* Patches by Richard Woodruff, 01 Oct 2004:

  add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.

8 files changed, 2246 insertions, 0 deletions

diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile
new file mode 100644
index 00000000000..deab6b6d1c9
--- /dev/null
+++ b/board/omap2420h4/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= omap2420h4.o flash.o mem.o sys_info.o
+SOBJS	:= platform.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
new file mode 100644
index 00000000000..1c770f30acd
--- /dev/null
+++ b/board/omap2420h4/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+#
+# TI H4 board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
+# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+# CONFIG_PARTIAL_SRAM must be defined to use this.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+# Comment out //CONFIG_PARTIAL_SRAM for this one.
+#
+#TEXT_BASE = 0x40280000
+
diff --git a/board/omap2420h4/flash.c b/board/omap2420h4/flash.c
new file mode 100644
index 00000000000..3b6a69f57bc
--- /dev/null
+++ b/board/omap2420h4/flash.c
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sizes.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE	SZ_128K
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+# define FLASH_PORT_WIDTH		ushort
+# define FLASH_PORT_WIDTHV		vu_short
+# define SWAP(x)			__swab16(x)
+#else
+# define FLASH_PORT_WIDTH		ulong
+# define FLASH_PORT_WIDTHV		vu_long
+# define SWAP(x)			__swab32(x)
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+	{4, SZ_32K},		/* 4 * 32kBytes sectors */
+	{255, SZ_128K},		/* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+void flash_unlock(flash_info_t * info, int bank);
+int flash_probe(void);
+
+/*-----------------------------------------------------------------------
+ */
+
+/* see if flash is ok */
+int flash_probe(void)
+{
+	return(flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[0]));
+}
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			/* to reset the lock bit */
+			flash_unlock(&flash_info[i],i);
+			break;
+		case 1:
+			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+			/* to reset the lock bit */
+			flash_unlock(&flash_info[i],i);
+			break;
+
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_FLASH_BASE,
+				   CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_ENV_ADDR,
+				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_unlock(flash_info_t * info, int bank)
+{
+	int j;
+	if (!bank)
+		j=2;	/* leave 0,1 locked for boot bank */
+	else
+		j=0;	/* get the whole bank for #2 */
+
+	for (;j<CFG_MAX_FLASH_SECT;j++) {
+		FPWV *addr = (FPWV *) (info->start[j]);
+		if (addr == NULL) {
+			printf("Warning Flash probe failed\n");
+			break;
+		}
+		flash_unprotect_sectors (addr);
+		*addr = (FPW) 0x00500050;/* clear status register */
+		*addr = (FPW) 0x00FF00FF;/* resest to read mode */
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	volatile int r;	 /* gcc 3.4.0-1 strangeness, need to follow up.*/
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			if (i > 254) { /* 255,256,257,258 */
+				r=i;
+				info->start[i] = base + (((r-(int)255) * SZ_32K) + (255*PHYS_FLASH_SECT_SIZE));
+				info->protect[i] = 0;
+			} else {
+				info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+				info->protect[i] = 0;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F256L18T:
+		printf ("FLASH 28F256L18T\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+				info->start[i], info->protect[i] ? " (RO)" : "	   ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+	/* mb();  this one makes ARM11 err go away, but I want it :) as a guide to problems */
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0] & 0xFF;	/* just looking for 89 (8989 is hw pat)*/
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return(0);		   /* no or unknown flash	*/
+	}
+
+	mb ();
+	value = addr[1];	/* device ID */
+	switch (value) {
+
+	case (FPW) (INTEL_ID_28F256L18T):	 /* 880D */
+		info->flash_id += FLASH_28F256L18T;
+		info->sector_count = 259;	/*0-258*/
+		info->size = SZ_32M;
+		break;			/* => 32 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+				info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return(info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK    0x0080
+
+	*addr = (FPW) 0x00500050;	/* clear status register */
+
+	/* this sends the clear lock bit command */
+	*addr = (FPW) 0x00600060;
+	*addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+#ifdef CONFIG_USE_IRQ
+	int iflag;
+#endif
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+				info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+				prot);
+	} else {
+		printf ("\n");
+	}
+
+
+	start = get_timer (0);
+	last = start;
+
+#ifdef CONFIG_USE_IRQ
+	/* Disable interrupts which might cause a timeout here */
+	iflag = disable_interrupts ();
+#endif
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			flash_unprotect_sectors (addr);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;/* clear status register */
+			*addr = (FPW) 0x00200020;/* erase setup */
+			*addr = (FPW) 0x00D000D0;/* erase confirm */
+
+			while (((status =
+					 *addr) & (FPW) 0x00800080) !=
+				   (FPW) 0x00800080) {
+				if (get_timer_masked () >
+					CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					/* suspend erase     */
+					*addr = (FPW) 0x00B000B0;
+					/* reset to read mode */
+					*addr = (FPW) 0x00FF00FF;
+					rcode = 1;
+					break;
+				}
+			}
+
+			/* clear status register cmd.	*/
+			*addr = (FPW) 0x00500050;
+			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
+			printf (" done\n");
+		}
+	}
+#ifdef CONFIG_USE_IRQ
+	if (iflag)
+		enable_interrupts();
+#endif
+
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return(rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return(rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return(0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return(write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+#ifdef CONFIG_USE_IRQ
+	int iflag;
+#endif
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		return(2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+#ifdef CONFIG_USE_IRQ
+	iflag = disable_interrupts ();
+#endif
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return(1);
+		}
+	}
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+
+#ifdef CONFIG_USE_IRQ
+	if (iflag)
+		enable_interrupts();
+#endif
+
+	return(0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
new file mode 100644
index 00000000000..a3b34536062
--- /dev/null
+++ b/board/omap2420h4/mem.c
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+/************************************************************
+ * sdelay() - simple spin loop.  Will be constant time as
+ *  its generally used in 12MHz bypass conditions only.  This
+ *  is necessary until timers are accessible.
