board: toradex: add aquila am69 support

This adds initial support for the Toradex Aquila AM69 module.

Upstream-Status: Pending

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

1 files changed, 99 insertions, 0 deletions

diff --git a/board/toradex/aquila-am69/aquila-am69.c b/board/toradex/aquila-am69/aquila-am69.c
new file mode 100644
index 0000000000..ac74bffe69
--- /dev/null
+++ b/board/toradex/aquila-am69/aquila-am69.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Board specific initialization for Aquila AM69 SoM
+ *
+ * Copyright 2024 Toradex - https://www.toradex.com/
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <env.h>
+#include <spl.h>
+
+#include "../../../arch/arm/mach-k3/common_fdt.h"
+#include "../common/tdx-common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	s32 ret;
+
+	ret = fdtdec_setup_mem_size_base_lowest();
+	if (ret)
+		printf("Error setting up mem size and base. %d\n", ret);
+
+	return ret;
+}
+
+int dram_init_banksize(void)
+{
+	s32 ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		printf("Error setting up memory banksize. %d\n", ret);
+
+	return ret;
+}
+
+phys_size_t board_get_usable_ram_top(phys_size_t total_size)
+{
+#ifdef CONFIG_PHYS_64BIT
+	/* Limit RAM used by U-Boot to the DDR low region */
+	if (gd->ram_top > 0x100000000)
+		return 0x100000000;
+#endif
+
+	return gd->ram_top;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	int ret;
+
+	ret = fdt_fixup_msmc_ram_k3(blob);
+	if (ret)
+		return ret;
+
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
+void spl_board_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (IS_ENABLED(CONFIG_ESM_K3)) {
+		ret = uclass_get_device_by_name(UCLASS_MISC, "esm@700000",
+						&dev);
+		if (ret)
+			printf("MISC init for esm@700000 failed: %d\n", ret);
+
+		ret = uclass_get_device_by_name(UCLASS_MISC, "esm@40800000",
+						&dev);
+		if (ret)
+			printf("MISC init for esm@40800000 failed: %d\n", ret);
+
+		ret = uclass_get_device_by_name(UCLASS_MISC, "esm@42080000",
+						&dev);
+		if (ret)
+			printf("MISC init for esm@42080000 failed: %d\n", ret);
+	}
+
+	if (IS_ENABLED(CONFIG_ESM_PMIC)) {
+		ret = uclass_get_device_by_driver(UCLASS_MISC,
+						  DM_DRIVER_GET(pmic_esm),
+						  &dev);
+		if (ret)
+			printf("ESM PMIC init failed: %d\n", ret);
+	}
+}