx51_efikamx/Makefile
@@ -27,11 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := efikamx.o
-
-ifdef CONFIG_CMD_USB
-COBJS += efikamx-usb.o
-endif
+COBJS := efikamx.o efikamx-usb.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c
index e9273d027a0..cf020c35cb6 100644
--- a/board/genesi/mx51_efikamx/efikamx-usb.c
+++ b/board/genesi/mx51_efikamx/efikamx-usb.c
@@ -214,3 +214,15 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
if (port)
mdelay(10);
}
+
+/*
+ * Ethernet on the Smarttop is on the USB bus. Rather than give an error about
+ * "CPU Net Initialization Failed", just pass this test since no other settings
+ * are required. Smartbook doesn't have built-in Ethernet but we will let it
+ * pass anyway considering someone may have plugged in a USB stick and all
+ * they need to do is run "usb start".
+ */
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index 6d98c94db91..cfd2e938b94 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -492,9 +492,6 @@ int board_late_init(void)
ARRAY_SIZE(efikamx_pata_pads));
setup_iomux_usb();
- if (machine_is_efikasb())
- setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
-
return 0;
}
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index 9bc3c21c9c6..eaa924f0e6a 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -163,7 +163,7 @@ static int ivm_findinventorystring(int type,
if (addr == INVENTORYDATASIZE) {
xcode = -1;
printf("Error end of string not found\n");
- } else if ((size >= (maxlen - 1)) &&
+ } else if ((size > (maxlen - 1)) &&
(buf[addr] != '\r')) {
xcode = -1;
printf("string too long till next CR\n");
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 930c80e7c2a..be8f51c2fc4 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -331,26 +331,6 @@ void board_spi_release_bus(struct spi_slave *slave)
kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1);
}
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- /* Fix this */
- gd->ram_size = get_ram_size((void *)kw_sdram_bar(0),
- kw_sdram_bs(0));
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- gd->bd->bi_dram[i].start = kw_sdram_bar(i);
- gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
- kw_sdram_bs(i));
- }
-}
-
#if (defined(CONFIG_KM_PIGGY4_88E6061))
#define PHY_LED_SEL_REG 0x18
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 7ab20408e86..afe832a5295 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -45,8 +45,8 @@
DECLARE_GLOBAL_DATA_PTR;
-const struct tegra20_sysinfo sysinfo = {
- CONFIG_TEGRA20_BOARD_STRING
+const struct tegra_sysinfo sysinfo = {
+ CONFIG_TEGRA_BOARD_STRING
};
#ifndef CONFIG_SPL_BUILD
@@ -79,7 +79,7 @@ void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi")));
static void power_det_init(void)
{
#if defined(CONFIG_TEGRA20)
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
/* turn off power detects */
writel(0, &pmc->pmc_pwr_det_latch);
@@ -132,7 +132,7 @@ int board_init(void)
board_usb_init(gd->fdt_blob);
#endif
-#ifdef CONFIG_TEGRA20_LP0
+#ifdef CONFIG_TEGRA_LP0
/* save Sdram params to PMC 2, 4, and 24 for WB0 */
warmboot_save_sdram_params();
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index c3519543011..ca5facb7fe7 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -54,4 +54,14 @@
usb@c5004000 {
status = "disabled";
};
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+ nvidia,width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+ nand@0 {
+ reg = <0>;
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ };
+ };
};
diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts
index 335253953b2..25a63a05d0c 100644
--- a/board/nvidia/dts/tegra20-seaboard.dts
+++ b/board/nvidia/dts/tegra20-seaboard.dts
@@ -153,4 +153,14 @@
0x1f04008a>;
linux,fn-keymap = <0x05040002>;
};
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */
+ nvidia,width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+ nand@0 {
+ reg = <0>;
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ };
+ };
};
diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile
index b6efa1c29a0..88b9dcf0305 100644
--- a/board/nvidia/harmony/Makefile
+++ b/board/nvidia/harmony/Makefile
@@ -24,10 +24,6 @@
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 44977c78d1d..b4a811dc5f9 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -73,11 +73,11 @@ int board_mmc_init(bd_t *bd)
debug("board_mmc_init: init SD slot J26\n");
/* init dev 0, SD slot J26, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
debug("board_mmc_init: init SD slot J5\n");
/* init dev 2, SD slot J5, with 4-bit bus */
- tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
+ tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
return 0;
}
diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile
index b6efa1c29a0..88b9dcf0305 100644