+ *
+ *  not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+					  "subs %0, %1, #1\n"
+					  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*********************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
+ *   -- called from SRAM, or Flash (using temp SRAM stack).
+ *********************************************************************************/
+void prcm_init(void)
+{
+	u32 rev,div;
+#ifdef CONFIG_PARTIAL_SRAM
+	void (*f_lock_pll) (u32, u32, u32, u32);
+	extern void *_end_vect, *_start;
+
+	f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
+#endif
+
+	__raw_writel(0, CM_FCLKEN1_CORE);	   /* stop all clocks to reduce ringing */
+	__raw_writel(0, CM_FCLKEN2_CORE);	   /* may not be necessary */
+	__raw_writel(0, CM_ICLKEN1_CORE);
+	__raw_writel(0, CM_ICLKEN2_CORE);
+
+	__raw_writel(DPLL_OUT, CM_CLKSEL2_PLL);	/* set DPLL out */
+	__raw_writel(MPU_DIV, CM_CLKSEL_MPU);	/* set MPU divider */
+	__raw_writel(DSP_DIV, CM_CLKSEL_DSP);	/* set dsp and iva dividers */
+	__raw_writel(GFX_DIV, CM_CLKSEL_GFX);	/* set gfx dividers */
+
+	rev  = get_cpu_rev();
+	if (rev == CPU_2420_ES1 || rev ==  CPU_2422_ES1)
+		div = BUS_DIV_ES1;
+	else
+		div	= BUS_DIV;
+	__raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
+	sdelay(1000);
+
+#ifndef CONFIG_PARTIAL_SRAM
+	/* If running fully from SRAM this is OK.  The Flash bus drops out for just a little.
+	 * but then comes back.  If running from Flash this sequence kills you, thus you need
+	 * to run it using CONFIG_PARTIAL_SRAM.
+	 */
+	__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
+	wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
+
+	/* set clock selection and dpll dividers. */
+	__raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);	 /* set pll for target rate */
+	__raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
+	sdelay(10000);
+	__raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
+	sdelay(10000);
+	wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY);  /*wait for dpll lock */
+#else
+/* if running from flash, need to jump to small relocated code area in SRAM.
+ * This is the only safe spot to do configurations from.
+ */
+	(*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
+#endif
+
+	__raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL);   /* enable apll */
+	wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);	/* wait for apll lock */
+	sdelay(1000);
+}
+
+/***********************************************
+ * memif_init() - init the gpmc and sdrc
+ *  - early init routines, called from flash or
+ *  SRAM.
+ ***********************************************/
+void memif_init(void)
+{
+	sdrc_init();
+#ifndef CONFIG_PARTIAL_SRAM  /* don't init if calling from flash */
+	gpmc_init();
+#endif
+}
+
+/********************************************************
+ *  mem_ok() - test used to see if timings are correct
+ *             for a part. Helps in gussing which part
+ *             we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{  u32 val;
+	__raw_writel(0x0,OMAP2420_SDRC_CS0+0x400);  /* clear pos A */
+	__raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
+	val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
+	if (val != 0)                               /* see if pos A value changed*/
+		return(0);
+	else
+		return(1);
+}
+
+/********************************************************
+ *  sdrc_init() - init the sdrc chip selects CS0 and CS1
+ *  - early init routines, called from flash or
+ *  SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+	#define EARLY_INIT 1
+	do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);  /* only init up first bank here */
+}
+
+/**********************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ *  -called from low level code with stack only.
+ *  -code sets up SDRAM timing and muxing for 2422 or 2420.
+ *  -optimal settings can be placed here, or redone after i2c
+ *      inspection of board info
+ *
+ * !!! When ES1 comes out need to conditionalize RFR value!!!
+ **********************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+	u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
+	sdrc_data_t *sdata;	 /* do not change type */
+
+	static const sdrc_data_t sdrc_2422 =
+	{
+		H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
+		H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
+		H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+	};
+	static const sdrc_data_t sdrc_2420 =
+	{
+		H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
+		H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
+		H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
+	};
+
+	if (offset == SDRC_CS0_OSET)
+		cs0 = shared = 1;  /* int regs shared between both chip select */
+
+	cpu = get_cpu_type();
+
+	/* warning generated, though code generation is correct. this may bite later, but is ok for now.
+	 *  there is only so much C code you can do on stack only operation.
+	 */
+	if (cpu == CPU_2422)
+		sdata = &sdrc_2422;
+	else
+		sdata = &sdrc_2420;
+	__asm__ __volatile__("": : :"memory");
+#ifdef CONFIG_PARTIAL_SRAM
+	/* u-boot is compiled to run in DDR at 8xxxxxxx.  If we use data here which is not pc relative
+	 * we need to get the address correct.  We need to find the current flash mapping to dress up
+	 * the initial pointer load.  As long as this is const data we should be ok.
