diff options
author | Michal Simek <michal.simek@xilinx.com> | 2013-01-23 14:11:50 +0100 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2013-02-04 12:09:49 +0100 |
commit | 151eeeb2754da4b2d26bb878206d45ce58276fe0 (patch) | |
tree | 96e4bc0b351f7761beaca8b85f49c41395a3293e /board/xilinx/common/xdma_channel.c | |
parent | 74b87c4ceb750547bf019f694b7d7490cc28a94a (diff) |
board: xilinx: Remove common folder
All these files was used for ancient xilinx drivers
which are finally gone.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Rommel Custodio <sessyargc@gmail.com>
Diffstat (limited to 'board/xilinx/common/xdma_channel.c')
-rw-r--r-- | board/xilinx/common/xdma_channel.c | 738 |
1 files changed, 0 insertions, 738 deletions
diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c deleted file mode 100644 index f8161382436..00000000000 --- a/board/xilinx/common/xdma_channel.c +++ /dev/null @@ -1,738 +0,0 @@ -/****************************************************************************** -* -* Author: Xilinx, Inc. -* -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the -* Free Software Foundation; either version 2 of the License, or (at your -* option) any later version. -* -* -* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A -* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS -* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, -* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE -* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING -* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. -* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO -* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY -* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM -* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND -* FITNESS FOR A PARTICULAR PURPOSE. -* -* -* Xilinx hardware products are not intended for use in life support -* appliances, devices, or systems. Use in such applications is -* expressly prohibited. -* -* -* (c) Copyright 2002-2004 Xilinx Inc. -* All rights reserved. -* -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 675 Mass Ave, Cambridge, MA 02139, USA. -* -* FILENAME: -* -* xdma_channel.c -* -* DESCRIPTION: -* -* This file contains the DMA channel component. This component supports -* a distributed DMA design in which each device can have it's own dedicated -* DMA channel, as opposed to a centralized DMA design. This component -* performs processing for DMA on all devices. -* -* See xdma_channel.h for more information about this component. -* -* NOTES: -* -* None. -* -******************************************************************************/ - -/***************************** Include Files *********************************/ - -#include "xdma_channel.h" -#include "xbasic_types.h" -#include "xio.h" - -/************************** Constant Definitions *****************************/ - -/**************************** Type Definitions *******************************/ - -/***************** Macros (Inline Functions) Definitions *********************/ - -/************************** Function Prototypes ******************************/ - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_Initialize -* -* DESCRIPTION: -* -* This function initializes a DMA channel. This function must be called -* prior to using a DMA channel. Initialization of a channel includes setting -* up the registers base address, and resetting the channel such that it's in a -* known state. Interrupts for the channel are disabled when the channel is -* reset. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* BaseAddress contains the base address of the registers for the DMA channel. -* -* RETURN VALUE: -* -* XST_SUCCESS indicating initialization was successful. -* -* NOTES: -* -* None. -* -******************************************************************************/ -XStatus -XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress) -{ - /* assert to verify input arguments, don't assert base address */ - - XASSERT_NONVOID(InstancePtr != NULL); - - /* setup the base address of the registers for the DMA channel such - * that register accesses can be done - */ - InstancePtr->RegBaseAddress = BaseAddress; - - /* initialize the scatter gather list such that it indicates it has not - * been created yet and the DMA channel is ready to use (initialized) - */ - InstancePtr->GetPtr = NULL; - InstancePtr->PutPtr = NULL; - InstancePtr->CommitPtr = NULL; - InstancePtr->LastPtr = NULL; - - InstancePtr->TotalDescriptorCount = 0; - InstancePtr->ActiveDescriptorCount = 0; - InstancePtr->IsReady = XCOMPONENT_IS_READY; - - /* initialize the version of the component - */ - XVersion_FromString(&InstancePtr->Version, (s8 *)"1.00a"); - - /* reset the DMA channel such that it's in a known state and ready - * and indicate the initialization occured with no errors, note that - * the is ready variable must be set before this call or reset will assert - */ - XDmaChannel_Reset(InstancePtr); - - return XST_SUCCESS; -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_IsReady -* -* DESCRIPTION: -* -* This function determines if a DMA channel component has been successfully -* initialized such that it's ready to use. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* TRUE if the DMA channel component is ready, FALSE otherwise. -* -* NOTES: -* -* None. -* -******************************************************************************/ -u32 -XDmaChannel_IsReady(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments used by the base component */ - - XASSERT_NONVOID(InstancePtr != NULL); - - return InstancePtr->IsReady == XCOMPONENT_IS_READY; -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_GetVersion -* -* DESCRIPTION: -* -* This function gets the software version for the specified DMA channel -* component. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* A pointer to the software version of the specified DMA channel. -* -* NOTES: -* -* None. -* -******************************************************************************/ -XVersion * -XDmaChannel_GetVersion(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* return a pointer to the version of the DMA channel */ - - return &InstancePtr->Version; -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_SelfTest -* -* DESCRIPTION: -* -* This function performs a self test on the specified DMA channel. This self -* test is destructive as the DMA channel is reset and a register default is -* verified. -* -* ARGUMENTS: -* -* InstancePtr is a pointer to the DMA channel to be operated on. -* -* RETURN VALUE: -* -* XST_SUCCESS is returned if the self test is successful, or one of the -* following errors. -* -* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value -* after a reset was not correct -* -* NOTES: -* -* This test does not performs a DMA transfer to test the channel because the -* DMA hardware will not currently allow a non-local memory transfer to non-local -* memory (memory copy), but only allows a non-local memory to or from the device -* memory (typically a FIFO). -* -******************************************************************************/ - -#define XDC_CONTROL_REG_RESET_MASK 0x98000000UL /* control reg reset value */ - -XStatus -XDmaChannel_SelfTest(XDmaChannel * InstancePtr) -{ - u32 ControlReg; - - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* reset the DMA channel such that it's in a known state before the test - * it resets to no interrupts enabled, the desired state for the test - */ - XDmaChannel_Reset(InstancePtr); - - /* this should be the first test to help prevent a lock up with the polling - * loop that occurs later in the test, check the reset value of the DMA - * control register to make sure it's correct, return with an error if not - */ - ControlReg = XDmaChannel_GetControl(InstancePtr); - if (ControlReg != XDC_CONTROL_REG_RESET_MASK) { - return XST_DMA_RESET_REGISTER_ERROR; - } - - return XST_SUCCESS; -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_Reset -* -* DESCRIPTION: -* -* This function resets the DMA channel. This is a destructive operation such -* that it should not be done while a channel is being used. If the DMA channel -* is transferring data into other blocks, such as a FIFO, it may be necessary -* to reset other blocks. This function does not modify the contents of a -* scatter gather list for a DMA channel such that the user is responsible for -* getting buffer descriptors from the list if necessary. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* None. -* -* NOTES: -* -* None. -* -******************************************************************************/ -void -XDmaChannel_Reset(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* reset the DMA channel such that it's in a known state, the reset - * register is self clearing such that it only has to be set - */ - XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET, - XDC_RESET_MASK); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_GetControl -* -* DESCRIPTION: -* -* This function gets the control register contents of the DMA channel. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* The control register contents of the DMA channel. One or more of the -* following values may be contained the register. Each of the values are -* unique bit masks. -* -* XDC_DMACR_SOURCE_INCR_MASK Increment the source address -* XDC_DMACR_DEST_INCR_MASK Increment the destination address -* XDC_DMACR_SOURCE_LOCAL_MASK Local source address -* XDC_DMACR_DEST_LOCAL_MASK Local destination address -* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable -* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt -* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet -* -* NOTES: -* -* None. -* -******************************************************************************/ -u32 -XDmaChannel_GetControl(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* return the contents of the DMA control register */ - - return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_SetControl -* -* DESCRIPTION: -* -* This function sets the control register of the specified DMA channel. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* Control contains the value to be written to the control register of the DMA -* channel. One or more of the following values may be contained the register. -* Each of the values are unique bit masks such that they may be ORed together -* to enable multiple bits or inverted and ANDed to disable multiple bits. -* -* XDC_DMACR_SOURCE_INCR_MASK Increment the source address -* XDC_DMACR_DEST_INCR_MASK Increment the destination address -* XDC_DMACR_SOURCE_LOCAL_MASK Local source address -* XDC_DMACR_DEST_LOCAL_MASK Local destination address -* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable -* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt -* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet -* -* RETURN VALUE: -* -* None. -* -* NOTES: -* -* None. -* -******************************************************************************/ -void -XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control) -{ - /* assert to verify input arguments except the control which can't be - * asserted since all values are valid - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* set the DMA control register to the specified value */ - - XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_GetStatus -* -* DESCRIPTION: -* -* This function gets the status register contents of the DMA channel. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* The status register contents of the DMA channel. One or more of the -* following values may be contained the register. Each of the values are -* unique bit masks. -* -* XDC_DMASR_BUSY_MASK The DMA channel is busy -* XDC_DMASR_BUS_ERROR_MASK A bus error occurred -* XDC_DMASR_BUS_TIMEOUT_MASK A bus timeout occurred -* XDC_DMASR_LAST_BD_MASK The last buffer descriptor of a packet -* -* NOTES: -* -* None. -* -******************************************************************************/ -u32 -XDmaChannel_GetStatus(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* return the contents of the DMA status register */ - - return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_SetIntrStatus -* -* DESCRIPTION: -* -* This function sets the interrupt status register of the specified DMA channel. -* Setting any bit of the interrupt status register will clear the bit to -* indicate the interrupt processing has been completed. The definitions of each -* bit in the register match the definition of the bits in the interrupt enable -* register. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* Status contains the value to be written to the status register of the DMA -* channel. One or more of the following values may be contained the register. -* Each of the values are unique bit masks such that they may be ORed together -* to enable multiple bits or inverted and ANDed to disable multiple bits. -* -* XDC_IXR_DMA_DONE_MASK The dma operation is done -* XDC_IXR_DMA_ERROR_MASK The dma operation had an error -* XDC_IXR_PKT_DONE_MASK A packet is complete -* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached -* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached -* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed -* XDC_IXR_BD_MASK A buffer descriptor is done -* -* RETURN VALUE: -* -* None. -* -* NOTES: -* -* None. -* -******************************************************************************/ -void -XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status) -{ - /* assert to verify input arguments except the status which can't be - * asserted since all values are valid - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* set the interrupt status register with the specified value such that - * all bits which are set in the register are cleared effectively clearing - * any active interrupts - */ - XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_GetIntrStatus -* -* DESCRIPTION: -* -* This function gets the interrupt status register of the specified DMA channel. -* The interrupt status register indicates which interrupts are active -* for the DMA channel. If an interrupt is active, the status register must be -* set (written) with the bit set for each interrupt which has been processed -* in order to clear the interrupts. The definitions of each bit in the register -* match the definition of the bits in the interrupt enable register. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* The interrupt status register contents of the specified DMA channel. -* One or more of the following values may be contained the register. -* Each of the values are unique bit masks. -* -* XDC_IXR_DMA_DONE_MASK The dma operation is done -* XDC_IXR_DMA_ERROR_MASK The dma operation had an error -* XDC_IXR_PKT_DONE_MASK A packet is complete -* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached -* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached -* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed -* XDC_IXR_SG_END_MASK Current descriptor was the end of the list -* XDC_IXR_BD_MASK A buffer descriptor is done -* -* NOTES: -* -* None. -* -******************************************************************************/ -u32 -XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* return the contents of the interrupt status register */ - - return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_SetIntrEnable -* -* DESCRIPTION: -* -* This function sets the interrupt enable register of the specified DMA -* channel. The interrupt enable register contains bits which enable -* individual interrupts for the DMA channel. The definitions of each bit -* in the register match the definition of the bits in the interrupt status -* register. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* Enable contains the interrupt enable register contents to be written -* in the DMA channel. One or more of the following values may be contained -* the register. Each of the values are unique bit masks such that they may be -* ORed together to enable multiple bits or inverted and ANDed to disable -* multiple bits. -* -* XDC_IXR_DMA_DONE_MASK The dma operation is done -* XDC_IXR_DMA_ERROR_MASK The dma operation had an error -* XDC_IXR_PKT_DONE_MASK A packet is complete -* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached -* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached -* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed -* XDC_IXR_SG_END_MASK Current descriptor was the end of the list -* XDC_IXR_BD_MASK A buffer descriptor is done -* -* RETURN VALUE: -* -* None. -* -* NOTES: -* -* None. -* -******************************************************************************/ -void -XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable) -{ - /* assert to verify input arguments except the enable which can't be - * asserted since all values are valid - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* set the interrupt enable register to the specified value */ - - XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_GetIntrEnable -* -* DESCRIPTION: -* -* This function gets the interrupt enable of the DMA channel. The -* interrupt enable contains flags which enable individual interrupts for the -* DMA channel. The definitions of each bit in the register match the definition -* of the bits in the interrupt status register. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* RETURN VALUE: -* -* The interrupt enable of the DMA channel. One or more of the following values -* may be contained the register. Each of the values are unique bit masks. -* -* XDC_IXR_DMA_DONE_MASK The dma operation is done -* XDC_IXR_DMA_ERROR_MASK The dma operation had an error -* XDC_IXR_PKT_DONE_MASK A packet is complete -* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached -* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached -* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed -* XDC_IXR_BD_MASK A buffer descriptor is done -* -* NOTES: -* -* None. -* -******************************************************************************/ -u32 -XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr) -{ - /* assert to verify input arguments */ - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* return the contents of the interrupt enable register */ - - return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET); -} - -/****************************************************************************** -* -* FUNCTION: -* -* XDmaChannel_Transfer -* -* DESCRIPTION: -* -* This function starts the DMA channel transferring data from a memory source -* to a memory destination. This function only starts the operation and returns -* before the operation may be complete. If the interrupt is enabled, an -* interrupt will be generated when the operation is complete, otherwise it is -* necessary to poll the channel status to determine when it's complete. It is -* the responsibility of the caller to determine when the operation is complete -* by handling the generated interrupt or polling the status. It is also the -* responsibility of the caller to ensure that the DMA channel is not busy with -* another transfer before calling this function. -* -* ARGUMENTS: -* -* InstancePtr contains a pointer to the DMA channel to operate on. -* -* SourcePtr contains a pointer to the source memory where the data is to -* be tranferred from and must be 32 bit aligned. -* -* DestinationPtr contains a pointer to the destination memory where the data -* is to be transferred and must be 32 bit aligned. -* -* ByteCount contains the number of bytes to transfer during the DMA operation. -* -* RETURN VALUE: -* -* None. -* -* NOTES: -* -* The DMA h/w will not currently allow a non-local memory transfer to non-local -* memory (memory copy), but only allows a non-local memory to or from the device -* memory (typically a FIFO). -* -* It is the responsibility of the caller to ensure that the cache is -* flushed and invalidated both before and after the DMA operation completes -* if the memory pointed to is cached. The caller must also ensure that the -* pointers contain a physical address rather than a virtual address -* if address translation is being used. -* -******************************************************************************/ -void -XDmaChannel_Transfer(XDmaChannel * InstancePtr, - u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount) -{ - /* assert to verify input arguments and the alignment of any arguments - * which have expected alignments - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(SourcePtr != NULL); - XASSERT_VOID(((u32) SourcePtr & 3) == 0); - XASSERT_VOID(DestinationPtr != NULL); - XASSERT_VOID(((u32) DestinationPtr & 3) == 0); - XASSERT_VOID(ByteCount != 0); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* setup the source and destination address registers for the transfer */ - - XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET, - (u32) SourcePtr); - - XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET, - (u32) DestinationPtr); - - /* start the DMA transfer to copy from the source buffer to the - * destination buffer by writing the length to the length register - */ - XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount); -} |