summaryrefslogtreecommitdiff
path: root/board/sixnet
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:07:02 +0000
committerwdenk <wdenk>2002-11-03 00:07:02 +0000
commit5b1d713721c3ea02549940133f09236783dda1f9 (patch)
tree78c0a58b5cc48142617190669a7598e0ca3307dc /board/sixnet
parent47d1a6e1ed87fe1fb3d737acdb85f69bc3259522 (diff)
Initial revision
Diffstat (limited to 'board/sixnet')
-rw-r--r--board/sixnet/sixnet.c563
1 files changed, 563 insertions, 0 deletions
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
new file mode 100644
index 00000000000..c65e8097bbc
--- /dev/null
+++ b/board/sixnet/sixnet.c
@@ -0,0 +1,563 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Dave Ellis, SIXNET, dge@sixnetio.com.
+ * Based on code by:
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * and other contributors to U-Boot. See file CREDITS for list
+ * of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+#include <net.h> /* for eth_init() */
+#include <rtc.h>
+#include "sixnet.h"
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+static long ram_size(ulong *, long);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ * returns 0 if recognized, -1 if unknown
+ */
+
+int checkboard (void)
+{
+ puts ("Board: SIXNET SXNI855T\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#error "SXNI855T has no PCMCIA port"
+#endif /* CFG_CMD_PCMCIA */
+
+/* ------------------------------------------------------------------------- */
+
+#define _not_used_ 0xffffffff
+
+/* UPMB table for dual UART. */
+
+/* this table is for 50MHz operation, it should work at all lower speeds */
+const uint duart_table[] =
+{
+ /* single read. (offset 0 in upm RAM) */
+ 0xfffffc04, 0x0ffffc04, 0x0ff3fc04, 0x0ff3fc04,
+ 0x0ff3fc00, 0x0ff3fc04, 0xfffffc04, 0xfffffc05,
+
+ /* burst read. (offset 8 in upm RAM) */
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* single write. (offset 18 in upm RAM) */
+ 0xfffffc04, 0x0ffffc04, 0x00fffc04, 0x00fffc04,
+ 0x00fffc04, 0x00fffc00, 0xfffffc04, 0xfffffc05,
+
+ /* burst write. (offset 20 in upm RAM) */
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* refresh. (offset 30 in upm RAM) */
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* exception. (offset 3c in upm RAM) */
+ _not_used_, _not_used_, _not_used_, _not_used_,
+};
+
+/* Load FPGA very early in boot sequence, since it must be
+ * loaded before the 16C2550 serial channels can be used as
+ * console channels.
+ *
+ * Note: Much of the configuration is not complete. The
+ * stack is in DPRAM since SDRAM has not been initialized,
+ * so the stack must be kept small. Global variables
+ * are still in FLASH, so they cannot be written.
+ * Only the FLASH, DPRAM, immap and FPGA can be addressed,
+ * the other chip selects may not have been initialized.
+ * The clocks have been initialized, so udelay() can be
+ * used.
+ */
+#define FPGA_DONE 0x0080 /* PA8, input, high when FPGA load complete */
+#define FPGA_PROGRAM_L 0x0040 /* PA9, output, low to reset, high to start */
+#define FPGA_INIT_L 0x0020 /* PA10, input, low indicates not ready */
+#define fpga (*(volatile unsigned char *)(CFG_FPGA_PROG)) /* FPGA port */
+
+int board_postclk_init (void)
+{
+
+ /* the data to load to the XCSxxXL FPGA */
+ static const unsigned char fpgadata[] = {
+# include "fpgadata.c"
+ };
+
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+#define porta (immap->im_ioport.iop_padat)
+ const unsigned char* pdata;
+
+ /* /INITFPGA and DONEFPGA signals are inputs */
+ immap->im_ioport.iop_padir &= ~(FPGA_INIT_L | FPGA_DONE);
+
+ /* Force output pin to begin at 0, /PROGRAM asserted (0) resets FPGA */
+ porta &= ~FPGA_PROGRAM_L;
+
+ /* Set FPGA as an output */
+ immap->im_ioport.iop_padir |= FPGA_PROGRAM_L;
+
+ /* delay a little to make sure FPGA sees it, really
+ * only need less than a microsecond.