--- a/board/nvidia/seaboard/Makefile
+++ b/board/nvidia/seaboard/Makefile
@@ -24,10 +24,6 @@
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 3298a6b3a88..667f60a9bb9 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -81,11 +81,11 @@ int board_mmc_init(bd_t *bd)
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra20_mmc_init(0, 4, -1, -1);
+ tegra_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 1, SD slot, with 4-bit bus */
- tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
+ tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
return 0;
}
diff --git a/board/nvidia/ventana/Makefile b/board/nvidia/ventana/Makefile
index e3b7435530b..147d0bcf950 100644
--- a/board/nvidia/ventana/Makefile
+++ b/board/nvidia/ventana/Makefile
@@ -24,9 +24,7 @@
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common $(obj)../seaboard)
-endif
+$(shell mkdir -p $(obj)../seaboard)
LIB = $(obj)lib$(BOARD).o
diff --git a/board/nvidia/whistler/Makefile b/board/nvidia/whistler/Makefile
index a910577f21a..913f1cea4a9 100644
--- a/board/nvidia/whistler/Makefile
+++ b/board/nvidia/whistler/Makefile
@@ -24,10 +24,6 @@
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index c0a114d6677..598b2e5ce25 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -81,10 +81,10 @@ int board_mmc_init(bd_t *bd)
pin_mux_mmc();
/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
- tegra20_mmc_init(0, 8, -1, -1);
+ tegra_mmc_init(0, 8, -1, -1);
/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
- tegra20_mmc_init(1, 8, -1, -1);
+ tegra_mmc_init(1, 8, -1, -1);
return 0;
}
diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c
index 5e07bf8d4e2..06df0af06f3 100644
--- a/board/taskit/stamp9g20/stamp9g20.c
+++ b/board/taskit/stamp9g20/stamp9g20.c
@@ -159,15 +159,28 @@ int board_early_init_f(void)
return 0;
}
-int board_init(void)
+int board_postclk_init(void)
{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ /*
+ * Initialize the serial interface here, because be need a running
+ * timer to set PC9 to high and wait for some time to enable the
+ * level converter of the RS232 interface on the PortuxG20 board.
+ */
- /* Enable the serial interface */
+#ifdef CONFIG_PORTUXG20
at91_set_gpio_output(AT91_PIN_PC9, 1);
+ mdelay(1);
+#endif
at91_seriald_hw_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
stamp9G20_nand_hw_init();
#ifdef CONFIG_MACB
stamp9G20_macb_hw_init();
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index c2b10ac1eaa..7429e934fde 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -100,8 +100,18 @@ int board_init(void)
int misc_init_r(void)
{
+ char *eth_addr;
+
dieid_num_r();
+ eth_addr = getenv("ethaddr");
+ if (eth_addr)
+ return 0;
+
+#ifndef CONFIG_SPL_BUILD
+ TAM3517_READ_MAC_FROM_EEPROM;
+#endif
+
return 0;
}
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 9fbaedd7920..b8ad4471f52 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -21,13 +21,17 @@
#include <common.h>
#include <netdev.h>
+#include <malloc.h>
#include <fpga.h>
+#include <video_fb.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
@@ -39,6 +43,9 @@
DECLARE_GLOBAL_DATA_PTR;
+#define BUZZER 140
+#define SPEAKER 141
+
#ifndef CONFIG_FPGA
#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
#endif
@@ -50,6 +57,42 @@ DECLARE_GLOBAL_DATA_PTR;
#define FPGA_INIT 119
#define FPGA_DONE 154
+#define LCD_PWR 138
+#define LCD_PON_PIN 139
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+static struct {
+ u32 xres;
+ u32 yres;
+} panel_resolution[] = {
+ { 480, 272 },
+ { 800, 480 }
+};
+
+static struct panel_config lcd_cfg[] = {
+ {
+ .timing_h = PANEL_TIMING_H(4, 8, 41),
+ .timing_v = PANEL_TIMING_V(2, 4, 10),
+ .pol_freq = 0x00000000, /* Pol Freq */
+ .divisor = 0x0001000d, /* 33Mhz Pixel Clock */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ },
+ {
+ .timing_h = PANEL_TIMING_H(20, 192, 4),
+ .timing_v = PANEL_TIMING_V(2, 20, 10),
+ .pol_freq = 0x00004000, /* Pol Freq */
+ .divisor = 0x0001000E, /* 36Mhz Pixel Clock */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ }
+};
+#endif
+
/* Timing definitions for FPGA */
static const u32 gpmc_fpga[] = {
FPGA_GPMC_CONFIG1,
@@ -193,6 +236,33 @@ int board_init(void)
mt_ventoux_init_fpga();
+ /* GPIO_140: speaker #mute */
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4))
+ /* GPIO_141: Buzz Hi */
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4))
+
+ /* Turning off the buzzer */
+ gpio_request(BUZZER, "BUZZER_MUTE");
+ gpio_request(SPEAKER, "SPEAKER");
+ gpio_direction_output(BUZZER, 0);
+ gpio_direction_output(SPEAKER, 0);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ char *eth_addr;
+
+ dieid_num_r();
+
+ eth_addr = getenv("ethaddr");
+ if (eth_addr)
+ return 0;
+
+#ifndef CONFIG_SPL_BUILD
+ TAM3517_READ_MAC_FROM_EEPROM;
+#endif