+	 */
+	if(early)
+		sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
+#endif
+
+	men_combo:
+
+	if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
+		pmask = BIT2;
+		first = 0;	/* trigger ddr_combo init */
+	}
+
+	if (shared) {
+		__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
+		__raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG);	/* reset sdrc */
+		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);	/* wait till reset done set */
+		__raw_writel(SMART_IDLE, SDRC_SYSCONFIG);		/* clear soft reset */
+		__raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
+		__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+	}
+	if (first)
+		__raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
+	else {
+		__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+		__raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
+	}
+
+	if (cs0) {
+		__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
+		__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
+	} else {
+		__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
+		__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
+	}
+
+	__raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
+
+	/* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
+	__raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
+	sdelay(5000);  /* susposed to be 100us per design spec for mddr*/
+	__raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
+	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+
+	/*
+	 * CSx SDRC Mode Register
+	 * Burst length = 4 - DDR memory
+	 * Serial mode
+	 * CAS latency = x
+	 */
+	__raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
+
+	/* NOTE: ES1 242x _BUG_ DLL */
+	rev  = get_cpu_rev();
+	if (rev == CPU_2420_ES1 || rev ==  CPU_2422_ES1)
+		bug = BIT0;
+	/* enable & load up DLL with good value for 75MHz, and set phase to 90% */
+	if (shared) {
+		__raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
+		__raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
+		__raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
+		__raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
+	}
+	sdelay(9000);
+	if (!first || mem_ok())	/* passed test or 2nd bank init */
+		return;
+	else {
+		first = 0;
+		goto men_combo;
+	}
+}
+
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+	u32 mux=0, mtype, mwidth;
+
+	/* global settings */
+	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
+	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
+	__raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+	__raw_writel(0x111, GPMC_CONFIG);	/* set nWP, disable limited addr */
+
+	/* discover bus connection from sysboot */
+	if (is_gpmc_muxed() == GPMC_MUXED)
+		mux = BIT9;
+	mtype = get_gpmc0_type();
+	mwidth = get_gpmc0_width();
+
+	/* setup cs0 */
+	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
+	sdelay(1000);
+	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
+	//__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+	__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+	__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+	//__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+	__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
+	sdelay(2000);
+
+	/* setup cs1 */
+	__raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
+	sdelay(1000);
+	__raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+	__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
+	sdelay(2000);
+}
+
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
new file mode 100644
index 00000000000..4696a713300
--- /dev/null
+++ b/board/omap2420h4/omap2420h4.c
@@ -0,0 +1,834 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+
+static void wait_for_command_complete(unsigned int wd_base);
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+					  "subs %0, %1, #1\n"
+					  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_PARTIAL_SRAM
+	s_init(0x0);  /* full sram build, never skip clock and sdrc, no point */
+#else
+	gpmc_init();
+#endif
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4;		/* board id for linux */
+	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100);	/* adress of boot parameters */
+
+	return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+void s_init(int skip)
+{
+	watchdog_init();
+	set_muxconf_regs();
+	delay(100);
+
+	if (!skip)
+		prcm_init();
+
+	peripheral_enable();
+	icache_enable();
+#ifndef CONFIG_APTIX
+	if (!skip)
+		memif_init();
+#endif
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r (void)
+{
+	ether_init(); /* better done here so timers are init'ed */
+	return(0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+	int mode;
+#define GP (BIT8|BIT9)
+
+	/* There are 4 watch dogs.  1 secure, and 3 general purpose.
+	 * I would expect that the ROM takes care of the secure one,
+	 * but we will try also.  Of the 3 GP ones, 1 can reset us
+	 * directly, the other 2 only generate MPU interrupts.
+	 */
+	mode = (__raw_readl(CONTROL_STATUS) & (BIT8|BIT9));
+	if (mode == GP) {
+		__raw_writel(WD_UNLOCK1 ,WD1_BASE+WSPR);
+		wait_for_command_complete(WD1_BASE);
+		__raw_writel(WD_UNLOCK2 ,WD1_BASE+WSPR);
+	}
+	__raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
+	wait_for_command_complete(WD2_BASE);
+	__raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
+
+#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
+	__raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
+	wait_for_command_complete(WD3_BASE);
+	__raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
+
+	__raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
+	wait_for_command_complete(WD4_BASE);
+	__raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+static void wait_for_command_complete(unsigned int wd_base)
+{
+	int pending = 1;
+	do {
+		pending = __raw_readl(wd_base+WWPS);
+	} while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ *  		   for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init (void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+	int cnt = 20;
+
+	__raw_writew(0x0, LAN_RESET_REGISTER);
+	do {
+		__raw_writew(0x1, LAN_RESET_REGISTER);
+		udelay (100);
+		if (cnt == 0)
+			goto h4reset_err_out;
+		--cnt;
+	} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+	cnt = 20;
+
+	do {
+		__raw_writew(0x0, LAN_RESET_REGISTER);
+		udelay (100);
+		if (cnt == 0)
+			goto h4reset_err_out;
+		--cnt;
+	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+	udelay (1000);
+
+	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+	udelay (1000);
+
+	h4reset_err_out:
+	return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int size0=0,size1=0;
+	u32 mtype, btype;
+#define NOT_EARLY 0
+
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
+
+	btype = get_board_type();
+	mtype = get_mem_type();
+
+	display_board_info(btype);
+	if (btype == BOARD_H4_MENELAUS)
+		update_mux(btype,mtype);
+
+	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);	/* init other chip select */
+		size0 = size1 = SZ_32M;
+	} else
+		size0 = SZ_64M;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = size0;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = size1;
+
+	return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ *              specific to the hardware
+ *********************************************************/
+void set_muxconf_regs (void)
+{
+	muxSetupSDRC();
+	muxSetupGPMC();
+	muxSetupUsb0();
+	muxSetupUart3();
+	muxSetupI2C1();
+	muxSetupUART1();
+	muxSetupLCD();
+	muxSetupCamera();
+	muxSetupMMCSD();
+	muxSetupTouchScreen();
+	muxSetupHDQ();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+void peripheral_enable(void)
+{
+	unsigned int v, if_clks=0, func_clks=0;
+
+	/* Enable GP2 timer.*/
+	if_clks |= BIT4;
+	func_clks |= BIT4;
+	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4;	/* Sys_clk input OMAP2420_GPT2 */
+	__raw_writel(v, CM_CLKSEL2_CORE);
+	__raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+	/* Enable UART1 clock */
+	func_clks |= BIT21;
+	if_clks |= BIT21;
+#endif
+	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;	/* Interface clocks on */
+	__raw_writel(v,CM_ICLKEN1_CORE );
+	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+	__raw_writel(v, CM_FCLKEN1_CORE);
+	delay(1000);
+
+#ifndef KERNEL_UPDATED
+	{
+#define V1 0xffffffff
+#define V2 0x00000007
+
+		__raw_writel(V1, CM_FCLKEN1_CORE);
+		__raw_writel(V2, CM_FCLKEN2_CORE);
+		__raw_writel(V1, CM_ICLKEN1_CORE);
+		__raw_writel(V1, CM_ICLKEN2_CORE);
+	}
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0   (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+	volatile uint8   *MuxConfigReg;
+	volatile uint32  *otgCtrlReg;
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	/* setup for USB VBus detection */
+	otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
+	*otgCtrlReg |= 0x00040000; /* bit 18 */
+}
+
+/****************************************
+ * Routine: muxSetupUart3   (ostboot)
+ * Description: Setup uart3 muxing
+ *****************************************/
+void muxSetupUart3(void)
+{
+	volatile uint8 *MuxConfigReg;
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
+	*MuxConfigReg &= (uint8)(~0x1F);
+
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
+	*MuxConfigReg &= (uint8)(~0x1F);
+}
+
+/****************************************
+ * Routine: muxSetupI2C1   (ostboot)
+ * Description: Setup i2c muxing
+ *****************************************/
+void muxSetupI2C1(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* I2C1 Clock pin configuration, PIN = M19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* I2C1 Data pin configuration, PIN = L15 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* Pull-up required on data line */
+	/* external pull-up already present. */
+	/* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
+}
+
+/****************************************
+ * Routine: muxSetupUART1  (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* UART1_CTS pin configuration, PIN = D21 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+	/* UART1_RTS pin configuration, PIN = H21 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+	/* UART1_TX pin configuration, PIN = L20 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+	/* UART1_RX pin configuration, PIN = T21 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
+	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+}
+
+/****************************************
+ * Routine: muxSetupLCD   (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* LCD_D0 pin configuration, PIN = Y7  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D1 pin configuration, PIN = P10 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D2 pin configuration, PIN = V8  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D3 pin configuration, PIN = Y8  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D4 pin configuration, PIN = W8  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D5 pin configuration, PIN = R10 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D6 pin configuration, PIN = Y9  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D7 pin configuration, PIN = V9  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D8 pin configuration, PIN = W9  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D9 pin configuration, PIN = P11 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D10 pin configuration, PIN = V10 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D11 pin configuration, PIN = Y10 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D12 pin configuration, PIN = W10 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D13 pin configuration, PIN = R11 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D14 pin configuration, PIN = V11 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D15 pin configuration, PIN = W11 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D16 pin configuration, PIN = P12 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_D17 pin configuration, PIN = R12 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_PCLK pin configuration,   PIN = W6   */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_VSYNC pin configuration,  PIN = V7  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_HSYNC pin configuration,  PIN = Y6  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* LCD_ACBIAS pin configuration, PIN = W7 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupCamera  (ostboot)
+ * Description: Setup camera muxing
+ *****************************************/
+void muxSetupCamera(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* CAMERA_RSTZ  pin configuration, PIN = Y16 */
+	/* CAM_RST is connected through the I2C IO expander.*/
+	/* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
+	/* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled   */
+
+	/* CAMERA_XCLK  pin configuration, PIN = U3 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_LCLK  pin configuration, PIN = V5 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
+	*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_VSYNC pin configuration, PIN = U2 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_HSYNC pin configuration, PIN = T3 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT0 pin configuration, PIN = T4 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT1 pin configuration, PIN = V2 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT2 pin configuration, PIN = V3 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT3 pin configuration, PIN = U4 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT4 pin configuration, PIN = W2 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT5 pin configuration, PIN = V4 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT6 pin configuration, PIN = W3 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT7 pin configuration, PIN = Y2 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT8 pin configuration, PIN = Y4 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* CAMERA_DAT9 pin configuration, PIN = V6 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* SDMMC_CLKI pin configuration,  PIN = H15 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_CLKO pin configuration,  PIN = G19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_CMD pin configuration,   PIN = H18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	// External pull-ups are present.
