diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2015-01-13 13:21:46 +0100 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2015-01-22 12:34:55 +0100 |
| commit | 6515032e3b88f0774f93fb05deaf20e48a515fe4 (patch) | |
| tree | 7f4d251b1b4b07d64e5bff19d2e44c975498ef88 /board/sunxi | |
| parent | b56f6e2b4e0291efbe1b50f082dec73272ad7ab3 (diff) | |
sunxi: display: Make lcd display clk phase configurable
While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module
I noticed that the screen flickered. This is caused by the lcd display clk
phase reg value being set to 0, where it should be 1 in this setup.
This commit adds a Kconfig option for the lcd display clk phase, so that we
can set it per board. This defaults to 1, because looking at all the fex
files in sunxi-boards, that is by far the most used value.
This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the
default of 1 with 0, as that is the correct value for those tablets, this
keeps the register settings the same as before this commit.
The Olinuxino-A13 defconfigs are not updated, changing the register setting
for these boards from 0 to 1, this is intentional.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'board/sunxi')
| -rw-r--r-- | board/sunxi/Kconfig | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 6a4d764b7c..d4d1fa24e7 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -338,6 +338,13 @@ config VIDEO_LCD_MODE This is in drivers/video/videomodes.c: video_get_params() format, e.g. x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0 +config VIDEO_LCD_DCLK_PHASE + int "LCD panel display clock phase" + depends on VIDEO + default 1 + ---help--- + Select LCD panel display clock phase shift, range 0-3. + config VIDEO_LCD_POWER string "LCD panel power enable pin" depends on VIDEO |