summaryrefslogtreecommitdiff
path: root/board/stxgp3
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2008-01-16 10:04:42 -0600
committerKumar Gala <galak@kernel.crashing.org>2008-01-16 23:21:56 -0600
commitc8c41d4a80b1a8ad5984a287d81ea780496259f8 (patch)
treed16801f7e70a98bc8f7f636bc458ccbc087bbe0c /board/stxgp3
parent54a5070115eff38e9b324b78abdfa0b4520580b9 (diff)
85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE. While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only be used for configuring the PCI ATMU. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'board/stxgp3')
-rw-r--r--board/stxgp3/init.S8
-rw-r--r--board/stxgp3/law.c2
2 files changed, 5 insertions, 5 deletions
diff --git a/board/stxgp3/init.S b/board/stxgp3/init.S
index 9bc8dd6931d..8e1f16e5ac3 100644
--- a/board/stxgp3/init.S
+++ b/board/stxgp3/init.S
@@ -137,8 +137,8 @@ tlb1_entry:
*/
.long FSL_BOOKE_MAS0(1, 1, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
@@ -146,8 +146,8 @@ tlb1_entry:
*/
.long FSL_BOOKE_MAS0(1, 2, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
- .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
diff --git a/board/stxgp3/law.c b/board/stxgp3/law.c
index 6f215e15e46..312b3c55717 100644
--- a/board/stxgp3/law.c
+++ b/board/stxgp3/law.c
@@ -48,7 +48,7 @@ struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
- SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
/* This is not so much the SDRAM map as it is the whole localbus map. */
SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),