+	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+	/* SDMMC_DAT0 pin configuration,  PIN = F20 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	// External pull-ups are present.
+	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+	/* SDMMC_DAT1 pin configuration,  PIN = H14 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	// External pull-ups are present.
+	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+	/* SDMMC_DAT2 pin configuration,  PIN = E19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	// External pull-ups are present.
+	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+	/* SDMMC_DAT3 pin configuration,  PIN = D19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+	// External pull-ups are present.
+	// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+	/* SDMMC_DDIR0 pin configuration, PIN = F19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_DDIR1 pin configuration, PIN = E20 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_DDIR2 pin configuration, PIN = F18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_DDIR3 pin configuration, PIN = E18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SDMMC_CDIR pin configuration,  PIN = G18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* MMC_CD pin configuration,      PIN = B3  ---2420IP ONLY---*/
+	/* MMC_CD for 2422IP=K1 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
+				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+
+	/* MMC_WP pin configuration,      PIN = B4  */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
+				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description:  Set up touch screen muxing
+ *******************************************/
+void muxSetupTouchScreen(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* SPI1_CLK pin configuration,  PIN = U18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SPI1_MOSI pin configuration, PIN = V20 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SPI1_MISO pin configuration, PIN = T18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* SPI1_nCS0 pin configuration, PIN = U19 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+	/* PEN_IRQ pin configuration,   PIN = P20 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
+				   *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupHDQ (ostboot)
+ * Description: setup 1wire mux
+ *****************************************/
+void muxSetupHDQ(void)
+{
+	volatile unsigned char  *MuxConfigReg;
+
+	/* HDQ_SIO pin configuration,  PIN = N18 */
+	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
+				   *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+ ***************************************************************/
+void muxSetupGPMC(void)
+{
+	volatile uint8 *MuxConfigReg;
+	volatile unsigned int *MCR = 0x4800008C;
+
+	/* gpmc_io_dir */
+	*MCR = 0x19000000;
+
+	/* NOR FLASH CS0 */
+	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
+				   *MuxConfigReg = 0x00 ;
+
+	/* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
+				   *MuxConfigReg = 0x01 ;
+
+	/* MPDB(Multi Port Debug Port) CS1 */
+	/* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
+				   *MuxConfigReg = 0x00 ;
+
+	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
+				   *MuxConfigReg = 0x00 ;
+
+
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC  (ostboot)
+ * Description: Configures balls which come up in protected mode
+ ****************************************************************/
+void muxSetupSDRC(void)
+{
+	volatile uint8 *MuxConfigReg;
+
+	/* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
+				   *MuxConfigReg = 0x00 ;
+
+	/* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
+				   *MuxConfigReg = 0x00 ;
+
+	/* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3	Pull/up - N/A */
+	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
+				   *MuxConfigReg = 0x00;
+
+	if (get_cpu_type() == CPU_2422) {
+		MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
+					   *MuxConfigReg = 0x1b;
+	}
+}
+
+/*****************************************************************************
+ * Routine: update_mux()
+ * Description: Update balls which are different beween boards.  All should be
+ *              updated to match functionaly.  However, I'm only updating ones
+ *              which I'll be using for now.  When power comes into play they
+ *              all need updating.
+ *****************************************************************************/
+void update_mux(u32 btype,u32 mtype)
+{
+	u32 cpu, base = OMAP2420_CTRL_BASE;
+	cpu = get_cpu_type();
+
+	if (btype == BOARD_H4_MENELAUS) {
+		if (cpu == CPU_2420) {
+			/* PIN = B3,  GPIO.0->KBR5,      mode 3,  (pun?),-DO-*/
+			__raw_writeb(0x3, base+0x30);
+			/* PIN = B13, GPIO.38->KBC6,     mode 3,  (pun?)-DO-*/
+			__raw_writeb(0x3, base+0xa3);
+			/* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
+			/* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
+			/* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