+ */
+ udelay(10);
+
+ /* unassert /PROGRAM */
+ porta |= FPGA_PROGRAM_L;
+
+ /* delay while FPGA does last erase, indicated by
+ * /INITFPGA going high. This should happen within a
+ * few milliseconds.
+ */
+ /* ### FIXME - a timeout check would be good, maybe flash
+ * the status LED to indicate the error?
+ */
+ while ((porta & FPGA_INIT_L) == 0)
+ ; /* waiting */
+
+ /* write program data to FPGA at the programming address
+ * so extra /CS1 strobes at end of configuration don't actually
+ * write to any registers.
+ */
+ fpga = 0xff; /* first write is ignored */
+ fpga = 0xff; /* fill byte */
+ fpga = 0xff; /* fill byte */
+ fpga = 0x4f; /* preamble code */
+ fpga = 0x80; fpga = 0xaf; fpga = 0x9b; /* length (ignored) */
+ fpga = 0x4b; /* field check code */
+
+ pdata = fpgadata;
+ /* while no error write out each of the 28 byte frames */
+ while ((porta & (FPGA_INIT_L | FPGA_DONE)) == FPGA_INIT_L
+ && pdata < fpgadata + sizeof(fpgadata)) {
+
+ fpga = 0x4f; /* preamble code */
+
+ /* 21 bytes of data in a frame */
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++); fpga = *(pdata++);
+ fpga = *(pdata++);
+
+ fpga = 0x4b; /* field check code */
+ fpga = 0xff; /* extended write cycle */
+ fpga = 0x4b; /* extended write cycle
+ * (actually 0x4b from bitgen.exe)
+ */
+ fpga = 0xff; /* extended write cycle */
+ fpga = 0xff; /* extended write cycle */
+ fpga = 0xff; /* extended write cycle */
+ }
+
+ fpga = 0xff; /* startup byte */
+ fpga = 0xff; /* startup byte */
+ fpga = 0xff; /* startup byte */
+ fpga = 0xff; /* startup byte */
+
+#if 0 /* ### FIXME */
+ /* If didn't load all the data or FPGA_DONE is low the load failed.
+ * Maybe someday stop here and flash the status LED? The console
+ * is not configured, so can't print an error message. Can't write
+ * global variables to set a flag (except gd?).
+ * For now it must work.
+ */
+#endif
+
+ /* Now that the FPGA is loaded, set up the Dual UART chip
+ * selects. Must be done here since it may be used as the console.
+ */
+ upmconfig(UPMB, (uint *)duart_table, sizeof(duart_table)/sizeof(uint));
+
+ memctl->memc_mbmr = DUART_MBMR;
+ memctl->memc_or5 = DUART_OR_VALUE;
+ memctl->memc_br5 = DUART_BR5_VALUE;
+ memctl->memc_or6 = DUART_OR_VALUE;
+ memctl->memc_br6 = DUART_BR6_VALUE;
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* base address for SRAM, assume 32-bit port, valid */
+#define NVRAM_BR_VALUE (CFG_SRAM_BASE | BR_PS_32 | BR_V)
+
+/* up to 64MB - will be adjusted for actual size */
+#define NVRAM_OR_PRELIM (ORMASK(CFG_SRAM_SIZE) \
+ | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR)
+/*
+ * Miscellaneous platform dependent initializations after running in RAM.
+ */
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ bd_t *bd = gd->bd;
+
+ memctl->memc_or2 = NVRAM_OR_PRELIM;
+ memctl->memc_br2 = NVRAM_BR_VALUE;
+
+ /* Is there any SRAM? Is it 16 or 32 bits wide? */
+
+ /* First look for 32-bit SRAM */
+ bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+
+ if (bd->bi_sramsize == 0) {
+ /* no 32-bit SRAM, but there could be 16-bit SRAM since
+ * it would report size 0 when configured for 32-bit bus.
