summaryrefslogtreecommitdiff
path: root/board/theobroma-systems
diff options
context:
space:
mode:
authorQuentin Schulz <quentin.schulz@theobroma-systems.com>2022-09-15 11:14:27 +0200
committerKever Yang <kever.yang@rock-chips.com>2022-10-19 19:30:49 +0800
commitb1f1b4a5a528eeefea283ccca2ee9777cb10c840 (patch)
treeb7d4655c0111e0d4873815a22b4738e04ab73370 /board/theobroma-systems
parentac471587f28f9539ab1da27c9fa491f69eb106a9 (diff)
rockchip: puma-rk3399: load environment from same medium as one used to load U-Boot proper
Chances are when one boots U-Boot proper from a given storage medium, they want the same medium to be used to load and store the environment. This basically allows to have completely separate U-Boot (TPL/SPL/U-Boot proper/environment) per storage medium which is convenient when working with recovery from SD-Card as one would just need to insert a properly configured SD-Card into the device to have access to their whole debug setup. No fallback mechanism is provided as to not dirty other storage medium environment by mistake. However, since arch_env_get_location() is called by env_init() which is part of the pre-relocation process, a valid, non-ENVL_UNKNOWN, value shall be returned otherwise the relocation fails with the following message: initcall sequence 00000000002866c0 failed at call 0000000000256b34 (err=-19) This valid, non-ENVL_UNKNOWN, value is ENVL_NOWHERE which requires to always select CONFIG_ENV_IS_NOWHERE otherwise this work-around does not work. Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'board/theobroma-systems')
-rw-r--r--board/theobroma-systems/puma_rk3399/puma-rk3399.c37
1 files changed, 37 insertions, 0 deletions
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index f41293080c..97f398bd75 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <dm.h>
#include <env.h>
+#include <env_internal.h>
#include <init.h>
#include <log.h>
#include <misc.h>
@@ -135,6 +136,42 @@ int mmc_get_env_dev(void)
return CONFIG_SYS_MMC_ENV_DEV;
}
+#if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE)
+#error Please enable CONFIG_ENV_IS_NOWHERE
+#endif
+
+enum env_location arch_env_get_location(enum env_operation op, int prio)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+
+ if (prio > 0)
+ return ENVL_UNKNOWN;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return ENVL_NOWHERE;
+ }
+
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
+ !strcmp(boot_device, "/spi@ff1d0000/flash@0"))
+ return ENVL_SPI_FLASH;
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
+ (!strcmp(boot_device, "/mmc@fe320000") ||
+ !strcmp(boot_device, "/mmc@fe330000")))
+ return ENVL_MMC;
+
+ printf("%s: No environment available: booted from %s but U-Boot "
+ "config does not allow loading environment from it.",
+ __func__, boot_device);
+
+ return ENVL_NOWHERE;
+}
+
int misc_init_r(void)
{
const u32 cpuid_offset = 0x7;