diff options
author | Tom Rini <trini@konsulko.com> | 2020-06-30 15:02:27 -0400 |
---|---|---|
committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-07-13 20:58:34 +0530 |
commit | 58ad372c4995398fd1c0c4c848d8e300648da1ca (patch) | |
tree | 5aba4bf799e284968ab92e53be8a399d7ba850b1 /board/ti | |
parent | 7bb33e4684aaee9e4e36dc673d32f4539f96d91a (diff) |
omap3_beagle: Finish current outstanding DM migrations
At this point in time we can now remove our legacy code and switch to
enabling DM for USB and Ethernet.
Cc: Derald D. Woods <woods.technical@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
Diffstat (limited to 'board/ti')
-rw-r--r-- | board/ti/beagle/beagle.c | 70 |
1 files changed, 0 insertions, 70 deletions
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 9139ad87d40..9ccd566da37 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -40,11 +40,6 @@ #include "beagle.h" #include <command.h> -#ifdef CONFIG_USB_EHCI_HCD -#include <usb.h> -#include <asm/ehci-omap.h> -#endif - #define TWL4030_I2C_BUS 0 #define EXPANSION_EEPROM_I2C_BUS 1 #define EXPANSION_EEPROM_I2C_ADDRESS 0x50 @@ -297,33 +292,6 @@ static void beagle_dvi_pup(void) } #endif -#ifdef CONFIG_USB_MUSB_OMAP2PLUS -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 16, - .ram_bits = 12, -}; - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, -}; - -static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_HOST) - .mode = MUSB_HOST, -#elif defined(CONFIG_USB_MUSB_GADGET) - .mode = MUSB_PERIPHERAL, -#else -#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET" -#endif - .config = &musb_config, - .power = 100, - .platform_ops = &omap2430_ops, - .board_data = &musb_board_data, -}; -#endif - /* * Routine: misc_init_r * Description: Configure board specific parts @@ -506,10 +474,6 @@ int misc_init_r(void) omap3_dss_enable(); #endif -#ifdef CONFIG_USB_MUSB_OMAP2PLUS - musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE); -#endif - if (generate_fake_mac) omap_die_id_usbethaddr(); @@ -548,37 +512,3 @@ void board_mmc_power_init(void) twl4030_power_mmc_init(0); } #endif - -#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD) -/* Call usb_stop() before starting the kernel */ -void show_boot_progress(int val) -{ - if (val == BOOTSTAGE_ID_RUN_OS) - usb_stop(); -} - -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); -} - -int ehci_hcd_stop(int index) -{ - return omap_ehci_hcd_stop(); -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) -int board_eth_init(bd_t *bis) -{ - return usb_eth_initialize(bis); -} -#endif |