+ * Try again with a 16-bit bus.
+ */
+ memctl->memc_br2 |= BR_PS_16;
+ bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+ }
+
+ if (bd->bi_sramsize == 0) {
+ memctl->memc_br2 = 0; /* disable select since nothing there */
+ }
+ else {
+ /* adjust or2 for actual size of SRAM */
+ memctl->memc_or2 |= ORMASK(bd->bi_sramsize);
+ bd->bi_sramstart = CFG_SRAM_BASE;
+ printf("SRAM: %lu KB\n", bd->bi_sramsize >> 10);
+ }
+
+
+ /* set standard MPC8xx clock so kernel will see the time
+ * even if it doesn't have a DS1306 clock driver.
+ * This helps with experimenting with standard kernels.
+ */
+ {
+ ulong tim;
+ struct rtc_time tmp;
+
+ rtc_get(&tmp); /* get time from DS1306 RTC */
+
+ /* convert to seconds since 1970 */
+ tim = mktime(tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
+ tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
+
+ immap->im_sitk.sitk_rtck = KAPWR_KEY;
+ immap->im_sit.sit_rtc = tim;
+ }
+
+#if 0
+ /* The code below is no longer valid since the prototype of
+ * eth_init() and eth_halt() have been changed to support
+ * multi-ethernet feature in U-Boot; the eth_initialize()
+ * routine should be called before any access to the ethernet
+ * callbacks.
+ */
+
+ /* FIXME - for now init ethernet to force PHY special mode */
+ eth_init(bd);
+ eth_halt();
+#endif
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ *
+ * The memory size MUST be a power of 2 for this to work.
+ *
+ * The only memory modified is 4 bytes at offset 0. This is important
+ * since for the SRAM this location is reserved for autosizing, so if
+ * it is modified and the board is reset before ram_size() completes
+ * no damage is done. Normally even the memory at 0 is preserved. The
+ * higher SRAM addresses may contain battery backed RAM disk data which
+ * must never be corrupted.
+ */
+
+static long ram_size(ulong *base, long maxsize)
+{
+ volatile long *test_addr;
+ volatile long *base_addr = base;
+ volatile long *flash = (volatile long*)CFG_FLASH_BASE;
+ ulong ofs; /* byte offset from base_addr */
+ ulong save; /* to make test non-destructive */
+ ulong junk;
+ long ramsize = -1; /* size not determined yet */
+
+ save = *base_addr; /* save value at 0 so can restore */
+
+ /* is any SRAM present? */
+ *base_addr = 0x5555aaaa;
+
+ /* use flash read to modify data bus, since with no SRAM present
+ * the data bus may retain the value if our code is running
+ * completely in the cache.
+ */
+ junk = *flash;
+
+ if (*base_addr != 0x5555aaaa)
+ ramsize = 0; /* no RAM present, or defective */
+ else {
+ *base_addr = 0xaaaa5555;
+ junk = *flash; /* use flash read to modify data bus */
+ if (*base_addr != 0xaaaa5555)
+ ramsize = 0; /* no RAM present, or defective */
+ }
+
+ /* now size it if any is present */
+ for (ofs = 4; ofs < maxsize && ramsize < 0; ofs <<= 1) {
+ test_addr = (long*)((long)base_addr + ofs); /* location to test */
+
+ *base_addr = ~*test_addr;
+ if (*base_addr == *test_addr)
+ ramsize = ofs; /* wrapped back to 0, so this is the size */
+ }
+
+ *base_addr = save; /* restore value at 0 */
+ return (ramsize);
+}
+
+/* ------------------------------------------------------------------------- */
+/* sdram table based on the FADS manual */
+/* for chip MB811171622A-100 */
+
+/* this table is for 50MHz operation, it should work at all lower speeds */
+
+const uint sdram_table[] =
+{
+ /* single read. (offset 0 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+ 0x1ff77c47,
+
+ /* precharge and Mode Register Set initialization (offset 5).