return 0;
}
@@ -224,3 +294,46 @@ int board_mmc_init(bd_t *bis)
return omap_mmc_init(0, 0, 0);
}
#endif
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+int board_video_init(void)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ struct panel_config *panel = &lcd_cfg[0];
+ char *s;
+ u32 index = 0;
+
+ void *fb;
+
+ fb = (void *)0x88000000;
+
+ s = getenv("panel");
+ if (s) {
+ index = simple_strtoul(s, NULL, 10);
+ if (index < ARRAY_SIZE(lcd_cfg))
+ panel = &lcd_cfg[index];
+ else
+ return 0;
+ }
+
+ panel->frame_buffer = fb;
+ printf("Panel: %dx%d\n", panel_resolution[index].xres,
+ panel_resolution[index].yres);
+ panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
+ (panel_resolution[index].xres - 1);
+
+ gpio_request(LCD_PWR, "LCD Power");
+ gpio_request(LCD_PON_PIN, "LCD Pon");
+ gpio_direction_output(LCD_PWR, 0);
+ gpio_direction_output(LCD_PON_PIN, 1);
+
+
+ setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+ setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+ omap3_dss_panel_config(panel);
+ omap3_dss_enable();
+
+ return 0;
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
index 9b2e43ec6f0..1cd7ec2ab29 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = {
/*GPIO_62: FPGA_RESET */ \
MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/ \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
+ /* GPIO_64*/ \
MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
/* DSS */\
MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
@@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
/* CAMERA */\
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
@@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = {
/* GPIO_126: CardDetect */\
MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
+ /*GPIO_128 */ \
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
\
MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
@@ -221,7 +203,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \
MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \
/* GPIO_138: LCD_ENVD */\
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \
/* GPIO_139: LCD_PON */\
/* McBSP */\
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
@@ -241,16 +223,12 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \
/* GPIO_119: FPGA_INIT */ \
\
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \
- /* GPIO_140: speaker #mute */\
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \
- /* GPIO_141: Buzz Hi */\
MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \
\
MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) \
/*GPIO_152: Ignition Sense */ \
- MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) \
+ MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M4)) \
/*GPIO_153: Power Button Sense */ \
MUX_VAL(CP(MCBSP4_DX), (IEN | PTU | DIS | M4)) \
/* GPIO_154: FPGA_DONE */ \
@@ -264,10 +242,14 @@ const omap3_sysinfo sysinfo = {
/* GPIO_150: USB status 1 */\
\
MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2)) \
+ /* gpt9_pwm */\
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M2)) \
+ /* gpt10_pwm */\
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M2)) \
+ /* gpt8_pwm */\
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M2)) \
+ /* gpt11_pwm */\
\
MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) \
/*GPIO_163 : TS_PENIRQ*/ \
@@ -299,22 +281,24 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) \
/* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M4)) \
+ /* GPIO94 */\
MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M4)) \
/* GPIO95: #Enable Output */\
- MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M4)) \
/* GPIO 99: #SOM_PWR_OFF */\
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \
MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M4)) \
/* GPIO_100: #power out */\
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M4)) \
+ /* GPIO_102 */\
+ MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M4)) \
/* RMII */\
MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
@@ -363,7 +347,8 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
\
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) \
+ /* gpio_10 */\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
/* JTAG */\
MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
@@ -387,12 +372,15 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \
MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) \
+ /* gpio_24 */\
MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) \
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \
+ /* gpio_26 */\
MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) \
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
+ /* gpio_29 */\
/* Die to Die */\
MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \