summaryrefslogtreecommitdiff
path: root/board/siemens
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2015-06-16 14:59:34 +0200
committerTom Rini <trini@konsulko.com>2015-06-19 16:46:47 -0400
commit61159b76844437bf9004c3a38b5a4ff1a24860d5 (patch)
tree8c0e50ce0f93d328c724bd42839a8572e80465b9 /board/siemens
parent8607c4f127d0f2a6d2572960821443563f4eca51 (diff)
arm, am33xx: update for siemens am335x based boards
updates for the siemens am335x based boards: - draco: add delay for DDR3 configuration - change MTD partition layout and add a possibility to redefine MTD layout in board header. - move ubi support to common header file - draco: improve dtb naming - draco: set CONFIG_SYS_CBSIZE to 1024 - add generic env based led Leds can now be defined in Environment - add generic env based dfu button Which gpio is used for the dfu button can be defined through the Environment - set MACH_TYPE only if defined - draco: increase CPU freq to 300MHz - Add time command to siemens am33xx boards - DDR3: increase default tRFC - draco: enable pullup for DFU and ERST pin - change print format DDR3 Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board/siemens')
-rw-r--r--board/siemens/common/board.c176
-rw-r--r--board/siemens/draco/board.c43
-rw-r--r--board/siemens/draco/board.h13
-rw-r--r--board/siemens/draco/mux.c4
4 files changed, 168 insertions, 68 deletions
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index fb2de48fbc2..c127f6ca271 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -75,8 +75,9 @@ int board_init(void)
i2c_set_bus_num(0);
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
-
+#ifdef CONFIG_MACH_TYPE
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_FACTORYSET
@@ -102,21 +103,29 @@ const struct dpll_params *get_dpll_ddr_params(void)
}
#ifndef CONFIG_SPL_BUILD
+
+#define MAX_NR_LEDS 10
+#define MAX_PIN_NUMBER 128
+#define STARTUP 0
+
#if defined(BOARD_DFU_BUTTON_GPIO)
-/*
- * This command returns the status of the user button on
- * Input - none
- * Returns - 1 if button is held down
- * 0 if button is not held down
- */
-static int
-do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+unsigned char get_button_state(char * const envname, unsigned char def)
{
int button = 0;
int gpio;
+ char *ptr_env;
- gpio = BOARD_DFU_BUTTON_GPIO;
- gpio_request(gpio, "DFU");
+ /* If button is not found we take default */
+ ptr_env = getenv(envname);
+ if (NULL == ptr_env) {
+ gpio = def;
+ } else {
+ gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0);
+ if (gpio > MAX_PIN_NUMBER)
+ gpio = def;
+ }
+
+ gpio_request(gpio, "");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
button = 1;
@@ -127,53 +136,27 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return button;
}
-
-U_BOOT_CMD(
- dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
- "Return the status of the DFU button",
- ""
-);
-#endif
-/*
- * This command sets led
- * Input - name of led
- * value of led
- * Returns - 1 if input does not match
- * 0 if led was set
+/**
+ * This command returns the status of the user button on
+ * Input - none
+ * Returns - 1 if button is held down
+ * 0 if button is not held down
*/
static int
-do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int gpio = 0;
- if (argc != 3)
- goto exit;
-#if defined(BOARD_STATUS_LED)
- if (!strcmp(argv[1], "stat"))
- gpio = BOARD_STATUS_LED;
-#endif
-#if defined(BOARD_DFU_BUTTON_LED)
- if (!strcmp(argv[1], "dfu"))
- gpio = BOARD_DFU_BUTTON_LED;
-#endif
- /* If argument does not mach exit */
- if (gpio == 0)
- goto exit;
- gpio_request(gpio, "");
- gpio_direction_output(gpio, 1);
- if (!strcmp(argv[2], "1"))
- gpio_set_value(gpio, 1);
- else
- gpio_set_value(gpio, 0);
- return 0;
-exit:
- return 1;
+ int button = 0;
+ button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO);
+ button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO);
+ return button;
}
U_BOOT_CMD(
- led, CONFIG_SYS_MAXARGS, 2, do_setled,
- "Set led on or off",
- "dfu val - set dfu led\nled stat val - set status led"
+ dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
+ "Return the status of the DFU button",
+ ""
);
+#endif
static int
do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -189,4 +172,95 @@ U_BOOT_CMD(
"Sends U-Boot into infinite loop",
""
);
+
+/**
+ * Get led gpios from env and set them.
+ * The led define in environment need to need to be of the form ledN=NN,S0,S1
+ * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0
+ * defines the startup state of the led, S1 the special state of the led when
+ * it enters e.g. dfu mode.
+ */
+void set_env_gpios(unsigned char state)
+{
+ char *ptr_env;
+ char str_tmp[5]; /* must contain "ledX"*/
+ char num[1];
+ unsigned char i, idx, pos1, pos2, ccount;
+ unsigned char gpio_n, gpio_s0, gpio_s1;
+
+ for (i = 0; i < MAX_NR_LEDS; i++) {
+ strcpy(str_tmp, "led");
+ sprintf(num, "%d", i);
+ strcat(str_tmp, num);
+
+ /* If env var is not found we stop */
+ ptr_env = getenv(str_tmp);
+ if (NULL == ptr_env)
+ break;
+
+ /* Find sperators position */
+ pos1 = 0;
+ pos2 = 0;
+ ccount = 0;
+ for (idx = 0; ptr_env[idx] != '\0'; idx++) {
+ if (ptr_env[idx] == ',') {
+ if (ccount++ < 1)
+ pos1 = idx;
+ else
+ pos2 = idx;
+ }
+ }
+ /* Bad led description skip this definition */
+ if (pos2 <= pos1 || ccount > 2)
+ continue;
+
+ /* Get pin number and request gpio */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env, pos1*sizeof(char));
+ gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0);
+
+ /* Invalid gpio number skip definition */
+ if (gpio_n > MAX_PIN_NUMBER)
+ continue;
+
+ gpio_request(gpio_n, "");
+
+ if (state == STARTUP) {
+ /* get pin state 0 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strncpy(str_tmp, ptr_env+pos1+1,
+ (pos2-pos1-1)*sizeof(char));
+ gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+
+ gpio_direction_output(gpio_n, gpio_s0);
+
+ } else {
+ /* get pin state 1 and set */
+ memset(str_tmp, 0, sizeof(str_tmp));
+ strcpy(str_tmp, ptr_env+pos2+1);
+ gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL,
+ 0);
+ gpio_direction_output(gpio_n, gpio_s1);
+ }
+ } /* loop through defined led in environment */
+}
+
+static int do_board_led(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+ if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP)
+ set_env_gpios(0);
+ else
+ set_env_gpios(1);
+ return 0;
+};
+
+U_BOOT_CMD(
+ draco_led, CONFIG_SYS_MAXARGS, 2, do_board_led,
+ "Set LEDs defined in environment",
+ "<0|1>"
+);
#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index ede73baf3e9..2697762076a 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -43,7 +43,7 @@ static struct draco_baseboard_id __attribute__((section(".data"))) settings;
/* Default@303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
- 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32,
0x0000093B, 0x0000014A,
"default name @303MHz \0",
"default marking \0",
@@ -71,8 +71,8 @@ static void print_ddr3_timings(void)
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
printf("device:\t\t%s\n", settings.ddr3.manu_name);
printf("marking:\t%s\n", settings.ddr3.manu_marking);
- printf("timing parameters\n");
- printf("diff\teeprom\tdefault\n");
+ printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom",
+ "default", "diff");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
@@ -96,9 +96,12 @@ static void print_ddr3_timings(void)
static void print_chip_data(void)
{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
printf("\nCPU BOARD\n");
printf("device: \t'%s'\n", settings.chip.sdevname);
printf("hw version: \t'%s'\n", settings.chip.shwver);
+ printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m);
}
#endif /* CONFIG_SPL_BUILD */
@@ -193,6 +196,11 @@ struct ctrl_ioregs draco_ddr3_ioregs = {
config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
+
+ /* For Samsung 2Gbit RAM we need this delay otherwise config fails after
+ * soft reset.
+ */
+ udelay(2000);
}
static void spl_siemens_board_init(void)
@@ -201,6 +209,26 @@ static void spl_siemens_board_init(void)
}
#endif /* if def CONFIG_SPL_BUILD */
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ omap_nand_switch_ecc(1, 8);
+#ifdef CONFIG_FACTORYSET
+ /* Set ASN in environment*/
+ if (factory_dat.asn[0] != 0) {
+ setenv("dtb_name", (char *)factory_dat.asn);
+ } else {
+ /* dtb suffix gets added in load script */
+ setenv("dtb_name", "am335x-draco");
+ }
+#else
+ setenv("dtb_name", "am335x-draco");
+#endif
+
+ return 0;
+}
+#endif
+
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
@@ -280,13 +308,4 @@ U_BOOT_CMD(
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- omap_nand_switch_ecc(1, 8);
-
- return 0;
-}
-#endif
-
#include "../common/board.c"
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
index ff8ab764c51..8856fd0f861 100644
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@@ -16,9 +16,13 @@
#ifndef _BOARD_H_
#define _BOARD_H_
-#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \
- settings.ddr3.x, ddr3_default.x
-#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
+#define PARGS(x) #x , /* Parameter Name */ \
+ settings.ddr3.x, /* EEPROM Value */ \
+ ddr3_default.x, /* Default Value */ \
+ settings.ddr3.x-ddr3_default.x /* Difference */
+
+#define PRINTARGS(y) printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
+
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
@@ -69,4 +73,7 @@ void enable_uart4_pin_mux(void);
void enable_uart5_pin_mux(void);
void enable_i2c0_pin_mux(void);
void enable_board_pin_mux(void);
+
+/* Forwared declaration, defined in common board.c */
+void set_env_gpios(unsigned char state);
#endif
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
index eaa3c70798e..dbcc80b61ff 100644
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@@ -60,7 +60,7 @@ static struct module_pin_mux nand_pin_mux[] = {
static struct module_pin_mux gpios_pin_mux[] = {
/* DFU button GPIO0_27*/
- {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
+ {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
{OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */
{OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */
/* Triacs in HW Rev 2 */
@@ -222,7 +222,7 @@ static struct module_pin_mux gpios_pin_mux[] = {
{OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
{OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
/* nRST for SMSC LAN9303 switch - GPIO2_24 */
- {OFFSET(lcd_pclk), MODE(7) }, /* LAN9303 nRST */
+ {OFFSET(lcd_pclk), MODE(7) | PULLUDEN | PULLUP_EN }, /* LAN9303 nRST */
{-1},
};