+ * This is also entered at offset 6 to do Mode Register Set
+ * without the precharge.
+ */
+ 0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+ /* burst read. (offset 8 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+ 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* single write. (offset 18 in upm RAM) */
+ /* FADS had 0x1f27fc04, ...
+ * but most other boards have 0x1f07fc04, which
+ * sets GPL0 from A11MPC to 0 1/4 clock earlier,
+ * like the single read.
+ * This seems better so I am going with the change.
+ */
+ 0x1f07fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* burst write. (offset 20 in upm RAM) */
+ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+ 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* refresh. (offset 30 in upm RAM) */
+ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* exception. (offset 3c in upm RAM) */
+ 0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+
+/* ------------------------------------------------------------------------- */
+
+#define SDRAM_MAX_SIZE 0x10000000 /* max 256 MB SDRAM */
+
+/* precharge and set Mode Register */
+#define SDRAM_MCR_PRE (MCR_OP_RUN | MCR_UPM_A | /* select UPM */ \
+ MCR_MB_CS3 | /* chip select */ \
+ MCR_MLCF(1) | MCR_MAD(5)) /* 1 time at 0x05 */
+
+/* set Mode Register, no precharge */
+#define SDRAM_MCR_MRS (MCR_OP_RUN | MCR_UPM_A | /* select UPM */ \
+ MCR_MB_CS3 | /* chip select */ \
+ MCR_MLCF(1) | MCR_MAD(6)) /* 1 time at 0x06 */
+
+/* runs refresh loop twice so get 8 refresh cycles */
+#define SDRAM_MCR_REFR (MCR_OP_RUN | MCR_UPM_A | /* select UPM */ \
+ MCR_MB_CS3 | /* chip select */ \
+ MCR_MLCF(2) | MCR_MAD(0x30)) /* twice at 0x30 */
+
+/* MAMR values work in either mamr or mbmr */
+/* 8 column SDRAM */
+#define SDRAM_MAMR_8COL /* refresh at 50MHz */ \
+ ((195 << MAMR_PTA_SHIFT) | MAMR_PTAE \
+ | MAMR_AMA_TYPE_0 /* Address MUX 0 */ \
+ | MAMR_DSA_1_CYCL /* 1 cycle disable */ \
+ | MAMR_G0CLA_A11 /* GPL0 A11[MPC] */ \
+ | MAMR_RLFA_1X /* Read loop 1 time */ \
+ | MAMR_WLFA_1X /* Write loop 1 time */ \
+ | MAMR_TLFA_4X) /* Timer loop 4 times */
+
+/* 9 column SDRAM */
+#define SDRAM_MAMR_9COL ((SDRAM_MAMR_8COL & (~MAMR_G0CLA_A11)) | MAMR_G0CLA_A10)
+
+/* base address 0, 32-bit port, SDRAM UPM, valid */
+#define SDRAM_BR_VALUE (BR_PS_32 | BR_MS_UPMA | BR_V)
+
+/* up to 256MB, SAM, G5LS - will be adjusted for actual size */
+#define SDRAM_OR_PRELIM (ORMASK(SDRAM_MAX_SIZE) | OR_CSNT_SAM | OR_G5LS)
+
+/* This is the Mode Select Register value for the SDRAM.
+ * Burst length: 4
+ * Burst Type: sequential
+ * CAS Latency: 2
+ * Write Burst Length: burst
+ */
+#define SDRAM_MODE 0x22 /* CAS latency 2, burst length 4 */
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ uint size_sdram = 0;
+ uint size_sdram9 = 0;
+ uint base = 0; /* SDRAM must start at 0 */
+ int i;
+
+ upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+ /* Configure the refresh (mostly). This needs to be
+ * based upon processor clock speed and optimized to provide
+ * the highest level of performance.
