summaryrefslogtreecommitdiff
path: root/board/smdk2400
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-06-19 23:01:32 +0000
committerwdenk <wdenk>2003-06-19 23:01:32 +0000
commit48b42616e928ce6eacfe20276a1614e2b27ac4b5 (patch)
tree0c194fbd1059185f158c0b37dc3c846b50c2ee2f /board/smdk2400
parent15ef8a5d17181ea376fac94579dce0af1cfcdeb7 (diff)
* Patches by David Müller, 12 Jun 2003:
- rewrite of the S3C24X0 register definitions stuff - "driver" for the built-in S3C24X0 RTC * Patches by Yuli Barcohen, 12 Jun 2003: - Add MII support and Ethernet PHY initialization for MPC8260ADS board - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset configuration word supplied by FPGA on some MPC8260ADS boards * Patch by Pantelis Antoniou, 10 Jun 2003: Unify status LED interface
Diffstat (limited to 'board/smdk2400')
-rw-r--r--board/smdk2400/smdk2400.c30
1 files changed, 16 insertions, 14 deletions
diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c
index 2b61b2d8e59..2d6be31befb 100644
--- a/board/smdk2400/smdk2400.c
+++ b/board/smdk2400/smdk2400.c
@@ -46,33 +46,35 @@ extern int do_mdm_init; /* defined in common/main.c */
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
/* memory and cpu-speed are setup before relocation */
/* change the clock to be 50 MHz 1:1:1 */
- rMPLLCON = 0x5c042;
- rCLKDIVN = 0;
+ clk_power->MPLLCON = 0x5c042;
+ clk_power->CLKDIVN = 0;
/* set up the I/O ports */
- rPACON = 0x3ffff;
- rPBCON = 0xaaaaaaaa;
- rPBUP = 0xffff;
- rPECON = 0x0;
- rPEUP = 0x0;
+ gpio->PACON = 0x3ffff;
+ gpio->PBCON = 0xaaaaaaaa;
+ gpio->PBUP = 0xffff;
+ gpio->PECON = 0x0;
+ gpio->PEUP = 0x0;
#ifdef CONFIG_HWFLOW
/*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
/* 10, 10, 00, 00, 10, 00, 10 */
- rPFCON=0xa22;
+ gpio->PFCON=0xa22;
/* Disable pull-up on Rx, Tx, CTS and RTS pins */
- rPFUP=0x35;
+ gpio->PFUP=0x35;
#else
/*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
/* 00, 00, 00, 00, 10, 00, 10 */
- rPFCON = 0x22;
+ gpio->PFCON = 0x22;
/* Disable pull-up on Rx and Tx pins */
- rPFUP = 0x5;
+ gpio->PFUP = 0x5;
#endif /* CONFIG_HWFLOW */
- rPGCON = 0x0;
- rPGUP = 0x0;
- rOPENCR = 0x0;
+ gpio->PGCON = 0x0;
+ gpio->PGUP = 0x0;
+ gpio->OPENCR = 0x0;
/* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
gd->bd->bi_arch_number = 145;