board: ti: j721s2: Add board support for J721S2

Add board support for J721S2 SoC.

Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

1 files changed, 180 insertions, 0 deletions

diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
new file mode 100644
index 0000000000..3c75ecfc0f
--- /dev/null
+++ b/board/ti/j721s2/evm.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Board specific initialization for J721S2 EVM
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ *	David Huang <d-huang@ti.com>
+ *
+ */
+
+#include <common.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <generic-phy.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <net.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <spl.h>
+#include <asm/arch/sys_proto.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+
+#include "../common/board_detect.h"
+
+#define board_is_j721s2_som()	board_ti_k3_is("J721S2X-PM1-SOM")
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+#ifdef CONFIG_PHYS_64BIT
+	gd->ram_size = 0x100000000;
+#else
+	gd->ram_size = 0x80000000;
+#endif
+
+	return 0;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_PHYS_64BIT
+	/* Limit RAM used by U-Boot to the DDR low region */
+	if (gd->ram_top > 0x100000000)
+		return 0x100000000;
+#endif
+
+	return gd->ram_top;
+}
+
+int dram_init_banksize(void)
+{
+	/* Bank 0 declares the memory available in the DDR low region */
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = 0x7fffffff;
+	gd->ram_size = 0x80000000;
+
+#ifdef CONFIG_PHYS_64BIT
+	/* Bank 1 declares the memory available in the DDR high region */
+	gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1;
+	gd->bd->bi_dram[1].size = 0x37fffffff;
+	gd->ram_size = 0x400000000;
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (!strcmp(name, "k3-j721s2-common-proc-board"))
+		return 0;
+
+	return -1;
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	int ret;
+
+	ret = fdt_fixup_msmc_ram(blob, "/bus@100000", "sram@70000000");
+	if (ret < 0)
+		ret = fdt_fixup_msmc_ram(blob, "/interconnect@100000",
+					 "sram@70000000");
+	if (ret)
+		printf("%s: fixing up msmc ram failed %d\n", __func__, ret);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+int do_board_detect(void)
+{
+	int ret;
+
+	ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
+					 CONFIG_EEPROM_CHIP_ADDRESS);
+	if (ret)
+		pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
+		       CONFIG_EEPROM_CHIP_ADDRESS, ret);
+
+	return ret;
+}
+
+int checkboard(void)
+{
+	struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+
+	if (do_board_detect())
+		/* EEPROM not populated */
+		printf("Board: %s rev %s\n", "J721S2X-PM1-SOM", "E1");
+	else
+		printf("Board: %s rev %s\n", ep->name, ep->version);
+
+	return 0;
+}
+
+static void setup_board_eeprom_env(void)
+{
+	char *name = "j721s2";
+
+	if (do_board_detect())
+		goto invalid_eeprom;
+
+	if (board_is_j721s2_som())
+		name = "j721s2";
+	else
+		printf("Unidentified board claims %s in eeprom header\n",
+		       board_ti_get_name());
+
+invalid_eeprom:
+	set_board_info_env_am6(name);
+}
+
+static void setup_serial(void)
+{
+	struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+	unsigned long board_serial;
+	char *endp;
+	char serial_string[17] = { 0 };
+
+	if (env_get("serial#"))
+		return;
+
+	board_serial = simple_strtoul(ep->serial, &endp, 16);
+	if (*endp != '\0') {
+		pr_err("Error: Can't set serial# to %s\n", ep->serial);
+		return;
+	}
+
+	snprintf(serial_string, sizeof(serial_string), "%016lx", board_serial);
+	env_set("serial#", serial_string);
+}
+#endif
+
+int board_late_init(void)
+{
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) {
+		setup_board_eeprom_env();
+		setup_serial();
+	}
+
+	return 0;
+}
+
+void spl_board_init(void)
+{
+}