+ *
+ * Preliminary prescaler for refresh.
+ * This value is selected for four cycles in 31.2 us,
+ * which gives 8192 cycles in 64 milliseconds.
+ * This may be too fast, but works for any memory.
+ * It is adjusted to 4096 cycles in 64 milliseconds if
+ * possible once we know what memory we have.
+ *
+ * We have to be careful changing UPM registers after we
+ * ask it to run these commands.
+ *
+ * PTA - periodic timer period for our design is
+ * 50 MHz x 31.2us
+ * --------------- = 195
+ * 1 x 8 x 1
+ *
+ * 50MHz clock
+ * 31.2us refresh interval
+ * SCCR[DFBRG] 0
+ * PTP divide by 8
+ * 1 chip select
+ */
+ memctl->memc_mptpr = MPTPR_PTP_DIV8; /* 0x0800 */
+ memctl->memc_mamr = SDRAM_MAMR_8COL & (~MAMR_PTAE); /* no refresh yet */
+
+ /* The SDRAM Mode Register value is shifted left 2 bits since
+ * A30 and A31 don't connect to the SDRAM for 32-bit wide memory.
+ */
+ memctl->memc_mar = SDRAM_MODE << 2; /* MRS code */
+ udelay(200); /* SDRAM needs 200uS before set it up */
+
+ /* Now run the precharge/nop/mrs commands. */
+ memctl->memc_mcr = SDRAM_MCR_PRE;
+ udelay(2);
+
+ /* Run 8 refresh cycles (2 sets of 4) */
+ memctl->memc_mcr = SDRAM_MCR_REFR; /* run refresh twice */
+ udelay(2);
+
+ /* some brands want Mode Register set after the refresh
+ * cycles. This shouldn't hurt anything for the brands
+ * that were happy with the first time we set it.
+ */
+ memctl->memc_mcr = SDRAM_MCR_MRS;
+ udelay(2);
+
+ memctl->memc_mamr = SDRAM_MAMR_8COL; /* enable refresh */
+ memctl->memc_or3 = SDRAM_OR_PRELIM;
+ memctl->memc_br3 = SDRAM_BR_VALUE + base;
+
+ /* Some brands need at least 10 DRAM accesses to stabilize.
+ * It wont hurt the brands that don't.
+ */
+ for (i=0; i<10; ++i) {
+ volatile ulong *addr = (volatile ulong *)base;
+ ulong val;
+
+ val = *(addr + i);
+ *(addr + i) = val;
+ }
+
+ /* Check SDRAM memory Size in 8 column mode.
+ * For a 9 column memory we will get half the actual size.
+ */
+ size_sdram = ram_size((ulong *)0, SDRAM_MAX_SIZE);
+
+ /* Check SDRAM memory Size in 9 column mode.
+ * For an 8 column memory we will see at most 4 megabytes.
+ */
+ memctl->memc_mamr = SDRAM_MAMR_9COL;
+ size_sdram9 = ram_size((ulong *)0, SDRAM_MAX_SIZE);
+
+ if (size_sdram < size_sdram9) /* leave configuration at 9 columns */
+ size_sdram = size_sdram9;
+ else /* go back to 8 columns */
+ memctl->memc_mamr = SDRAM_MAMR_8COL;
+
+ /* adjust or3 for actual size of SDRAM
+ */
+ memctl->memc_or3 |= ORMASK(size_sdram);
+
+ /* Adjust refresh rate depending on SDRAM type.
+ * For types > 128 MBit (32 Mbyte for 2 x16 devices) leave
+ * it at the current (fast) rate.
+ * For 16, 64 and 128 MBit half the rate will do.
+ */
+ if (size_sdram <= 32 * 1024 * 1024)
+ memctl->memc_mptpr = MPTPR_PTP_DIV16; /* 0x0400 */
+
+ return (size_sdram);
+}
+