ARM: Add X600 board support (SPEAr600 based)

This patch adds support for the X600 SPEAr600 based board. Its also
the first SPEAr600 board that uses the newly introduced SPEAr600
SPL support. Xloader is not necessary any more. By using the new
"u-boot.spr" make target, one image will generated containing both,
U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and
the main U-Boot with mkimage header.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>

4 files changed, 474 insertions, 0 deletions

diff --git a/board/spear/x600/Makefile b/board/spear/x600/Makefile
new file mode 100644
index 00000000000..8c4e7e2987c
--- /dev/null
+++ b/board/spear/x600/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+ifndef CONFIG_SPL_BUILD
+COBJS	:= fpga.o $(BOARD).o
+endif
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/x600/fpga.c b/board/spear/x600/fpga.c
new file mode 100644
index 00000000000..85eb31be7bc
--- /dev/null
+++ b/board/spear/x600/fpga.c
@@ -0,0 +1,280 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spartan3.h>
+#include <command.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_ssp.h>
+
+/*
+ * FPGA program pin configuration on X600:
+ *
+ * Only PROG and DONE are connected to GPIOs. INIT is not connected to the
+ * SoC at all. And CLOCK and DATA are connected to the SSP2 port. We use
+ * 16bit serial writes via this SSP port to write the data bits into the
+ * FPGA.
+ */
+#define CONFIG_SYS_FPGA_PROG		2
+#define CONFIG_SYS_FPGA_DONE		3
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+static void fpga_reset(int assert)
+{
+	/*
+	 * On x600 we have no means to toggle the FPGA reset signal
+	 */
+	debug("%s:%d: RESET (%d)\n", __func__, __LINE__, assert);
+}
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+static int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	debug("%s:%d: FPGA PROG (%d)\n", __func__, __LINE__, assert);
+
+	gpio_set_value(CONFIG_SYS_FPGA_PROG, assert);
+
+	return assert;
+}
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+static int fpga_init_fn(int cookie)
+{
+	static int state;
+
+	debug("%s:%d: init (state=%d)\n", __func__, __LINE__, state);
+
+	/*
+	 * On x600, the FPGA INIT signal is not connected to the SoC.
+	 * We can't read the INIT status. Let's return the "correct"
+	 * INIT signal state generated via a local state-machine.
+	 */
+	if (++state == 1) {
+		return 1;
+	} else {
+		state = 0;
+		return 0;
+	}
+}
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+static int fpga_done_fn(int cookie)
+{
+	struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+
+	/*
+	 * Wait for Tx-FIFO to become empty before looking for DONE
+	 */
+	while (!(readl(&ssp->sspsr) & SSPSR_TFE))
+		;
+
+	if (gpio_get_value(CONFIG_SYS_FPGA_DONE))
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * FPGA pre-configuration function. Just make sure that
+ * FPGA reset is asserted to keep the FPGA from starting up after
+ * configuration.
+ */
+static int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+	fpga_reset(TRUE);
+
+	return 0;
+}
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+static int fpga_post_config_fn(int cookie)
+{
+	int rc = 0;
+
+	debug("%s:%d: FPGA post configuration\n", __func__, __LINE__);
+
+	fpga_reset(TRUE);
+	udelay(100);
+	fpga_reset(FALSE);
+	udelay(100);
+
+	return rc;
+}
+
+static int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	/*
+	 * No dedicated clock signal on x600 (data & clock generated)
+	 * in SSP interface. So we don't have to do anything here.
+	 */
+	return assert_clk;
+}
+
+static int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+	static int count;
+	static u16 data;
+
+	/*
+	 * First collect 16 bits of data
+	 */
+	data = data << 1;
+	if (assert_write)
+		data |= 1;
+
+	/*
+	 * If 16 bits are not available, return for more bits
+	 */
+	count++;
+	if (count != 16)
+		return assert_write;
+
+	count = 0;
+
+	/*
+	 * Wait for Tx-FIFO to become ready
+	 */
+	while (!(readl(&ssp->sspsr) & SSPSR_TNF))
+		;
+
+	/* Send 16 bits to FPGA via SSP bus */
+	writel(data, &ssp->sspdr);
+
+	return assert_write;
+}
+
+static Xilinx_Spartan3_Slave_Serial_fns x600_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+
+static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+	XILINX_XC3S1200E_DESC(slave_serial, &x600_fpga_fns, 0)
+};
+
+/*
+ * Initialize the SelectMap interface.  We assume that the mode and the
+ * initial state of all of the port pins have already been set!
+ */
+static void fpga_serialslave_init(void)
+{
+	debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__);
+	fpga_pgm_fn(FALSE, FALSE, 0);	/* make sure program pin is inactive */