+			/* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
+			/* PIN = M1 (HSUSBOTG) */
+			/* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
+			__raw_writeb(0x3, base+0x9d);
+			/* PIN = U32, (WLAN_CLKREQ) */
+			/* PIN = Y11, WLAN */
+			/* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
+			__raw_writeb(0x3, base+0xe7);
+			/* PIN = AA8, mDOC */
+			/* PIN = AA10, BT */
+			/* PIN = AA13, WLAN */
+			/* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
+			__raw_writeb(0x3, base+0x10e);
+			/* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
+			__raw_writeb(0x3, base+0x110);
+			/* PIN = J15 HHUSB */
+			/* PIN = H19 HSUSB */
+			/* PIN = W13, P13, R13, W16 ... */
+			/* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
+			__raw_writeb(0x3, base+0xde);
+			/* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+			__raw_writeb(0x0, base+0x12c);
+			/* PIN = AA17->sys_clkreq        mode 0   -DO- */
+			__raw_writeb(0x0, base+0x136);
+		} else if (cpu == CPU_2422) {
+			/* PIN = B3,  GPIO.0->nc,        mode 3,  set above (pun?)*/
+			/* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
+			/* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
+			/* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
+			/* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
+			__raw_writeb(0x0, base+0x92);
+			/* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
+			/* PIN = M1 (HSUSBOTG) */
+			/* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
+			__raw_writeb(0x3, base+0x10c);
+			/* PIN = U32, (WLAN_CLKREQ) */
+			/* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
+			__raw_writeb(0x3, base+0x30);
+			/* PIN = AA8, mDOC */
+			/* PIN = AA10, BT */
+			/* PIN = AA12, WLAN */
+			/* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
+			__raw_writeb(0x3, base+0x10e);
+			/* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
+			__raw_writeb(0x3, base+0x110);
+			/* PIN = J15 HHUSB */
+			/* PIN = H19 HSUSB */
+			/* PIN = W13, P13, R13, W16 ... */
+			/* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
+			__raw_writeb(0x3, base+0xde);
+			/* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+			__raw_writeb(0x0, base+0x12c);
+			/* PIN = AA17->sys_clkreq        mode 0   -DO- */
+			__raw_writeb(0x0, base+0x136);
+		}
+
+	} else if (btype == BOARD_H4_SDP) {
+		if (cpu == CPU_2420) {
+			/* PIN = B3,  GPIO.0->nc         mode 3,  set above (pun?)*/
+			/* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
+			/* Pin = Y11 VLNQ */
+			/* Pin = AA4 VLNQ */
+			/* Pin = AA6 VLNQ */
+			/* Pin = AA8 VLNQ */
+			/* Pin = AA10 VLNQ */
+			/* Pin = AA12 VLNQ */
+			/* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
+			__raw_writeb(0x3, base+0x10e);
+			/* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
+			__raw_writeb(0x3, base+0x110);
+			/* PIN = J15 MDOC_nDMAREQ */
+			/* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
+			__raw_writeb(0x3, base+0x114);
+			/* PIN = W13, V12, P13, R13, W19, W16 ... */
+			/* PIN = AA17 sys_clkreq->bt_clk_req  mode 0  */
+		} else if (cpu == CPU_2422) {
+			/* PIN = B3,  GPIO.0->MMC_CD,    mode 3,  set above */
+			/* PIN = B13, GPIO.38->wlan_int, mode 3,  (pun?)*/
+			/* Pin = Y11 VLNQ */
+			/* Pin = AA4 VLNQ */
+			/* Pin = AA6 VLNQ */
+			/* Pin = AA8 VLNQ */
+			/* Pin = AA10 VLNQ */
+			/* Pin = AA12 VLNQ */
+			/* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
+			__raw_writeb(0x3, base+0x10e);
+			/* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
+			__raw_writeb(0x3, base+0x110);
+			/* PIN = J15 MDOC_nDMAREQ */
+			/* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
+			__raw_writeb(0x3, base+0x114);
+			/* PIN = W13, V12, P13, R13, W19, W16 ... */
+			/* PIN = AA17 sys_clkreq->bt_clk_req  mode 0 */
+		}
+	}
+}
+
+
diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S
new file mode 100644
index 00000000000..3728e846cdc
--- /dev/null
+++ b/board/omap2420h4/platform.S
@@ -0,0 +1,237 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+
+_TEXT_BASE:
+	.word	TEXT_BASE	/* sdram load addr from config.mk */
+
+#ifdef CONFIG_PARTIAL_SRAM
+
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+        /* Copy DPLL code into SRAM */ 
+        adr     r0, go_to_speed         /* get addr of clock setting code */
+        mov     r2, #384                /* r2 size to copy (div by 32 bytes) */
+        mov     r1, r1                  /* r1 <- dest address (passed in) */
+        add     r2, r2, r0              /* r2 <- source end address */
+next2:
+        ldmia   r0!, {r3-r10}           /* copy from source address [r0]    */
+        stmia   r1!, {r3-r10}           /* copy to   target address [r1]    */
+        cmp     r0, r2                  /* until source end address [r2]    */
+        bne     next2
+	mov	pc, lr                  /* back to caller */
+
+/* **************************************************************************** 
+ *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ *               -executed from SRAM.
