Merge branch 'master' of git://www.denx.de/git/u-boot-imx

4 files changed, 51 insertions, 28 deletions

diff --git a/board/freescale/mx7dsabresd/MAINTAINERS b/board/freescale/mx7dsabresd/MAINTAINERS
index 3910ee45248..b96642a568f 100644
--- a/board/freescale/mx7dsabresd/MAINTAINERS
+++ b/board/freescale/mx7dsabresd/MAINTAINERS
@@ -1,5 +1,5 @@
 MX7DSABRESD BOARD
-M:	Adrian Alonso <aalonso@freescale.com>
+M:	Adrian Alonso <adrian.alonso@nxp.com>
 S:	Maintained
 F:	board/freescale/mx7dsabresd
 F:	include/configs/mx7dsabresd.h
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index fee24e2b5f5..4d0b195798b 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -23,6 +23,7 @@
 #include <i2c.h>
 #include <asm/imx-common/mxc_i2c.h>
 #include <asm/arch/crm_regs.h>
+#include <usb.h>
 #include <usb/ehci-fsl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -111,6 +112,14 @@ static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
 	MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
+static iomux_v3_cfg_t const usb_otg1_pads[] = {
+	MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
 #define IOX_SDI IMX_GPIO_NR(1, 9)
 #define IOX_STCP IMX_GPIO_NR(1, 12)
 #define IOX_SHCP IMX_GPIO_NR(1, 13)
@@ -511,6 +520,10 @@ int board_early_init_f(void)
 	setup_iomux_uart();
 
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
+					 ARRAY_SIZE(usb_otg1_pads));
+	imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+					 ARRAY_SIZE(usb_otg2_pads));
 
 	return 0;
 }
@@ -602,29 +615,11 @@ int checkboard(void)
 }
 
 #ifdef CONFIG_USB_EHCI_MX7
-static iomux_v3_cfg_t const usb_otg1_pads[] = {
-	MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
-	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_ehci_hcd_init(int port)
+int board_usb_phy_mode(int port)
 {
-	switch (port) {
-	case 0:
-		imx_iomux_v3_setup_multiple_pads(usb_otg1_pads,
-						 ARRAY_SIZE(usb_otg1_pads));
-		break;
-	case 1:
-		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
-						 ARRAY_SIZE(usb_otg2_pads));
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-	return 0;
+	if (port == 0)
+		return USB_INIT_DEVICE;
+	else
+		return USB_INIT_HOST;
 }
 #endif
diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c
index e7523f168b8..08566fcb8d4 100644
--- a/board/seco/mx6quq7/mx6quq7.c
+++ b/board/seco/mx6quq7/mx6quq7.c
@@ -91,11 +91,30 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 
+#define USDHC4_CD_GPIO		IMX_GPIO_NR(2, 6)
+
 static struct fsl_esdhc_cfg usdhc_cfg[2] = {
-	{USDHC3_BASE_ADDR},
-	{USDHC2_BASE_ADDR},
+	{USDHC3_BASE_ADDR, 0, 4},
+	{USDHC4_BASE_ADDR, 0, 4},
 };
 
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC3_BASE_ADDR:
+		ret = 1; /* Assume eMMC is always present */
+		break;
+	case USDHC4_BASE_ADDR:
+		ret = !gpio_get_value(USDHC4_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
 int board_mmc_init(bd_t *bis)
 {
 	u32 index = 0;
@@ -112,12 +131,10 @@ int board_mmc_init(bd_t *bis)
 		case 0:
 			seco_mx6_setup_usdhc_iomux(3);
 			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-			usdhc_cfg[0].max_bus_width = 4;
 			break;
 		case 1:
 			seco_mx6_setup_usdhc_iomux(4);
 			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-			usdhc_cfg[1].max_bus_width = 4;
 			break;
 
 		default:
diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
index 7707cf5595c..f159af9fbe2 100644
--- a/board/tbs/tbs2910/tbs2910.c
+++ b/board/tbs/tbs2910/tbs2910.c
@@ -257,6 +257,17 @@ int board_mmc_init(bd_t *bis)
 	}
 	return 0;
 }
+
+/* set environment device to boot device when booting from SD */
+int board_mmc_get_env_dev(int devno)
+{
+	return devno - 1;
+}
+
+int board_mmc_get_env_part(int devno)
+{
+	return (devno == 3) ? 1 : 0; /* part 0 for SD2 / SD3, part 1 for eMMC */
+}
 #endif /* CONFIG_FSL_ESDHC */
 
 #ifdef CONFIG_VIDEO_IPUV3