+}
+
+static int expi_setup(int freq)
+{
+	struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	int pll2_m, pll2_n, pll2_p, expi_x, expi_y;
+
+	pll2_m = (freq * 2) / 1000;
+	pll2_n = 15;
+	pll2_p = 1;
+	expi_x = 1;
+	expi_y = 2;
+
+	/*
+	 * Disable reset, Low compression, Disable retiming, Enable Expi,
+	 * Enable soft reset, DMA, PLL2, Internal
+	 */
+	writel(EXPI_CLK_CFG_LOW_COMPR | EXPI_CLK_CFG_CLK_EN | EXPI_CLK_CFG_RST |
+	       EXPI_CLK_SYNT_EN | EXPI_CLK_CFG_SEL_PLL2 |
+	       EXPI_CLK_CFG_INT_CLK_EN | (expi_y << 16) | (expi_x << 24),
+	       &misc->expi_clk_cfg);
+
+	/*
+	 * 6 uA, Internal feedback, 1st order, Non-dithered, Sample Parameters,
+	 * Enable PLL2, Disable reset
+	 */
+	writel((pll2_m << 24) | (pll2_p << 8) | (pll2_n), &misc->pll2_frq);
+	writel(PLL2_CNTL_6UA | PLL2_CNTL_SAMPLE | PLL2_CNTL_ENABLE |
+	       PLL2_CNTL_RESETN | PLL2_CNTL_LOCK, &misc->pll2_cntl);
+
+	/*
+	 * Disable soft reset
+	 */
+	clrbits_le32(&misc->expi_clk_cfg, EXPI_CLK_CFG_RST);
+
+	return 0;
+}
+
+/*
+ * Initialize the fpga
+ */
+int x600_init_fpga(void)
+{
+	struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+	struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	/* Enable SSP2 clock */
+	writel(readl(&misc->periph1_clken) | MISC_SSP2ENB | MISC_GPIO4ENB,
+	       &misc->periph1_clken);
+
+	/* Set EXPI clock to 45 MHz */
+	expi_setup(45000);
+
+	/* Configure GPIO directions */
+	gpio_direction_output(CONFIG_SYS_FPGA_PROG, 0);
+	gpio_direction_input(CONFIG_SYS_FPGA_DONE);
+
+	writel(SSPCR0_DSS_16BITS, &ssp->sspcr0);
+	writel(SSPCR1_SSE, &ssp->sspcr1);
+
+	/*
+	 * Set lowest prescale divisor value (CPSDVSR) of 2 for max download
+	 * speed.
+	 *
+	 * Actual data clock rate is: 80MHz / (CPSDVSR * (SCR + 1))
+	 * With CPSDVSR at 2 and SCR at 0, the maximume clock rate is 40MHz.
+	 */
+	writel(2, &ssp->sspcpsr);
+
+	fpga_init();
+	fpga_serialslave_init();
+
+	debug("%s:%d: Adding fpga 0\n", __func__, __LINE__);
+	fpga_add(fpga_xilinx, &fpga[0]);
+
+	return 0;
+}
diff --git a/board/spear/x600/fpga.h b/board/spear/x600/fpga.h
new file mode 100644
index 00000000000..2b1855716bd
--- /dev/null
+++ b/board/spear/x600/fpga.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+int x600_init_fpga(void);
diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c
new file mode 100644
index 00000000000..96ec0ad8a5d
--- /dev/null
+++ b/board/spear/x600/x600.c
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <netdev.h>
+#include <phy.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <linux/mtd/fsmc_nand.h>
+#include "fpga.h"
+
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+
+int board_init(void)
+{
+	/*
+	 * X600 is equipped with an M41T82 RTC. This RTC has the
+	 * HT bit (Halt Update), which needs to be cleared upon
+	 * power-up. Otherwise the RTC is halted.
+	 */
+	rtc_reset();
+
+	return spear_board_init(MACH_TYPE_SPEAR600);
+}
+
+int board_late_init(void)
+{
+	/*
+	 * Monitor and env protection on by default
+	 */
+	flash_protect(FLAG_PROTECT_SET,
+		      CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE +
+		      CONFIG_SYS_SPL_LEN + CONFIG_SYS_MONITOR_LEN +
+		      2 * CONFIG_ENV_SECT_SIZE - 1,
+		      &flash_info[0]);
+
+	/* Init FPGA subsystem */
+	x600_init_fpga();
+
+	return 0;
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand:	mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+void board_nand_init(void)
+{
+	struct misc_regs *const misc_regs_p =
+		(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+	struct nand_chip *nand = &nand_chip[0];
+
+	if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
+		fsmc_nand_init(nand);
+}
+
+int designware_board_phy_init(struct eth_device *dev, int phy_addr,
+	int (*mii_write)(struct eth_device *, u8, u8, u16),
+	int dw_reset_phy(struct eth_device *))
+{
+	/* Extended PHY control 1, select GMII */
+	mii_write(dev, phy_addr, 23, 0x0020);
+
+	/* Software reset necessary after GMII mode selction */
+	dw_reset_phy(dev);
+
+	/* Enable extended page register access */
+	mii_write(dev, phy_addr, 31, 0x0001);
+
+	/* 17e: Enhanced LED behavior, needs to be written twice */
+	mii_write(dev, phy_addr, 17, 0x09ff);
+	mii_write(dev, phy_addr, 17, 0x09ff);
+
+	/* 16e: Enhanced LED method select */
+	mii_write(dev, phy_addr, 16, 0xe0ea);
+
+	/* Disable extended page register access */
+	mii_write(dev, phy_addr, 31, 0x0000);
+
+	/* Enable clock output pin */
+	mii_write(dev, phy_addr, 18, 0x0049);
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+
+	if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR,
+				  PHY_INTERFACE_MODE_GMII) >= 0)
+		ret++;
+
+	return ret;
+}