+ *  R0 = PRCM_CLKCFG_CTRL - addr of valid reg
+ *  R1 = CM_CLKEN_PLL - addr dpll ctlr reg
+ *  R2 = dpll value
+ *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ ******************************************************************************/    
+.global go_to_speed
+ go_to_speed:
+        sub     sp, sp, #0x4 /* get some stack space */
+        str     r4, [sp]     /* save r4's value */
+
+        /* move into fast relock bypass */
+        ldr     r8, pll_ctl_add
+        mov     r4, #0x2
+        str     r4, [r8]
+        ldr     r4, pll_stat
+block:
+        ldr     r8, [r4]	/* wait for bypass to take effect */
+        and     r8, r8, #0x3
+        cmp     r8, #0x1
+        bne     block
+
+	/* set new dpll dividers _after_ in bypass */
+	ldr     r4, pll_div_add
+	ldr     r8, pll_div_val
+        str     r8, [r4]
+    
+        /* now prepare GPMC (flash) for new dpll speed */
+	/* flash needs to be stable when we jump back to it */
+        ldr     r4, cfg3_0_addr
+        ldr     r8, cfg3_0_val
+        str     r8, [r4]
+        ldr     r4, cfg4_0_addr
+        ldr     r8, cfg4_0_val
+        str     r8, [r4]
+        ldr     r4, cfg1_0_addr
+        ldr     r8, [r4]
+        orr     r8, r8, #0x3     /* up gpmc divider */
+        str     r8, [r4]
+
+	/* setup to 2x loop though code.  The first loop pre-loads the 
+         * icache, the 2nd commits the prcm config, and locks the dpll
+         */
+        mov     r4, #0x1000      /* spin spin spin */
+        mov     r8, #0x4         /* first pass condition & set registers */
+        cmp     r8, #0x4
+2:
+        ldrne   r8, [r3]         /* DPLL lock check */
+        and     r8, r8, #0x7
+        cmp     r8, #0x2
+        beq     4f
+3:
+        subeq   r8, r8, #0x1
+        streq   r8, [r0]         /* commit dividers (2nd time) */
+        nop
+lloop1:
+        sub     r4, r4, #0x1    /* Loop currently necessary else bad jumps */
+        nop
+        cmp     r4, #0x0
+        bne     lloop1
+        mov     r4, #0x40000
+        cmp     r8, #0x1
+        nop
+        streq   r2, [r1]        /* lock dpll (2nd time) */
+        nop
+lloop2:
+        sub     r4, r4, #0x1    /* loop currently necessary else bad jumps */
+        nop
+        cmp     r4, #0x0
+        bne     lloop2
+        mov     r4, #0x40000
+        cmp     r8, #0x1
+        nop
+        ldreq   r8, [r3]         /* get lock condition for dpll */
+        cmp     r8, #0x4         /* first time though? */
+        bne     2b
+        moveq   r8, #0x2         /* set to dpll check condition. */
+        beq     3b               /* if condition not true branch */
+4:  
+        ldr     r4, [sp]
+        add     sp, sp, #0x4     /* return stack space */
+        mov     pc, lr           /* back to caller, locked */        
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+cfg3_0_addr:
+    .word  GPMC_CONFIG3_0
+cfg3_0_val: 
+    .word  H4_24XX_GPMC_CONFIG3_0
+cfg4_0_addr:
+    .word  GPMC_CONFIG4_0
+cfg4_0_val:
+    .word  H4_24XX_GPMC_CONFIG4_0
+cfg1_0_addr:
+    .word  GPMC_CONFIG1_0
+pll_ctl_add:
+    .word CM_CLKEN_PLL
+pll_stat:
+    .word CM_IDLEST_CKGEN
+pll_div_add:
+    .word CM_CLKSEL1_PLL 
+pll_div_val:
+    .word DPLL_VAL	/* DPLL setting (300MHz default) */
+#endif            
+
+.globl platformsetup
+platformsetup:
+	mov r3, r0     /* save skip information */
+#ifdef CONFIG_APTIX
+	ldr	r0,	REG_SDRC_MCFG_0
+	ldr	r1,	VAL_SDRC_MCFG_0
+	str	r1,	[r0]
+	ldr	r0,	REG_SDRC_MR_0
+	ldr	r1,	VAL_SDRC_MR_0
+	str	r1,	[r0]
+	/* a ddr needs emr1 set here */
+	ldr	r0,	REG_SDRC_SHARING
+	ldr	r1,	VAL_SDRC_SHARING
+	str	r1,	[r0]
+       	ldr	r0,	REG_SDRC_RFR_CTRL_0
+	ldr	r1,	VAL_SDRC_RFR_CTRL_0
+	str	r1,	[r0]
+
+       /* little delay after init */
+       mov r2, #0x1800                        
+1:       
+        subs r2, r2, #0x1
+        bne 1b
+#endif
+#ifdef CONFIG_PARTIAL_SRAM
+	ldr	sp,	SRAM_STACK
+        str     ip,	[sp]    /* stash old link register */
+	mov	ip,	lr	/* save link reg across call */
+        mov     r0,     r3      /* pass skip info to s_init */
+        bl      s_init          /* go setup pll,mux,memory */
+        ldr     ip,	[sp]    /* restore save ip */
+	mov	lr,	ip	/* restore link reg */
+#endif
+	/* map interrupt controller */
+	ldr	r0,	VAL_INTH_SETUP
+	mcr	p15, 0, r0, c15, c2, 4
+
+	/* back to arch calling code */
+	mov	pc,	lr
+
+	/* the literal pools origin */
+	.ltorg
+
+REG_CONTROL_STATUS:
+	.word CONTROL_STATUS
+VAL_INTH_SETUP:
+	.word PERIFERAL_PORT_BASE
+SRAM_STACK:
+	.word LOW_LEVEL_SRAM_STACK
+
+#ifdef CONFIG_APTIX
+REG_SDRC_SHARING:
+	.word SDRC_SHARING
+REG_SDRC_MCFG_0:
+	.word SDRC_MCFG_0
+REG_SDRC_MR_0:
+	.word SDRC_MR_0
+REG_SDRC_RFR_CTRL_0:
+        .word SDRC_RFR_CTRL
+VAL_SDRC_SHARING:
+	.word VAL_H4_SDRC_SHARING
+VAL_SDRC_MCFG_0:
+	.word VAL_H4_SDRC_MCFG_0
+VAL_SDRC_MR_0:
+	.word VAL_H4_SDRC_MR_0
+VAL_SDRC_RFR_CTRL_0:
+        .word VAL_H4_SDRC_RFR_CTRL_0
+#endif
+
+
+
+
+
+
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
new file mode 100644
index 00000000000..b5fe9e39250
--- /dev/null
+++ b/board/omap2420h4/sys_info.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h>  /* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <i2c.h>
+
+/**************************************************************************
+ * get_cpu_type() - low level get cpu type
+ * - no C globals yet.
+ * - just looking to say if this is a 2422 or 2420 or ...
+ * - to start with we will look at switch settings..
+ * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
+ *   (mux for 2420, non-mux for 2422).
+ ***************************************************************************/
+u32 get_cpu_type(void)
+{
+	u32 v;
+
+	v = __raw_readl(TAP_IDCODE_REG);
+	v &= CPU_24XX_ID_MASK;
+	if (v == CPU_2420_CHIPID) {	  /* currently 2420 and 2422 have same id */
+		if (is_gpmc_muxed() == GPMC_MUXED)	  /* if mux'ed */
+			return(CPU_2420);
+		else
+			return(CPU_2422);
+	} else
+		return(CPU_2420); /* don't know, say 2420 */
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+	u32 v;
+	v = __raw_readl(TAP_IDCODE_REG);
+	v = v >> 28;
+	return(v+1);  /* currently 2422 and 2420 match up */
+}
+
+/***********************************************************
+ * get_mem_type() - identify type of mDDR part used.
+ * 2422 uses stacked DDR, 2 parts CS0/CS1.
+ * 2420 may have 1 or 2, no good way to know...only init 1...
+ * when eeprom data is up we can select 1 more.
+ *************************************************************/
+u32 get_mem_type(void)
+{
+	if (get_cpu_type() == CPU_2422)
+		return(DDR_STACKED);
+
+	if (get_board_type() == BOARD_H4_MENELAUS)
+		return(DDR_COMBO);
+	else
+		return(DDR_DISCRETE);
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ *  --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
+ *      when they are available we can get info from there.  This should
+ *      be correct of all known boards up until today.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+	if (i2c_probe(I2C_MENELAUS) == 0)
+		return(BOARD_H4_MENELAUS);
+	else
+		return(BOARD_H4_SDP);
+}
+
+/******************************************************************
+ * get_sysboot_value() - get init word settings (dip switch on h4)
+ ******************************************************************/
+u32 get_sysboot_value(void)
+{
+	return(0x00000FFF & __raw_readl(CONTROL_STATUS));
+}
+
+/***************************************************************************
+ *  get_gpmc0_base() - Return current address hardware will be
+ *     fetching from. The below effectively gives what is correct, its a bit
+ *   mis-leading compared to the TRM.  For the most general case the mask
+ *   needs to be also taken into account this does work in practice.
+ *   - for u-boot we currently map:
+ *       -- 0 to nothing,
+ *       -- 4 to flash
+ *       -- 8 to enent
+ *       -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+	u32 b;
+
+	b = __raw_readl(GPMC_CONFIG7_0);
+	b &= 0x1F;	 /* keep base [5:0] */
+	b = b << 24; /* ret 0x0b000000 */
+	return(b);
+}
+
+/*****************************************************************
+ *  is_gpmc_muxed() - tells if address/data lines are multiplexed
+ *****************************************************************/
+u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if (mux & BIT1)	   /* if mux'ed */
+		return(GPMC_MUXED);
+	else
+		return(GPMC_NONMUXED);
+}
+
+/************************************************************************
+ *  get_gpmc0_type() - read sysboot lines to see type of memory attached
+ ************************************************************************/
+u32 get_gpmc0_type(void)
+{
+	u32 type;
+	type = get_sysboot_value();
+	if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
+		return(TYPE_NAND);
+	else
+		return(TYPE_NOR);
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+	u32 width;
+	width = get_sysboot_value();
+	if ((width & 0xF) == (BIT3|BIT2))
+		return(WIDTH_8BIT);
+	else
+		return(WIDTH_16BIT);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ *   volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+	u32 i = 0, val;
+	do {
+		++i;
+		val = __raw_readl(read_addr) & read_bit_mask;
+		if (val == match_value)
+			return(1);
+		if (i==bound)
+			return(0);
+	} while (1);
+}
+
+/*********************************************************************
+ *  display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+	char cpu_2420[] = "2420";
+	char cpu_2422[] = "2422";
+	char db_men[] = "Menelaus";
+	char db_ip[]= "IP";
+	char *cpu_s, *db_s;
+	u32 cpu = get_cpu_type();
+
+	if(cpu == CPU_2420)
+		cpu_s = cpu_2420;
+	else
+		cpu_s = cpu_2422;
+	if(btype ==  BOARD_H4_MENELAUS)
+		db_s = db_men;
+	else
+		db_s = db_ip;
+	printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s);
+}
diff --git a/board/omap2420h4/u-boot.lds b/board/omap2420h4/u-boot.lds
new file mode 100644
index 00000000000..724c1dd48a2
--- /dev/null
+++ b/board/omap2420h4/u-boot.lds
@@ -0,0 +1,58 @@
+/*
+ * January 2004 - Changed to support H4 device 
+ * Copyright (c) 2004 Texas Instruments 
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm1136/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}